Download or read book Mathematical modeling of fluid flow and heat transfer in geothermal systems an introduction in five lectures written by Karsten Pruess and published by . This book was released on 2002 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Modeling of Fluid Flow and Heat Transfer in Petroleum Industries and Geothermal Applications written by Mehrdad Massoudi and published by MDPI. This book was released on 2020-04-16 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal energy is the thermal energy generated and stored in the Earth's core, mantle, and crust. Geothermal technologies are used to generate electricity and to heat and cool buildings. To develop accurate models for heat and mass transfer applications involving fluid flow in geothermal applications or reservoir engineering and petroleum industries, a basic knowledge of the rheological and transport properties of the materials involved (drilling fluid, rock properties, etc.)—especially in high-temperature and high-pressure environments—are needed. This Special Issue considers all aspects of fluid flow and heat transfer in geothermal applications, including the ground heat exchanger, conduction and convection in porous media. The emphasis here is on mathematical and computational aspects of fluid flow in conventional and unconventional reservoirs, geothermal engineering, fluid flow, and heat transfer in drilling engineering and enhanced oil recovery (hydraulic fracturing, CO2 injection, etc.) applications.
Download or read book Mathematical Modeling of Fluid Flow and Heat Transfer in Petroleum Industries and Geothermal Applications written by Mehrdad Massoudi and published by . This book was released on 2020 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal energy is the thermal energy generated and stored in the Earth's core, mantle, and crust. Geothermal technologies are used to generate electricity and to heat and cool buildings. To develop accurate models for heat and mass transfer applications involving fluid flow in geothermal applications or reservoir engineering and petroleum industries, a basic knowledge of the rheological and transport properties of the materials involved (drilling fluid, rock properties, etc.)--especially in high-temperature and high-pressure environments--are needed. This Special Issue considers all aspects of fluid flow and heat transfer in geothermal applications, including the ground heat exchanger, conduction and convection in porous media. The emphasis here is on mathematical and computational aspects of fluid flow in conventional and unconventional reservoirs, geothermal engineering, fluid flow, and heat transfer in drilling engineering and enhanced oil recovery (hydraulic fracturing, CO2 injection, etc.) applications.
Download or read book Applications of Mathematical Heat Transfer and Fluid Flow Models in Engineering and Medicine written by Abram S. Dorfman and published by John Wiley & Sons. This book was released on 2017-02-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of mathematical heat transfer and fluid flow models in engineering and medicine Abram S. Dorfman, University of Michigan, USA Engineering and medical applications of cutting-edge heat and flow models This book presents innovative efficient methods in fluid flow and heat transfer developed and widely used over the last fifty years. The analysis is focused on mathematical models which are an essential part of any research effort as they demonstrate the validity of the results obtained. The universality of mathematics allows consideration of engineering and biological problems from one point of view using similar models. In this book, the current situation of applications of modern mathematical models is outlined in three parts. Part I offers in depth coverage of the applications of contemporary conjugate heat transfer models in various industrial and technological processes, from aerospace and nuclear reactors to drying and food processing. In Part II the theory and application of two recently developed models in fluid flow are considered: the similar conjugate model for simulation of biological systems, including flows in human organs, and applications of the latest developments in turbulence simulation by direct solution of Navier-Stokes equations, including flows around aircraft. Part III proposes fundamentals of laminar and turbulent flows and applied mathematics methods. The discussion is complimented by 365 examples selected from a list of 448 cited papers, 239 exercises and 136 commentaries. Key features: Peristaltic flows in normal and pathologic human organs. Modeling flows around aircraft at high Reynolds numbers. Special mathematical exercises allow the reader to complete expressions derivation following directions from the text. Procedure for preliminary choice between conjugate and common simple methods for particular problem solutions. Criterions of conjugation, definition of semi-conjugate solutions. This book is an ideal reference for graduate and post-graduate students and engineers.
Download or read book Reactive Flow Modeling of Hydrothermal Systems written by Michael Kühn and published by Springer. This book was released on 2004-03-24 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the topic of geochemical modeling of fluids in subsurface and hydrothermal systems. The intention is to serve as a textbook for graduate students in aqueous, environmental and groundwater geochemistry, despite the fact that its focus is on the special topic of geochemistry in hydrothermal systems, it also provides new insights for experienced researchers with respect to the topic of reactive transport. The overall purpose is to give the reader an understanding of the processes that control the chemical composition of waters in hydrothermal systems and to highlight the interfaces between chemistry, geothermics and hydrogeology. From the reviews: "..is a nice, compact introduction to the principles of modeling coupled fluid flow and fluid-mineral reactions in active geothermal systems, as used for heating and electricity generation." ( Christoph A. Heinrich, ECONOMIC GEOLOGY, June 2004)
Download or read book Multiphase Fluid Flow in Porous and Fractured Reservoirs written by Yu-Shu Wu and published by Gulf Professional Publishing. This book was released on 2015-09-23 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Fluid Flow in Porous and Fractured Reservoirs discusses the process of modeling fluid flow in petroleum and natural gas reservoirs, a practice that has become increasingly complex thanks to multiple fractures in horizontal drilling and the discovery of more unconventional reservoirs and resources. The book updates the reservoir engineer of today with the latest developments in reservoir simulation by combining a powerhouse of theory, analytical, and numerical methods to create stronger verification and validation modeling methods, ultimately improving recovery in stagnant and complex reservoirs. Going beyond the standard topics in past literature, coverage includes well treatment, Non-Newtonian fluids and rheological models, multiphase fluid coupled with geomechanics in reservoirs, and modeling applications for unconventional petroleum resources. The book equips today’s reservoir engineer and modeler with the most relevant tools and knowledge to establish and solidify stronger oil and gas recovery. Delivers updates on recent developments in reservoir simulation such as modeling approaches for multiphase flow simulation of fractured media and unconventional reservoirs Explains analytical solutions and approaches as well as applications to modeling verification for today’s reservoir problems, such as evaluating saturation and pressure profiles and recovery factors or displacement efficiency Utilize practical codes and programs featured from online companion website
Download or read book Physical Modeling and Computational Techniques for Thermal and Fluid dynamics written by Maurizio Bottoni and published by Springer Nature. This book was released on 2021-11-12 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on computational techniques for thermal and fluid-dynamic problems arose from seminars given by the author at the Institute of Nuclear Energy Technology of Tsinghua University in Beijing, China. The book is composed of eight chapters-- some of which are characterized by a scholastic approach, others are devoted to numerical solution of ordinary differential equations of first order, and of partial differential equations of first and second order, respectively. In Chapter IV, basic concepts of consistency, stability and convergence of discretization algorithms are covered in some detail. Other parts of the book follow a less conventional approach, mainly informed by the author’s experience in teaching and development of computer programs. Among these is Chapter III, where the residual method of Orthogonal Collocations is presented in several variants, ranging from the classical Galerkin method to Point and Domain Collocations, applied to numerical solution of partial differential equations of first order. In most cases solutions of fluid dynamic problems are led through the discretization process, to the numerical solutions of large linear systems. Intended to impart a basic understanding of numerical techniques that would enable readers to deal with problems of Computational Fluid Dynamics at research level, the book is ideal as a reference for graduate students, researchers, and practitioners.
Download or read book Energy Waste and the Environment written by R. Gieré and published by Geological Society of London. This book was released on 2004 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides incentives for further development of sustainable fuel cycles through a novel and interdisciplinary approach to an Earth science-related topic. The main focus is on geochemical concepts in immobilizing, isolating or neutralizing waste derived from energy production and consumption. The book also addresses the issue of using some types of energy-derived waste as alternative raw materials. Moreover, it highlights research on how certain wastes can be used for energy production, an increasingly important aspect of modern integrated waste management strategies. The main objectives are to: (a) identify the most serious environmental problems related to various types of power generation and associated waste accumulation; (b) present strategies, based on natural analogue materials, for the immobilization of toxic and radioactive waste components through mineralogical barriers; (c) discuss modern procedures for reuse of waste or certain waste components; and (d) review the importance of geochemical modelling in describing and predicting the interaction between waste and the environment.
Download or read book Annual Report written by United Nations University and published by . This book was released on 2002 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactive Flow Modeling of Hydrothermal Systems written by Michael Kuhn and published by Springer. This book was released on 2014-01-15 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the topic of geochemical modeling of fluids in subsurface and hydrothermal systems. The intention is to serve as a textbook for graduate students in aqueous, environmental and groundwater geochemistry, despite the fact that its focus is on the special topic of geochemistry in hydrothermal systems, it also provides new insights for experienced researchers with respect to the topic of reactive transport. The overall purpose is to give the reader an understanding of the processes that control the chemical composition of waters in hydrothermal systems and to highlight the interfaces between chemistry, geothermics and hydrogeology. From the reviews: .."is a nice, compact introduction to the principles of modeling coupled fluid flow and fluid-mineral reactions in active geothermal systems, as used for heating and electricity generation." ( Christoph A. Heinrich, ECONOMIC GEOLOGY, June 2004)
Download or read book Mathematical modelling of fluid mechanics heat transfer and chemical reaction processes written by Dudley Brian Spalding and published by . This book was released on 1980 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Mathematical Modelling Applied Analysis and Computation written by Jagdev Singh and published by Springer Nature. This book was released on 2022-10-13 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a valuable source for graduate students and researchers and provides a comprehensive introduction to recent theories and applications of mathematical modeling and numerical simulation. It includes selected peer-reviewed papers presented at the 4th International Conference on Mathematical Modelling, Applied Analysis and Computation (ICMMAAC 2021), held at JECRC University, Jaipur, India, during August 5–7, 2021. The book is focused on mathematical modeling of various problems arising in science and engineering and new efficient numerical approaches for solving linear nonlinear problems and rigorous mathematical theories, which can be used to analyze different kinds of mathematical models. Applications of mathematical methods in physics, chemistry, biology, mechanical engineering, civil engineering, computer science, social science, and finance are presented.
Download or read book FLUID FLOW AND HEAT TRANSFER IN STRATIFIED SYSTEMS written by Marvin LaVerne Katz and published by . This book was released on 1960 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Analytic Method in Flows and Heat Transfer written by R. A. Bernatz and published by CRC Press. This book was released on 2020-08-11 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the fundamental development of the finite analytic method and gives a systematic coverage of knowledge needed for numerical computation of fluid flows and heat transfer. It will be helpful to many including graduate students studying computational fluid dynamics and heat transfer.
Download or read book fluid flow and heat transfer in stratified system written by marvin l. katz and published by . This book was released on 1960 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical modelling of fluid mechanics heat transfer and chemical reaction processes written by Dudley Brian Spalding and published by . This book was released on 1980 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application to Fluid Dynamics of the Theory of Reversible Heat Addition written by Barrett Stone Baldwin and published by . This book was released on 1959 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
