Download or read book Mathematical Theory of Reliability of Time Dependent Systems with Practical Applications written by Igor N. Kovalenko and published by John Wiley & Sons. This book was released on 1997-07-16 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the greatest problems in engineering is reliability. The performance of all machinery degrades over time and unless counteraction is taken at some point, any system will eventually fail. Once a system fails there are a number of possible solutions; the mathematical and statistical measurement and analysis of these solutions forms the mathematical theory of reliability. The aim of the authors is to concentrate on aspects of particular importance in the mathematical theory of reliability of time dependent systems rather than give a general overview. Particular emphasis is placed on fault tree analysis, Monte Carlo methods and importance measures. This book will be of particular interest to applied researchers and engineers working in areas where reliability is crucial. Contents Introduction, Markov and Semi-Markov models as a basis for the mathematical analysis of system reliability, methods for investigating homogeneous and non-homogeneous point processes (event flows), fault trees ? the current state of research, theory of redundant systems, Monte Carlo methods, reliability analysis using perturbation methods, stiff processes in reliability analysis, variance reduction methods, analytical-statistical methods for rapid simulation of repairable systems with structure redundancy, measures of reliability importance of components, index.

Download or read book Mathematical Theory of Reliability written by Richard E. Barlow and published by SIAM. This book was released on 1996-01-01 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents a survey of mathematical models useful in solving reliability problems. It includes a detailed discussion of life distributions corresponding to wearout and their use in determining maintenance policies, and covers important topics such as the theory of increasing (decreasing) failure rate distributions, optimum maintenance policies, and the theory of coherent systems. The emphasis throughout the book is on making minimal assumptions - and only those based on plausible physical considerations - so that the resulting mathematical deductions may be safely made about a large variety of commonly occurring reliability situations. The first part of the book is concerned with component reliability, while the second part covers system reliability, including problems that are as important today as they were in the 1960s. The enduring relevance of the subject of reliability and the continuing demand for a graduate-level book on this topic are the driving forces behind its re-publication.

Download or read book Statistical Methods in Diagnostic Medicine written by Xiao-Hua Zhou and published by John Wiley & Sons. This book was released on 2014-08-21 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the First Edition " . . . the book is a valuable addition to the literature in the field, serving as a much-needed guide for both clinicians and advanced students."—Zentralblatt MATH A new edition of the cutting-edge guide to diagnostic tests in medical research In recent years, a considerable amount of research has focused on evolving methods for designing and analyzing diagnostic accuracy studies. Statistical Methods in Diagnostic Medicine, Second Edition continues to provide a comprehensive approach to the topic, guiding readers through the necessary practices for understanding these studies and generalizing the results to patient populations. Following a basic introduction to measuring test accuracy and study design, the authors successfully define various measures of diagnostic accuracy, describe strategies for designing diagnostic accuracy studies, and present key statistical methods for estimating and comparing test accuracy. Topics new to the Second Edition include: Methods for tests designed to detect and locate lesions Recommendations for covariate-adjustment Methods for estimating and comparing predictive values and sample size calculations Correcting techniques for verification and imperfect standard biases Sample size calculation for multiple reader studies when pilot data are available Updated meta-analysis methods, now incorporating random effects Three case studies thoroughly showcase some of the questions and statistical issues that arise in diagnostic medicine, with all associated data provided in detailed appendices. A related web site features Fortran, SAS®, and R software packages so that readers can conduct their own analyses. Statistical Methods in Diagnostic Medicine, Second Edition is an excellent supplement for biostatistics courses at the graduate level. It also serves as a valuable reference for clinicians and researchers working in the fields of medicine, epidemiology, and biostatistics.

Download or read book Handbook of Monte Carlo Methods written by Dirk P. Kroese and published by John Wiley & Sons. This book was released on 2013-06-06 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of Monte Carlo simulation that explores the latest topics, techniques, and real-world applications More and more of today’s numerical problems found in engineering and finance are solved through Monte Carlo methods. The heightened popularity of these methods and their continuing development makes it important for researchers to have a comprehensive understanding of the Monte Carlo approach. Handbook of Monte Carlo Methods provides the theory, algorithms, and applications that helps provide a thorough understanding of the emerging dynamics of this rapidly-growing field. The authors begin with a discussion of fundamentals such as how to generate random numbers on a computer. Subsequent chapters discuss key Monte Carlo topics and methods, including: Random variable and stochastic process generation Markov chain Monte Carlo, featuring key algorithms such as the Metropolis-Hastings method, the Gibbs sampler, and hit-and-run Discrete-event simulation Techniques for the statistical analysis of simulation data including the delta method, steady-state estimation, and kernel density estimation Variance reduction, including importance sampling, latin hypercube sampling, and conditional Monte Carlo Estimation of derivatives and sensitivity analysis Advanced topics including cross-entropy, rare events, kernel density estimation, quasi Monte Carlo, particle systems, and randomized optimization The presented theoretical concepts are illustrated with worked examples that use MATLAB®, a related Web site houses the MATLAB® code, allowing readers to work hands-on with the material and also features the author's own lecture notes on Monte Carlo methods. Detailed appendices provide background material on probability theory, stochastic processes, and mathematical statistics as well as the key optimization concepts and techniques that are relevant to Monte Carlo simulation. Handbook of Monte Carlo Methods is an excellent reference for applied statisticians and practitioners working in the fields of engineering and finance who use or would like to learn how to use Monte Carlo in their research. It is also a suitable supplement for courses on Monte Carlo methods and computational statistics at the upper-undergraduate and graduate levels.

Download or read book Optimal Learning written by Warren B. Powell and published by John Wiley & Sons. This book was released on 2013-07-09 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the science of collecting information to make effective decisions Everyday decisions are made without the benefit of accurate information. Optimal Learning develops the needed principles for gathering information to make decisions, especially when collecting information is time-consuming and expensive. Designed for readers with an elementary background in probability and statistics, the book presents effective and practical policies illustrated in a wide range of applications, from energy, homeland security, and transportation to engineering, health, and business. This book covers the fundamental dimensions of a learning problem and presents a simple method for testing and comparing policies for learning. Special attention is given to the knowledge gradient policy and its use with a wide range of belief models, including lookup table and parametric and for online and offline problems. Three sections develop ideas with increasing levels of sophistication: Fundamentals explores fundamental topics, including adaptive learning, ranking and selection, the knowledge gradient, and bandit problems Extensions and Applications features coverage of linear belief models, subset selection models, scalar function optimization, optimal bidding, and stopping problems Advanced Topics explores complex methods including simulation optimization, active learning in mathematical programming, and optimal continuous measurements Each chapter identifies a specific learning problem, presents the related, practical algorithms for implementation, and concludes with numerous exercises. A related website features additional applications and downloadable software, including MATLAB and the Optimal Learning Calculator, a spreadsheet-based package that provides an introduction to learning and a variety of policies for learning.

Download or read book Clinical Trial Design written by Guosheng Yin and published by John Wiley & Sons. This book was released on 2013-06-07 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: A balanced treatment of the theories, methodologies, and design issues involved in clinical trials using statistical methods There has been enormous interest and development in Bayesian adaptive designs, especially for early phases of clinical trials. However, for phase III trials, frequentist methods still play a dominant role through controlling type I and type II errors in the hypothesis testing framework. From practical perspectives, Clinical Trial Design: Bayesian and Frequentist Adaptive Methods provides comprehensive coverage of both Bayesian and frequentist approaches to all phases of clinical trial design. Before underpinning various adaptive methods, the book establishes an overview of the fundamentals of clinical trials as well as a comparison of Bayesian and frequentist statistics. Recognizing that clinical trial design is one of the most important and useful skills in the pharmaceutical industry, this book provides detailed discussions on a variety of statistical designs, their properties, and operating characteristics for phase I, II, and III clinical trials as well as an introduction to phase IV trials. Many practical issues and challenges arising in clinical trials are addressed. Additional topics of coverage include: Risk and benefit analysis for toxicity and efficacy trade-offs Bayesian predictive probability trial monitoring Bayesian adaptive randomization Late onset toxicity and response Dose finding in drug combination trials Targeted therapy designs The author utilizes cutting-edge clinical trial designs and statistical methods that have been employed at the world's leading medical centers as well as in the pharmaceutical industry. The software used throughout the book is freely available on the book's related website, equipping readers with the necessary tools for designing clinical trials. Clinical Trial Design is an excellent book for courses on the topic at the graduate level. The book also serves as a valuable reference for statisticians and biostatisticians in the pharmaceutical industry as well as for researchers and practitioners who design, conduct, and monitor clinical trials in their everyday work.

Download or read book Preparing for the Worst written by Hrishikesh (Rick) D. Vinod and published by John Wiley & Sons. This book was released on 2004-11-11 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely approach to downside risk and its role in stock market investments When dealing with the topic of risk analysis, most books on investments treat downside and upside risk equally. Preparing for the Worst takes an entirely novel approach by focusing on downside risk and explaining how to incorporate it into investment decisions. Highlighting this asymmetry of the stock market, the authors describe how existing theories miss the downside and follow with explanations of how it can be included. Various techniques for calculating downside risk are demonstrated. This book presents the latest ideas in the field from the ground up, making the discussion accessible to mathematicians and statisticians interested in applications in finance, as well as to finance professionals who may not have a mathematical background. An invaluable resource for anyone wishing to explore the critical issues of finance, portfolio management, and securities pricing, this book: Incorporates Value at Risk into the theoretical discussion Uses many examples to illustrate downside risk in U.S., international, and emerging market investments Addresses downside risk arising from fraud and corruption Includes step-by-step instructions on how to implement the methods introduced in this book Offers advice on how to avoid pitfalls in calculations and computer programming Provides software use information and tips

Download or read book Generalized Inference in Repeated Measures written by Samaradasa Weerahandi and published by John Wiley & Sons. This book was released on 2004-08-24 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete guide to powerful and practical statistical modeling using MANOVA Numerous statistical applications are time dependent. Virtually all biomedical, pharmaceutical, and industrial experiments demand repeated measurements over time. The same holds true for market research and analysis. Yet conventional methods, such as the Repeated Measures Analysis of Variance (Rm ANOVA), do not always yield exact solutions, obliging practitioners to settle for asymptotic results and approximate solutions. Generalized inference in Multivariate Analysis of Variance (MANOVA), mixed models, and growth curves offer exact methods of data analysis under milder conditions without deviating from the conventional philosophy of statistical inference. Generalized Inference in Repeated Measures is a concise, self-contained guide to the use of these innovative solutions, presenting them as extensions of–rather than alternatives to–classical methods of statistical evaluation. Requiring minimal prior knowledge of statistical concepts in the evaluation of linear models, the book provides exact parametric methods for each application considered, with solutions presented in terms of generalized p-values. Coverage includes: New concepts in statistical inference, with special focus on generalized p-values and generalized confidence intervals One-way and two-way ANOVA, in cases of equal and unequal variances Basic and higher-way mixed models, including testing and estimation of fixed effects and variance components Multivariate populations, including basic inference, comparison, and analysis of variance Basic, widely used repeated measures models including crossover designs and growth curves With a comprehensive set of formulas, illustrative examples, and exercises in each chapter, Generalized Inference in Repeated Measures is ideal as both a comprehensive reference for research professionals and a text for students.

Download or read book A Primer on Experiments with Mixtures written by John A. Cornell and published by John Wiley & Sons. This book was released on 2011-09-26 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concise yet authoritative presentation of key techniques for basic mixtures experiments Inspired by the author's bestselling advanced book on the topic, A Primer on Experiments with Mixtures provides an introductory presentation of the key principles behind experimenting with mixtures. Outlining useful techniques through an applied approach with examples from real research situations, the book supplies a comprehensive discussion of how to design and set up basic mixture experiments, then analyze the data and draw inferences from results. Drawing from his extensive experience teaching the topic at various levels, the author presents the mixture experiments in an easy-to-follow manner that is void of unnecessary formulas and theory. Succinct presentations explore key methods and techniques for carrying out basic mixture experiments, including: Designs and models for exploring the entire simplex factor space, with coverage of simplex-lattice and simplex-centroid designs, canonical polynomials, the plotting of individual residuals, and axial designs Multiple constraints on the component proportions in the form of lower and/or upper bounds, introducing L-Pseudocomponents, multicomponent constraints, and multiple lattice designs for major and minor component classifications Techniques for analyzing mixture data such as model reduction and screening components, as well as additional topics such as measuring the leverage of certain design points Models containing ratios of the components, Cox's mixture polynomials, and the fitting of a slack variable model A review of least squares and the analysis of variance for fitting data Each chapter concludes with a summary and appendices with details on the technical aspects of the material. Throughout the book, exercise sets with selected answers allow readers to test their comprehension of the material, and References and Recommended Reading sections outline further resources for study of the presented topics. A Primer on Experiments with Mixtures is an excellent book for one-semester courses on mixture designs and can also serve as a supplement for design of experiments courses at the upper-undergraduate and graduate levels. It is also a suitable reference for practitioners and researchers who have an interest in experiments with mixtures and would like to learn more about the related mixture designs and models.

Download or read book Approximate Dynamic Programming written by Warren B. Powell and published by John Wiley & Sons. This book was released on 2011-10-26 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the First Edition "Finally, a book devoted to dynamic programming and written using the language of operations research (OR)! This beautiful book fills a gap in the libraries of OR specialists and practitioners." —Computing Reviews This new edition showcases a focus on modeling and computation for complex classes of approximate dynamic programming problems Understanding approximate dynamic programming (ADP) is vital in order to develop practical and high-quality solutions to complex industrial problems, particularly when those problems involve making decisions in the presence of uncertainty. Approximate Dynamic Programming, Second Edition uniquely integrates four distinct disciplines—Markov decision processes, mathematical programming, simulation, and statistics—to demonstrate how to successfully approach, model, and solve a wide range of real-life problems using ADP. The book continues to bridge the gap between computer science, simulation, and operations research and now adopts the notation and vocabulary of reinforcement learning as well as stochastic search and simulation optimization. The author outlines the essential algorithms that serve as a starting point in the design of practical solutions for real problems. The three curses of dimensionality that impact complex problems are introduced and detailed coverage of implementation challenges is provided. The Second Edition also features: A new chapter describing four fundamental classes of policies for working with diverse stochastic optimization problems: myopic policies, look-ahead policies, policy function approximations, and policies based on value function approximations A new chapter on policy search that brings together stochastic search and simulation optimization concepts and introduces a new class of optimal learning strategies Updated coverage of the exploration exploitation problem in ADP, now including a recently developed method for doing active learning in the presence of a physical state, using the concept of the knowledge gradient A new sequence of chapters describing statistical methods for approximating value functions, estimating the value of a fixed policy, and value function approximation while searching for optimal policies The presented coverage of ADP emphasizes models and algorithms, focusing on related applications and computation while also discussing the theoretical side of the topic that explores proofs of convergence and rate of convergence. A related website features an ongoing discussion of the evolving fields of approximation dynamic programming and reinforcement learning, along with additional readings, software, and datasets. Requiring only a basic understanding of statistics and probability, Approximate Dynamic Programming, Second Edition is an excellent book for industrial engineering and operations research courses at the upper-undergraduate and graduate levels. It also serves as a valuable reference for researchers and professionals who utilize dynamic programming, stochastic programming, and control theory to solve problems in their everyday work.

Download or read book Statistics for Imaging Optics and Photonics written by Peter Bajorski and published by John Wiley & Sons. This book was released on 2011-10-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: A vivid, hands-on discussion of the statistical methods in imaging, optics, and photonics applications In the field of imaging science, there is a growing need for students and practitioners to be equipped with the necessary knowledge and tools to carry out quantitative analysis of data. Providing a self-contained approach that is not too heavily statistical in nature, Statistics for Imaging, Optics, and Photonics presents necessary analytical techniques in the context of real examples from various areas within the field, including remote sensing, color science, printing, and astronomy. Bridging the gap between imaging, optics, photonics, and statistical data analysis, the author uniquely concentrates on statistical inference, providing a wide range of relevant methods. Brief introductions to key probabilistic terms are provided at the beginning of the book in order to present the notation used, followed by discussions on multivariate techniques such as: Linear regression models, vector and matrix algebra, and random vectors and matrices Multivariate statistical inference, including inferences about both mean vectors and covariance matrices Principal components analysis Canonical correlation analysis Discrimination and classification analysis for two or more populations and spatial smoothing Cluster analysis, including similarity and dissimilarity measures and hierarchical and nonhierarchical clustering methods Intuitive and geometric understanding of concepts is emphasized, and all examples are relatively simple and include background explanations. Computational results and graphs are presented using the freely available R software, and can be replicated by using a variety of software packages. Throughout the book, problem sets and solutions contain partial numerical results, allowing readers to confirm the accuracy of their approach; and a related website features additional resources including the book's datasets and figures. Statistics for Imaging, Optics, and Photonics is an excellent book for courses on multivariate statistics for imaging science, optics, and photonics at the upper-undergraduate and graduate levels. The book also serves as a valuable reference for professionals working in imaging, optics, and photonics who carry out data analyses in their everyday work.

Download or read book Sampling written by Steven K. Thompson and published by John Wiley & Sons. This book was released on 2012-02-08 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the Second Edition "This book has never had a competitor. It is the only book that takes a broad approach to sampling . . . any good personal statistics library should include a copy of this book." —Technometrics "Well-written . . . an excellent book on an important subject. Highly recommended." —Choice "An ideal reference for scientific researchers and other professionals who use sampling." —Zentralblatt Math Features new developments in the field combined with all aspects of obtaining, interpreting, and using sample data Sampling provides an up-to-date treatment of both classical and modern sampling design and estimation methods, along with sampling methods for rare, clustered, and hard-to-detect populations. This Third Edition retains the general organization of the two previous editions, but incorporates extensive new material—sections, exercises, and examples—throughout. Inside, readers will find all-new approaches to explain the various techniques in the book; new figures to assist in better visualizing and comprehending underlying concepts such as the different sampling strategies; computing notes for sample selection, calculation of estimates, and simulations; and more. Organized into six sections, the book covers basic sampling, from simple random to unequal probability sampling; the use of auxiliary data with ratio and regression estimation; sufficient data, model, and design in practical sampling; useful designs such as stratified, cluster and systematic, multistage, double and network sampling; detectability methods for elusive populations; spatial sampling; and adaptive sampling designs. Featuring a broad range of topics, Sampling, Third Edition serves as a valuable reference on useful sampling and estimation methods for researchers in various fields of study, including biostatistics, ecology, and the health sciences. The book is also ideal for courses on statistical sampling at the upper-undergraduate and graduate levels.

Download or read book Empirical Model Building written by James R. Thompson and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the First Edition "This...novel and highly stimulating book, which emphasizes solving real problems...should be widely read. It will have a positive and lasting effect on the teaching of modeling and statistics in general." - Short Book Reviews This new edition features developments and real-world examples that showcase essential empirical modeling techniques Successful empirical model building is founded on the relationship between data and approximate representations of the real systems that generated that data. As a result, it is essential for researchers who construct these models to possess the special skills and techniques for producing results that are insightful, reliable, and useful. Empirical Model Building: Data, Models, and Reality, Second Edition presents a hands-on approach to the basic principles of empirical model building through a shrewd mixture of differential equations, computer-intensive methods, and data. The book outlines both classical and new approaches and incorporates numerous real-world statistical problems that illustrate modeling approaches that are applicable to a broad range of audiences, including applied statisticians and practicing engineers and scientists. The book continues to review models of growth and decay, systems where competition and interaction add to the complextiy of the model while discussing both classical and non-classical data analysis methods. This Second Edition now features further coverage of momentum based investing practices and resampling techniques, showcasing their importance and expediency in the real world. The author provides applications of empirical modeling, such as computer modeling of the AIDS epidemic to explain why North America has most of the AIDS cases in the First World and data-based strategies that allow individual investors to build their own investment portfolios. Throughout the book, computer-based analysis is emphasized and newly added and updated exercises allow readers to test their comprehension of the presented material. Empirical Model Building, Second Edition is a suitable book for modeling courses at the upper-undergraduate and graduate levels. It is also an excellent reference for applied statisticians and researchers who carry out quantitative modeling in their everyday work.

Download or read book The Statistical Analysis of Failure Time Data written by John D. Kalbfleisch and published by John Wiley & Sons. This book was released on 2002-09-09 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Contains additional discussion and examples on left truncation as well as material on more general censoring and truncation patterns. * Introduces the martingale and counting process formulation swil lbe in a new chapter. * Develops multivariate failure time data in a separate chapter and extends the material on Markov and semi Markov formulations. * Presents new examples and applications of data analysis.

Download or read book Analyzing Microarray Gene Expression Data written by Geoffrey J. McLachlan and published by John Wiley & Sons. This book was released on 2005-02-18 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: A multi-discipline, hands-on guide to microarray analysis of biological processes Analyzing Microarray Gene Expression Data provides a comprehensive review of available methodologies for the analysis of data derived from the latest DNA microarray technologies. Designed for biostatisticians entering the field of microarray analysis as well as biologists seeking to more effectively analyze their own experimental data, the text features a unique interdisciplinary approach and a combined academic and practical perspective that offers readers the most complete and applied coverage of the subject matter to date. Following a basic overview of the biological and technical principles behind microarray experimentation, the text provides a look at some of the most effective tools and procedures for achieving optimum reliability and reproducibility of research results, including: An in-depth account of the detection of genes that are differentially expressed across a number of classes of tissues Extensive coverage of both cluster analysis and discriminant analysis of microarray data and the growing applications of both methodologies A model-based approach to cluster analysis, with emphasis on the use of the EMMIX-GENE procedure for the clustering of tissue samples The latest data cleaning and normalization procedures The uses of microarray expression data for providing important prognostic information on the outcome of disease

Download or read book Spatial Statistics written by Brian D. Ripley and published by John Wiley & Sons. This book was released on 2005-02-25 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Wiley-Interscience Paperback Series consists of selected booksthat have been made more accessible to consumers in an effort toincrease global appeal and general circulation. With these newunabridged softcover volumes, Wiley hopes to extend the lives ofthese works by making them available to future generations ofstatisticians, mathematicians, and scientists. "Books such as this that bring together, clarify, and summarizerecent research can lead to a great increase of interest in thearea. . . . a major achievement in describing many aspects ofspatial data and discussing, with examples, different methods ofanalysis." –Royal Statistical Society "Dr. Ripley’s book is an excellent survey of the spatialstatistical methodology. It is very well illustrated with examples[that] give a clear view of the wide scope of the subject, the wayin which techniques often have to be tailored to particularapplications, and the different sorts of spatial data thatarise." –The Bulletin of the London Mathematics Society Spatial Statistics provides a comprehensive guide to theanalysis of spatial data. Each chapter covers a particular dataformat and the associated class of problems, introducing theory,giving computational suggestions, and providing examples. Methodsare illustrated by computer-drawn figures. The book serves as anintroduction to this rapidly growing research area formathematicians and statisticians, and as a reference to newcomputer methods for researchers in ecology, geology, archaeology,and the earth sciences.

Download or read book Discriminant Analysis and Statistical Pattern Recognition written by Geoffrey McLachlan and published by John Wiley & Sons. This book was released on 2005-02-25 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Wiley-Interscience Paperback Series consists of selected books that have been made more accessible to consumers in an effort to increase global appeal and general circulation. With these new unabridged softcover volumes, Wiley hopes to extend the lives of these works by making them available to future generations of statisticians, mathematicians, and scientists. "For both applied and theoretical statisticians as well as investigators working in the many areas in which relevant use can be made of discriminant techniques, this monograph provides a modern, comprehensive, and systematic account of discriminant analysis, with the focus on the more recent advances in the field." –SciTech Book News ". . . a very useful source of information for any researcher working in discriminant analysis and pattern recognition." –Computational Statistics Discriminant Analysis and Statistical Pattern Recognition provides a systematic account of the subject. While the focus is on practical considerations, both theoretical and practical issues are explored. Among the advances covered are regularized discriminant analysis and bootstrap-based assessment of the performance of a sample-based discriminant rule, and extensions of discriminant analysis motivated by problems in statistical image analysis. The accompanying bibliography contains over 1,200 references.