Download or read book Engineering Materials Technology written by James A. Jacobs and published by Prentice Hall. This book was released on 1985 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Skills in Resistant Materials Technology written by Peter Gale and published by Heinemann. This book was released on 1999 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This pupil book, written specifically to cover Key Stage 3 curriculum needs, helps pupils acquire knowledge and understanding of resistant materials and the products made from them. Full instructions are given to give pupils practice in using different tools and processes.
Download or read book Materials Technology written by Yvonne Dean and published by Routledge. This book was released on 2016-07-01 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Technology clearly identifies materials and technology as the fundamental generators of buildings and examines how they determine the structure, overall form and quality. It examines the issues that determine the choice of materials, and argues that the decision-making of architects, engineers and designers should take account of the environmental impact of sourcing the basic materials, and of the energy implications of their processing and use in manufacturing. Materials Technology is an essential resource for Materials Technology units in building, architecture and surveying degree and postgraduate courses; and students of BTEC HNC/D building and surveying. It will also be a useful reference tool for Advanced GNVQ Construction and the Built Environment courses and Built Environment NVQs at levels 3 and 4.
Download or read book Ancient Egyptian Materials and Technology written by Paul T. Nicholson and published by Cambridge University Press. This book was released on 2000-03-23 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes current research into all aspects of craftwork in ancient Egypt.
Download or read book Asphalt Materials Science and Technology written by James G. Speight and published by Butterworth-Heinemann. This book was released on 2015-10-01 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt is a complex but popular civil engineering material. Design engineers must understand these complexities in order to optimize its use. Whether or not it is used to pave a busy highway, waterproof a rooftop or smooth out an airport runway, Asphalt Materials Science and Technology acquaints engineers with the issues and technologies surrounding the proper selection and uses of asphalts. With this book in hand, researchers and engineering will find a valuable guide to the production, use and environmental aspect of asphalt. - Covers the Nomenclature and Terminology for Asphalt including: Performance Graded (PG) Binders, Asphalt Cement (AC), Asphalt-Rubber (A-R) Binder, Asphalt Emulsion and Cutback Asphalt - Includes Material Selection Considerations, Testing, and applications - Biodegradation of Asphalt and environmental aspects of asphalt use
Download or read book Composite Materials Technology written by S.M. Sapuan and published by CRC Press. This book was released on 2009-12-23 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial neural networks (ANN) can provide new insight into the study of composite materials and can normally be combined with other artificial intelligence tools such as expert system, genetic algorithm, and fuzzy logic. Because research on this field is very new, there is only a limited amount of published literature on the subject.Compiling in
Download or read book Advances in Materials Technology for Fossil Power Plants written by D. Gandy and J. Shingledecker and published by ASM International. This book was released on 2014-01-01 with total page 1520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference proceedings covering the latest technology developments for fossil fuel power plants, including nickel-based alloys for advanced ultrasupercritical power plants, materials for turbines, oxidation and corrosion, welding and weld performance, new alloys concepts, and creep and general topics.
Download or read book Materials Technology written by Robert Snedden and published by Capstone Classroom. This book was released on 2007 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series, available for the first time in paperback, explores aspects of change in materials, including material characteristics and states of matter. It also covers uses, material processes, and the technology used to make or alter materials. Experiment boxes, activities, and profiles of famous scientists and discoveries round out each book.
Download or read book Thin Film Materials Technology written by Kiyotaka Wasa and published by . This book was released on 2004 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technology for the United States Navy and Marine Corps 2000 2035 written by and published by National Academies. This book was released on 1997 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The future national security environment will present the naval forces with operational challenges that can best be met through the development of military capabilities that effectively leverage rapidly advancing technologies in many areas. The panel envisions a world where the naval forces will perform missions in the future similar to those they have historically undertaken. These missions will continue to include sea control, deterrence, power projection, sea lift, and so on. The missions will be accomplished through the use of platforms (ships, submarines, aircraft, and spacecraft), weapons (guns, missiles, bombs, torpedoes, and information), manpower, materiel, tactics, and processes (acquisition, logistics, and so on.). Accordingly, the Panel on Technology attempted to identify those technologies that will be of greatest importance to the future operations of the naval forces and to project trends in their development out to the year 2035. The primary objective of the panel was to determine which are the most critical technologies for the Department of the Navy to pursue to ensure U.S. dominance in future naval operations and to determine the future trends in these technologies and their impact on Navy and Marine Corps superiority. A vision of future naval operations ensued from this effort. These technologies form the base from which products, platforms, weapons, and capabilities are built. By combining multiple technologies with their future attributes, new systems and subsystems can be envisioned. Technology for the United States Navy and Marine Corps, 2000-2035 Becoming a 21st-Century Force: Volume 2: Technology indentifies those technologies that are unique to the naval forces and whose development the Department of the Navy clearly must fund, as well as commercially dominated technologies that the panel believes the Navy and Marine Corps must learn to adapt as quickly as possible to naval applications. Since the development of many of the critical technologies is becoming global in nature, some consideration is given to foreign capabilities and trends as a way to assess potential adversaries' capabilities. Finally, the panel assessed the current state of the science and technology (S&T) establishment and processes within the Department of the Navy and makes recommendations that would improve the efficiency and effectiveness of this vital area. The panel's findings and recommendations are presented in this report.
Download or read book Plasma Jets in the Development of New Materials Technology written by O. P. Solonenko and published by VSP. This book was released on 1990 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demands of industry for creating new functional materials with predetermined properties have stimulated an increasing interest in the investigation of processes occurring in plasma jets of complex chemical composition (homogeneous and heterogeneous) as well as their interaction with hard surfaces. This Proceedings volume contains contributions from leading international specialists on plasma science and technology which were presented at the 2nd International Workshop ''Plasma Jets in the Development in of New Materials Technology'', 3--9 September 1990, Frunze (USSR). The scope of the workshop incorporated the following aspects: -- modelling of the processes of momentum heat and mass transfer in homogeneous and heterogeneous plasma jets as well as interaction between the particles and the base; -- diagnostics of the parameters of gas and disperse phases in plasma flows; -- plasma-spraying processes investigations; -- processes of treatment and production of materials, including powder materials.
Download or read book Materials for Information Technology written by Ehrenfried Zschech and published by Springer Science & Business Media. This book was released on 2006-07-02 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an up to date survey of the state of the art of research into the materials used in information technology, and will be bought by researchers in universities, institutions as well as research workers in the semiconductor and IT industries.
Download or read book Advances in Mechanical and Materials Technology written by Kannan Govindan and published by Springer Nature. This book was released on 2022-01-01 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select papers from the International Conference on Energy, Material Sciences and Mechanical Engineering (EMSME) - 2020. The book covers the three core areas of energy, material sciences and mechanical engineering. The topics covered include non-conventional energy resources, energy harvesting, polymers, composites, 2D materials, systems engineering, materials engineering, micro-machining, renewable energy, industrial engineering and additive manufacturing. This book will be useful to researchers and professionals working in the areas of mechanical and industrial engineering, materials applications, and energy technology.
Download or read book 1995 Federal Research and Development Program in Materials Science and Technology written by National Science and Technology Council (U.S.). Materials Technology Subcommittee and published by . This book was released on 1995 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Structural Materials Technologies written by and published by . This book was released on 1986 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Materials Processes and Methods Technology written by Mel Schwartz and published by CRC Press. This book was released on 2005-11-04 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials selection is a crucial factor in determining the cost, quality, and corrosion protection for every engineering project. The variety of increasingly durable materials and their combinations, coupled with the rise of new and more critical service requirements and the demand for lower costs, have expanded upon trial-and-error criteria into m
Download or read book Handbook of Silicon Based MEMS Materials and Technologies written by Markku Tilli and published by Elsevier. This book was released on 2009-12-08 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to MEMS materials, technologies and manufacturing, examining the state of the art with a particular emphasis on current and future applications. Key topics covered include: - Silicon as MEMS material - Material properties and measurement techniques - Analytical methods used in materials characterization - Modeling in MEMS - Measuring MEMS - Micromachining technologies in MEMS - Encapsulation of MEMS components - Emerging process technologies, including ALD and porous silicon Written by 73 world class MEMS contributors from around the globe, this volume covers materials selection as well as the most important process steps in bulk micromachining, fulfilling the needs of device design engineers and process or development engineers working in manufacturing processes. It also provides a comprehensive reference for the industrial R&D and academic communities. - Veikko Lindroos is Professor of Physical Metallurgy and Materials Science at Helsinki University of Technology, Finland. - Markku Tilli is Senior Vice President of Research at Okmetic, Vantaa, Finland. - Ari Lehto is Professor of Silicon Technology at Helsinki University of Technology, Finland. - Teruaki Motooka is Professor at the Department of Materials Science and Engineering, Kyushu University, Japan. - Provides vital packaging technologies and process knowledge for silicon direct bonding, anodic bonding, glass frit bonding, and related techniques - Shows how to protect devices from the environment and decrease package size for dramatic reduction of packaging costs - Discusses properties, preparation, and growth of silicon crystals and wafers - Explains the many properties (mechanical, electrostatic, optical, etc), manufacturing, processing, measuring (incl. focused beam techniques), and multiscale modeling methods of MEMS structures
