Download or read book Materials written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2013-10-09 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com. The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design. Design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications Highly visual full color graphics facilitate understanding of materials concepts and properties Chapters on materials selection and design are integrated with chapters on materials fundamentals, enabling students to see how specific fundamentals can be important to the design process For instructors, a solutions manual, lecture slides, online image bank and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com Links with the Cambridge Engineering Selector (CES EduPack), the powerful materials selection software. See www.grantadesign.com for information NEW TO THIS EDITION: Text and figures have been revised and updated throughout The number of worked examples has been increased by 50% The number of standard end-of-chapter exercises in the text has been doubled Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology
Download or read book Manufacturing Process Design and Optimization written by Rhyder and published by CRC Press. This book was released on 1997-04-15 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the concepts of process design, problem identification, problem-solving and process optimization. It provides the basic tools needed to increase the consistency and profitability of manufacturing options, stressing the paradigms of improvement and emphasizing the hands-on use of tools furnished. The book introduces basic experimental design principles and avoids complicated statistical formulae.
Download or read book Materials and Design written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2010 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials are the stuff of design. From the very beginning of human history, materials have been taken from the natural world and shaped, modified, and adapted for everything from primitive tools to modern electronics. This renowned book by noted materials engineering author Mike Ashby and Industrial designer, Kara Johnson, explores the role of materials and materials processing in product design, with a particular emphasis on creating both desired aesthetics and functionality. The new edition will feature even more of the highly useful "materials profiles," that give critical design, processing, performance and applications criteria for each material in question. The reader will find information ranging from the generic and commercial names of each material, its physical and mechanical properties, its chemical properties, its common uses, how it is typically made and processed, and even its average price. And with improved photographs and drawings, the reader will be taken even more closely to the way real design is done by real designers, selecting the optimum materials for a successful product. * The best guide ever published on the on the role of materials, past and present, in product development, by noted materials authority Mike Ashby and professional designer Kara Johnson--now with even better photos and drawings on the Design Process * Significant new section on the use of re-cycled materials in products, and the importance of sustainable design for manufactured goods and services * Enhanced materials profiles, with addition of new materials types like nanomaterials, advanced plastics and bio-based materials
Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student. Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books. This book covers a wider range of materials and processes than is customary in the elementary materials science books. * Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text * Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works * Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology
Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.
Download or read book Materials and Design written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2002-12-10 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bestselling author Ashby guides readers through the process of selecting materials on the basis of their design suitability. Many excellent attribute RmapsS are included, which enable complex comparative information to be readily grasped. Full-color photos and illustrations throughout aid the understanding of concepts.
Download or read book Advanced Materials Processing and Manufacturing written by Yogesh Jaluria and published by Springer. This book was released on 2018-05-24 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on advanced processing of new and emerging materials, and advanced manufacturing systems based on thermal transport and fluid flow. It examines recent areas of considerable growth in new and emerging manufacturing techniques and materials, such as fiber optics, manufacture of electronic components, polymeric and composite materials, alloys, microscale components, and new devices and applications. The book includes analysis, mathematical modeling, numerical simulation and experimental study of processes for prediction, design and optimization. It discusses the link between the characteristics of the final product and the basic transport mechanisms and provides a foundation for the study of a wide range of manufacturing processes. Focuses on new and advanced methods of manufacturing and materials processing with traditional methods described in light of the new approaches; Maximizes reader understanding of the fundamentals of how materials change, what transport processes are involved, and how these can be simulated and optimized - concepts not covered elsewhere; Introduces new materials and applications in manufacturing and summarizes traditional processing methods, such as heat treatment, extrusion, casting, injection molding, and bonding, to show how they have evolved and how they could be used for meeting the challenges that we face today.
Download or read book Materials Enabled Designs written by Michael Pfeifer and published by Butterworth-Heinemann. This book was released on 2009-06-02 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are books aplenty on materials selection criteria for engineering design. Most cover the physical and mechanical properties of specific materials, but few offer much in the way of total product design criteria. This innovative new text/reference will give the “Big picture view of how materials should be selected—not only for a desired function but also for their ultimate performance, durability, maintenance, replacement costs, and so on. Even such factors as how a material behaves when packaged, shipped, and stored will be taken into consideration. For without that knowledge, a design engineer is often in the dark as to how a particular material used in particular product or process is going to behave over time, how costly it will be, and, ultimately, how successful it will be at doing what is supposed to do. This book delivers that knowledge. * Brief but comprehensive review of major materials functional groups (mechanical, electrical, thermal, chemical) by major material categories (metals, polymers, ceramics, composites)* Invaluable guidance on selection criteria at early design stage, including such factors as functionality, durability, and availability* Insight into lifecycle factors that affect choice of materials beyond simple performance specs, including manufacturability, machinability, shelf life, packaging, and even shipping characteristics* Unique help on writing materials selection specifications
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Manufacturing written by Beno Benhabib and published by CRC Press. This book was released on 2003-07-03 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept development to final production, this comprehensive text thoroughly examines the design, prototyping, and fabrication of engineering products and emphasizes modern developments in system modeling, analysis, and automatic control. This reference details various management strategies, design methodologies, traditional production techniqu
Download or read book Assembly Line Design written by We-Min Chow and published by CRC Press. This book was released on 2020-12-18 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to treat line design and its related subjects in a cohesive manner, with an emphasis on design applications. It discusses general guidelines for setting up assumptions and determining line performance parameters, based on empirical data from literature reports.
Download or read book Materials Selection for Design and Manufacturing written by Joseph Datsko and published by CRC Press. This book was released on 2020-09-10 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing an analytical approach to selecting the best metal and obtaining optimal properties for and in a fabricated part, this text correlates weldability, formability and machinability with a metal's chemical composition through microstructures. It begins with a review of the principles of materials science and offers useful features, such as end-of-chapter problems and a solutions manual.
Download or read book Processes and Design for Manufacturing written by Sherif D. El Wakil and published by Brooks/Cole. This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive and in-depth coverage of manufacturing processes from the standpoint of the product designer. Reflecting a growing need in industry and education for design-driven instruction, this book demonstrates the importance of considering the selection of manufacturing method early in the design process, illustrating how the selection of method directly affects the geometric characteristics of products. Beginning with a study of the design process itself in Chapter 1, readers are taken through the product development process, with concurrent engineering presented in Chapter 2 (new to this Second Edition) and cost - as a factor affecting design and manufacturability - covered in a new Chapter 11. Augmenting the book's design orientation are new chapters on design for assemble (Chapter 12) and environmentally conscious design and manufacturing (Chapter 13). The book also includes a wealth of worked-out design examples and design projects (in Chapters 3-11), and an appendix on materials engineering that explains how materials are selected in the design of products. This book provides engineers and product designers with solidly quantitative, design-driven discussion of manufacturing processes that supports a systems approach to manufacturing.
Download or read book Computer Aided Fixture Design written by Yiming (Kevin) Rong and published by CRC Press. This book was released on 1999-04-20 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrates recently developed fixture design and verification technology, focusing on their central role in manufacturing processes. The text uses up-to-date computer technology to minimize costs, increase productivity and assure product quality. It presents advanced data and analysis that is directly applicable to development of comprehensive com
Download or read book Modeling in Materials Processing written by Jonathan A. Dantzig and published by Cambridge University Press. This book was released on 2001-11-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modeling and computer simulation are useful tools for improving materials processing. While courses in materials processing have covered modeling, they have been devoted to one particular class of materials--polymers, metals, or ceramics. This text offers a new approach, presenting an integrated treatment of metallic and non-metallic materials. The authors show that a common base of knowledge--specifically, the fundamentals of heat transfer and fluid mechanics--unifies these seemingly disparate areas. They emphasize understanding basic physical phenomena and knowing how to include them in a model. The book also includes selected numerical methods, a wealth of practical, realistic examples, and homework exercises.
Download or read book Materials Processing Fundamentals written by Lifeng Zhang and published by Springer. This book was released on 2016-12-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection provides researchers and industry professionals with complete guidance on the synthesis, analysis, design, monitoring, and control of metals, materials, and metallurgical processes and phenomena. Along with the fundamentals, it covers modeling of diverse phenomena in processes involving iron, steel, non-ferrous metals, and composites. It also goes on to examine second phase particles in metals, novel sensors for hostile-environment materials processes, online sampling and analysis techniques, and models for real-time process control and quality monitoring systems.
Download or read book Materials for Construction and Civil Engineering written by M. Clara Gonçalves and published by Springer. This book was released on 2015-03-03 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: This expansive volume presents the essential topics related to construction materials composition and their practical application in structures and civil installations. The book's diverse slate of expert authors assemble invaluable case examples and performance data on the most important groups of materials used in construction, highlighting aspects such as nomenclature, the properties, the manufacturing processes, the selection criteria, the products/applications, the life cycle and recyclability, and the normalization. Civil Engineering Materials: Science, Processing, and Design is ideal for practicing architects; civil, construction, and structural engineers, and serves as a comprehensive reference for students of these disciplines. This book also: · Provides a substantial and detailed overview of traditional materials used in structures and civil infrastructure · Discusses properties of natural and synthetic materials in construction and materials' manufacturing processes · Addresses topics important to professionals working with structural materials, such as corrosion, nanomaterials, materials life cycle, not often covered outside of journal literature · Diverse author team presents expect perspective from civil engineering, construction, and architecture · Features a detailed glossary of terms and over 400 illustrations
