Download or read book Materials Kinetics written by John C. Mauro and published by Elsevier. This book was released on 2020-11-22 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Kinetics: Transport and Rate Phenomena provides readers with a clear understanding of how physical-chemical principles are applied to fundamental kinetic processes. The book integrates advanced concepts with foundational knowledge and cutting-edge computational approaches, demonstrating how diffusion, morphological evolution, viscosity, relaxation and other kinetic phenomena can be applied to practical materials design problems across all classes of materials. The book starts with an overview of thermodynamics, discussing equilibrium, entropy, and irreversible processes. Subsequent chapters focus on analytical and numerical solutions of the diffusion equation, covering Fick's laws, multicomponent diffusion, numerical solutions, atomic models, and diffusion in crystals, polymers, glasses, and polycrystalline materials. Dislocation and interfacial motion, kinetics of phase separation, viscosity, and advanced nucleation theories are examined next, followed by detailed analyses of glass transition and relaxation behavior. The book concludes with a series of chapters covering molecular dynamics, energy landscapes, broken ergodicity, chemical reaction kinetics, thermal and electrical conductivities, Monte Carlo simulation techniques, and master equations. - Covers the full breadth of materials kinetics, including organic and inorganic materials, solids and liquids, theory and experiments, macroscopic and microscopic interpretations, and analytical and computational approaches - Demonstrates how diffusion, viscosity microstructural evolution, relaxation, and other kinetic phenomena can be leveraged in the practical design of new materials - Provides a seamless connection between thermodynamics and kinetics - Includes practical exercises that reinforce key concepts at the end of each chapter
Download or read book Kinetics of Materials written by Robert W. Balluffi and published by John Wiley & Sons. This book was released on 2005-12-16 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classroom-tested textbook providing a fundamental understandingof basic kinetic processes in materials This textbook, reflecting the hands-on teaching experience of itsthree authors, evolved from Massachusetts Institute of Technology'sfirst-year graduate curriculum in the Department of MaterialsScience and Engineering. It discusses key topics collectivelyrepresenting the basic kinetic processes that cause changes in thesize, shape, composition, and atomistic structure of materials.Readers gain a deeper understanding of these kinetic processes andof the properties and applications of materials. Topics are introduced in a logical order, enabling students todevelop a solid foundation before advancing to more sophisticatedtopics. Kinetics of Materials begins with diffusion, offering adescription of the elementary manner in which atoms and moleculesmove around in solids and liquids. Next, the more complex motion ofdislocations and interfaces is addressed. Finally, still morecomplex kinetic phenomena, such as morphological evolution andphase transformations, are treated. Throughout the textbook, readers are instilled with an appreciationof the subject's analytic foundations and, in many cases, theapproximations commonly used in the field. The authors offer manyextensive derivations of important results to help illuminate theirorigins. While the principal focus is on kinetic phenomena incrystalline materials, select phenomena in noncrystalline materialsare also discussed. In many cases, the principles involved apply toall materials. Exercises with accompanying solutions are provided throughoutKinetics of Materials, enabling readers to put their newfoundknowledge into practice. In addition, bibliographies are offeredwith each chapter, helping readers to investigate specializedtopics in greater detail. Several appendices presenting importantbackground material are also included. With its unique range of topics, progressive structure, andextensive exercises, this classroom-tested textbook provides anenriching learning experience for first-year graduate students.
Download or read book Kinetics in Materials Science and Engineering written by Dennis W. Readey and published by CRC Press. This book was released on 2017-01-27 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A pedagogical gem.... Professor Readey replaces ‘black-box’ explanations with detailed, insightful derivations. A wealth of practical application examples and exercise problems complement the exhaustive coverage of kinetics for all material classes." –Prof. Rainer Hebert, University of Connecticut "Prof. Readey gives a grand tour of the kinetics of materials suitable for experimentalists and modellers.... In an easy-to-read and entertaining style, this book leads the reader to fundamental, model-based understanding of kinetic processes critical to development, fabrication and application of commercially-important soft (polymers, biomaterials), hard (ceramics, metals) and composite materials. It is a must-have for anyone who really wants to understand how to make materials and how they will behave in service." --Prof. Bill Lee, Imperial College London, Fellow of the Royal Academy of Engineering "A much needed text filing the gap between an introductory course in materials science and advanced materials-specific kinetics courses. Ideal for the undergraduate interested in an in-depth study of kinetics in materials." –Prof. Mark E. Eberhart, Colorado School of Mines This book provides an in-depth introduction to the most important kinetic concepts in materials science, engineering, and processing. All types of materials are addressed, including metals, ceramics, polymers, electronic materials, biomaterials, and composites. The expert author with decades of teaching and practical experience gives a lively and accessible overview, explaining the principles that determine how long it takes to change material properties and make new and better materials. The chapters cover a broad range of topics extending from the heat treatment of steels, the processing of silicon integrated microchips, and the production of cement, to the movement of drugs through the human body. The author explicitly avoids "black box" equations, providing derivations with clear explanations.
Download or read book Materials Kinetics Fundamentals written by Ryan O'Hayre and published by John Wiley & Sons. This book was released on 2015-01-12 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory kinetics for the undergrad materials scientist Materials Kinetics Fundamentals is an accessible and interesting introduction to kinetics processes, with a focus on materials systems. Designed for the undergraduate student, this book avoids intense mathematics to present the theory and application of kinetics in a clear, reader-friendly way. Students are first introduced to the fundamental concepts of kinetics, with illustrated diagrams, examples, text boxes, and homework questions that impart a unified, intuitive understanding. Further chapters cover the application of these concepts in the context of materials science, with real-world examples including silicon processing and integrated circuit fabrication, thin-film deposition, carbon-14 dating, steel degassing, energy conversion, and more. Instructor materials including a test bank are available through the companion website, providing a complete resource for the undergraduate materials science student. At its core, kinetics deals with rates, telling us how fast something will take place – for example, how fast water will evaporate, or how fast molten silicon will solidify. This book is designed to provide students with an introduction to kinetics' underlying principles, without rigorous math to distract from understanding. Understand universally important kinetic concepts like diffusion and reaction rate Model common kinetic processes both quantitatively and qualitatively Learn the mechanisms behind important and interesting materials systems Examine the behaviors, properties, and interactions of relevant solid materials There are a large number of books on chemical kinetics, but there are far fewer that focus on materials kinetics, and virtually none that provide an accessible, introductory-level treatment of the subject. Materials Kinetics Fundamentals fills that need, with clear, detailed explanations of these universal concepts.
Download or read book Lectures on Kinetic Processes in Materials written by Han-Ill Yoo and published by Springer Nature. This book was released on 2020-05-09 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides beginning graduate or senior-level undergraduate students in materials disciplines with a primer of the fundamental and quantitative ideas on kinetic processes in solid materials. Kinetics is concerned with the rate of change of the state of existence of a material system under thermodynamic driving forces. Kinetic processes in materials typically involve chemical reactions and solid state diffusion in parallel or in tandem. Thus, mathematics of diffusion in continuum is first dealt with in some depth, followed by the atomic theory of diffusion and a brief review of chemical reaction kinetics. Chemical diffusion in metals and ionic solids, diffusion-controlled kinetics of phase transformations, and kinetics of gas-solid reactions are examined. Through this course of learning, a student will become able to predict quantitatively how fast a kinetic process takes place, to understand the inner workings of the process, and to design the optimal process of material state change. Provides students with the tools to predict quantitatively how fast a kinetic process takes place and solve other diffusion related problems; Learns fundamental and quantitative ideas on kinetic processes in solid materials; Examines chemical diffusion in metals and ionic solids, diffusion-controlled kinetics of phase transformations, and kinetics of gas-solid reactions, among others; Contains end-of chapter exercise problems to help reinforce students' grasp of the concepts presented within each chapter.
Download or read book Grain Boundary Migration in Metals written by Gunter Gottstein and published by CRC Press. This book was released on 1999-06-17 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The behavior of adjacent materials at the boundary where they meet is an essential aspect of creating new engineering materials. Grain Boundary Migration in Metals is an authoritative account of the physics of grain boundary motion, written by two highly respected researchers. They provide a comprehensive overview of current knowledge regarding the migration process and how it affects microstructure evolution, focusing their treatment exclusively on the properties and behavior of grain boundaries with well defined geometry and crystallography. With their emphasis on applications-such as the characterization of microstructure and texture, recrystallization, and grain growth-the authors effectively fill the gap between the physics of grain boundary motion and its engineering practicality. The need for better microstructural design motivates permanent thrust for research in the field, and continued rapid progress appears inevitable. Grain Boundary Migration in Metals provides a solid foundation in the phenomena and serves as a valuable reference for professionals in materials science, solid state physics, and any industry engaged in metals production and the heat treatment of metals and alloys.
Download or read book Electrode Kinetics for Chemists Chemical Engineers and Materials Scientists written by Eliezer Gileadi and published by Capstone. This book was released on 1993 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a thorough explanation of electrode kinetics, this textbook emphasizes physical phenomena - rather than mathematical formalism - and elucidates the underlying principles of the different experimental techniques. Assuming an elementary knowledge of thermodynamics and chemical kinetics and minimal mathematical skills, coverage explores the arguments of two primary schools of thought: electrode kinetics and interfacial electrochemistry viewed as a branch of physical chemistry and from the perspective of analytical chemistry.
Download or read book An Introduction to Aspects of Thermodynamics and Kinetics Relevant to Materials Science written by Eugene Machlin and published by Elsevier. This book was released on 2010-07-07 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a set of notes developed over many years for an introductory course taught to seniors and entering graduate students in materials science. An Introduction to Aspects of Thermodynamics and Kinetics Relevant to Materials Science is about the application of thermodynamics and kinetics to solve problems within Materials Science. Emphasis is to provide a physical understanding of the phenomenon under discussion, with the mathematics presented as a guide. The problems are used to provide practice in quantitative application of principles, and also to give examples of applications of the general subject matter to problems having current interest and to emphasize the important physical concepts. End of chapter problems are included, as are references, and bibliography to reinforce the text. This book provides students with the theory and mathematics to understand the important physical understanding of phenomena. - Based on a set of notes developed over many years for an introductory course taught to seniors and entering graduate students in materials science - Provides students with the theory and mathematics to understand the important physical understanding of phenomena - Includes end of chapter problems, references, and bibliography to reinforce the text
Download or read book Interfaces in Materials written by James M. Howe and published by Wiley-Interscience. This book was released on 1997-02-27 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough exploration of the atomic structures and properties of the essential engineering interfaces—an invaluable resource for students, teachers, and professionals The most up-to-date, accessible guide to solid-vapor, solid-liquid, and solid-solid phase transformations, this innovative book contains the only unified treatment of these three central engineering interfaces. Employing a simple nearest-neighbor broken-bond model, Interfaces in Materials focuses on metal alloys in a straightforward approach that can be easily extended to all types of interfaces and materials. Enhanced with nearly 300 illustrations, along with extensive references and suggestions for further reading, this book provides: A simple, cohesive approach to understanding the atomic structure and properties of interfaces formed between solid, liquid, and vapor phases Self-contained discussions of each interface—allowing separate study of each phase transformation A comparative look at the different interfaces, including atomic structure and crystallography; anisotropy, roughening, and melting; interfacial stability and segregation; continuous and ledge growth models; and atomistic modeling An analysis of nearest-neighbor broken-bond results against thermodynamic and kinetic descriptions of the interfaces Problem sets at the end of each chapter, emphasizing the key concepts detailed in the text Spanning the fields of chemical, electrical and computer engineering, materials science, solid-state physics, and microscopy, Interfaces in Materials bridges a major gap in the literature of surface and interface science.
Download or read book Problems in Metallurgical Thermodynamics and Kinetics written by G. S. Upadhyaya and published by Elsevier. This book was released on 2013-10-22 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems in Metallurgical Thermodynamics and Kinetics provides an illustration of the calculations encountered in the study of metallurgical thermodynamics and kinetics, focusing on theoretical concepts and practical applications. The chapters of this book provide comprehensive account of the theories, including basic and applied numerical examples with solutions. Unsolved numerical examples drawn from a wide range of metallurgical processes are also provided at the end of each chapter. The topics discussed include the three laws of thermodynamics; Clausius-Clapeyron equation; fugacity, activity, and equilibrium constant; thermodynamics of electrochemical cells; and kinetics. This book is beneficial to undergraduate and postgraduate students in universities, polytechnics, and technical colleges.
Download or read book Kinetics in Nanoscale Materials written by King-Ning Tu and published by John Wiley & Sons. This book was released on 2014-05-16 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the ability to produce nanomaterials advances, it becomes more important to understand how the energy of the atoms in these materials is affected by their reduced dimensions. Written by an acclaimed author team, Kinetics in Nanoscale Materials is the first book to discuss simple but effective models of the systems and processes that have recently been discovered. The text, for researchers and graduate students, combines the novelty of nanoscale processes and systems with the transparency of mathematical models and generality of basic ideas relating to nanoscience and nanotechnology.
Download or read book Thermal Analysis Kinetics for Understanding Materials Behavior written by Sergey Vyazovkin and published by MDPI. This book was released on 2020-12-29 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Changing the temperature of a substance can stimulate dramatic changes of its state. These changes can be intermolecular (physical) and intramolecular (chemical) in nature. Physical changes occur without breaking intramolecular bonds, and lead to transitions between the four major phases: gas, liquid, crystal, and glass. Chemical changes are associated with chemical reactions that originate from breaking intramolecular bonds. Phase transitions as well as chemical reactions occur at finite rates. Measuring the rates of processes is the realm of kinetics. The kinetics of thermally stimulated processes is routinely measured using thermal analysis techniques such as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Knowing the process rates and their dependence on temperature is of vital importance for understanding the behavior of materials exposed to variations in temperature. In recent years, thermal analysis kinetics has made significant progress by developing computational tools for reliable kinetic analysis. It has also expanded its traditional application area to newly developed nano- and biomaterials. This Special Issue is a series of papers that reflect recent developments in the field and highlight the essential role of thermal analysis kinetics in understanding the processes responsible for the thermal behavior of various materials.
Download or read book Extractive Metallurgy 1 written by Alain Vignes and published by John Wiley & Sons. This book was released on 2013-03-28 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the processes of mineral transformation, recycling and reclamation of metals, for the purpose of turning metals and alloys into a liquid state ready for pouring. Even though "process metallurgy" is one of the oldest technologies implemented by man, technological innovation, with the development of processes that are both focused on product quality and economically and ecologically efficient, continues to be at the heart of these industries. This book explains the physico-chemical bases of transformations, vital to their understanding and control (optimization of operational conditions), and the foundations in terms of "process engineering" (heat and matter assessment, process coupling: chemical reactions and transport phenomena), vital to the optimal execution and analysis of transformation process operations. This book is addressed to students in the field of metallurgy and to engineers facing the problem of metal and alloy development (operation of an industrial unit or development of a new process).
Download or read book Drying Kinetics in Building Materials and Components written by João M. P. Q. Delgado and published by Springer Nature. This book was released on 2019-09-24 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents an extensive experimental characterisation of two different ceramic brick blocks with different interface, at different heights, during the drying process. First, a laboratory characterization of the building material used (ceramic bricks and different mortars) is presented, showing their hygrothermal, mechanical and thermal properties, namely, bulk porosity and density, water vapour permeability, capillary absorption, retention curve, moisture diffusivity as a function of moisture content and thermal conductivity. Moreover, the moisture transfer in multi-layered systems was analysed in detail taking into account the interface contact between the building elements.
Download or read book Advances in Crystallization Processes written by Yitzhak Mastai and published by BoD – Books on Demand. This book was released on 2012-04-27 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystallization is used at some stage in nearly all process industries as a method of production, purification or recovery of solid materials. In recent years, a number of new applications have also come to rely on crystallization processes such as the crystallization of nano and amorphous materials. The articles for this book have been contributed by the most respected researchers in this area and cover the frontier areas of research and developments in crystallization processes. Divided into five parts this book provides the latest research developments in many aspects of crystallization including: chiral crystallization, crystallization of nanomaterials and the crystallization of amorphous and glassy materials. This book is of interest to both fundamental research and also to practicing scientists and will prove invaluable to all chemical engineers and industrial chemists in the process industries as well as crystallization workers and students in industry and academia.
Download or read book Chemical Kinetics written by Luis Arnaut and published by Elsevier. This book was released on 2006-12-21 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Kinetics bridges the gap between beginner and specialist with a path that leads the reader from the phenomenological approach to the rates of chemical reactions to the state-of-the-art calculation of the rate constants of the most prevalent reactions: atom transfers, catalysis, proton transfers, substitution reactions, energy transfers and electron transfers. For the beginner provides the basics: the simplest concepts, the fundamental experiments, and the underlying theories. For the specialist shows where sophisticated experimental and theoretical methods combine to offer a panorama of time-dependent molecular phenomena connected by a new rational. Chemical Kinetics goes far beyond the qualitative description: with the guidance of theory, the path becomes a reaction path that can actually be inspected and calculated. But Chemical Kinetics is more about structure and reactivity than numbers and calculations. A great emphasis in the clarity of the concepts is achieved by illustrating all the theories and mechanisms with recent examples, some of them described with sufficient detail and simplicity to be used in general chemistry and lab courses.* Looking at atoms and molecules, and how molecular structures change with time. * Providing practical examples and detailed theoretical calculations* Of special interest to Industrial Chemistry and Biochemistry
Download or read book An Introduction to Chemical Kinetics written by Michel Soustelle and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a progressive presentation of kinetics of the chemical reactions. It provides complete coverage of the domain of chemical kinetics, which is necessary for the various future users in the fields of Chemistry, Physical Chemistry, Materials Science, Chemical Engineering, Macromolecular Chemistry and Combustion. It will help them to understand the most sophisticated knowledge of their future job area. Over 15 chapters, this book present the fundamentals of chemical kinetics, its relations with reaction mechanisms and kinetic properties. Two chapters are then devoted to experimental results and how to calculate the kinetic laws in both homogeneous and heterogeneous systems. The following two chapters describe the main approximation modes to calculate these laws. Three chapters are devoted to elementary steps with the various classes, the principles used to write them and their modeling using the theory of the activated complex in gas and condensed phases. Three chapters are devoted to the particular areas of chemical reactions, chain reactions, catalysis and the stoichiometric heterogeneous reactions. Finally the non-steady-state processes of combustion and explosion are treated in the final chapter.