Download or read book Materials and Process Selection for Engineering Design written by Mahmoud M. Farag and published by CRC Press. This book was released on 2020-12-30 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing a new engineering product or changing an existing model involves developing designs, reaching economic decisions, selecting materials, choosing manufacturing processes, and assessing environmental impact. These activities are interdependent and should not be performed in isolation from each other. This is because the materials and processes used in making a product can have a major influence on its design, cost, and performance in service. This Fourth Edition of the best-selling Materials and Process Selection for Engineering Design takes all of this into account and has been comprehensively revised to reflect the many advances in the fields of materials and manufacturing, including: Increasing use of additive manufacturing technology, especially in biomedical, aerospace and automotive applications Emphasizing the environmental impact of engineering products, recycling, and increasing use of biodegradable polymers and composites Analyzing further into weight reduction of products through design changes as well as material and process selection, especially in manufacturing products such as electric cars Discussing new methods for solving multi-criteria decision-making problems, including multi-component material selection as well as concurrent and geometry-dependent selection of materials and joining technology Increasing use of MATLAB by engineering students in solving problems This textbook features the following pedagogical tools: New and updated practical case studies from industry A variety of suggested topics and background information for in-class group work Ideas and background information for reflection papers so readers can think critically about the material they have read, give their interpretation of the issues under discussion and the lessons learned, and then propose a way forward Open-book exercises and questions at the end of each chapter where readers are evaluated on how they use the material, rather than how well they recall it, in addition to the traditional review questions Includes a solutions manual and PowerPoint lecture materials for adopting professors Aimed at students in mechanical, manufacturing, and materials engineering, as well as professionals in these fields, this book provides the practical know-how in order to choose the right materials and processes for development of new or enhanced products.
Download or read book Materials Selection in Mechanical Design written by M. F. Ashby and published by Pergamon. This book was released on 1992-01-01 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: New materials enable advances in engineering design. This book describes a procedure for material selection in mechanical design, allowing the most suitable materials for a given application to be identified from the full range of materials and section shapes available. A novel approach is adopted not found elsewhere. Materials are introduced through their properties; materials selection charts (a new development) capture the important features of all materials, allowing rapid retrieval of information and application of selection techniques. Merit indices, combined with charts, allow optimisation of the materials selection process. Sources of material property data are reviewed and approaches to their use are given. Material processing and its influence on the design are discussed. The book closes with chapters on aesthetics and industrial design. Case studies are developed as a method of illustrating the procedure and as a way of developing the ideas further.
Download or read book Materials and Design written by Michael F. Ashby and published by Elsevier. This book was released on 2009-10-28 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Design: The Art and Science of Material Selection in Product Design, Second Edition, discusses the role of materials and processes in product design. The book focuses on the materials that designers need, as well as on how and why they use them. The book's 10 chapters cover topics such as function and personality, factors influencing product design, the design process, materials selection, and case studies in materials and design. Appendices for each chapter provide exercises for readers, along with detailed charts of technical attributes of different materials for reference. This book will be particularly useful to both students and working designers. Students are introduced to the role of materials in manufacturing and design, with the help of familiar language and concepts. Working designers can use the book as a reference source for materials and manufacturing. - The best guide ever published on the on the role of materials, past and present, in product development, by noted materials authority Mike Ashby and professional designer Kara Johnson--now with even better photos and drawings on the Design Process - Significant new section on the use of re-cycled materials in products, and the importance of sustainable design for manufactured goods and services - Enhanced materials profiles, with addition of new materials types like nanomaterials, advanced plastics and bio-based materials
Download or read book Materials and Process Selection for Engineering Design Third Edition written by Mahmoud M. Farag and published by CRC Press. This book was released on 2013-11-19 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing a new engineering product or changing an existing model involves making designs, reaching economic decisions, selecting materials, choosing manufacturing processes, and assessing its environmental impact. These activities are interdependent and should not be performed in isolation from each other. This is because the materials and processes used in making the product can have a large influence on its design, cost, and performance in service. Since the publication of the second edition of this book, changes have occurred in the fields of materials and manufacturing. Industries now place more emphasis on manufacturing products and goods locally, rather than outsourcing. Nanostructured and smart materials appear more frequently in products, composites are used in designing essential parts of civilian airliners, and biodegradable materials are increasingly used instead of traditional plastics. More emphasis is now placed on how products affect the environment, and society is willing to accept more expensive but eco-friendly goods. In addition, there has been a change in the emphasis and the way the subjects of materials and manufacturing are taught within a variety of curricula and courses in higher education. This third edition of the bestselling Materials and Process Selection for Engineering Design has been comprehensively revised and reorganized to reflect these changes. In addition, the presentation has been enhanced and the book includes more real-world case studies.
Download or read book The Principles of Materials Selection for Engineering Design written by P. L. Mangonon and published by . This book was released on 1999 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing readers to the methodology of engineering design, the book shows how materials selection comes into play during the design of a component or a structure, and examines such engineering requirements as stress, mode of loading, corrosion, and performance efficiencies of materials. Readers are acquainted with the factors of costs and statuatory requirements, including environmental regulations and recycling, and case studies are integrated throughout to illustrate the selection process.
Download or read book Multi criteria Decision Analysis for Supporting the Selection of Engineering Materials in Product Design written by Ali Jahan and published by Butterworth-Heinemann. This book was released on 2016-02-17 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-criteria Decision Analysis for Supporting the Selection of Engineering Materials in Product Design, Second Edition, provides readers with tactics they can use to optimally select materials to satisfy complex design problems when they are faced with the vast range of materials available. Current approaches to materials selection range from the use of intuition and experience, to more formalized computer-based methods, such as electronic databases with search engines to facilitate the materials selection process. Recently, multi-criteria decision-making (MCDM) methods have been applied to materials selection, demonstrating significant capability for tackling complex design problems. This book describes the rapidly growing field of MCDM and its application to materials selection. It aids readers in producing successful designs by improving the decision-making process. This new edition updates and expands previous key topics, including new chapters on materials selection in the context of design problem-solving and multiple objective decision-making, also presenting a significant amount of additional case studies that will aid in the learning process. - Describes the advantages of Quality Function Deployment (QFD) in the materials selection process through different case studies - Presents a methodology for multi-objective material design optimization that employs Design of Experiments coupled with Finite Element Analysis - Supplements existing quantitative methods of materials selection by allowing simultaneous consideration of design attributes, component configurations, and types of material - Provides a case study for simultaneous materials selection and geometrical optimization processes
Download or read book Materials Enabled Designs written by Michael Pfeifer and published by Butterworth-Heinemann. This book was released on 2009-06-02 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are books aplenty on materials selection criteria for engineering design. Most cover the physical and mechanical properties of specific materials, but few offer much in the way of total product design criteria. This innovative new text/reference will give the "Big picture view of how materials should be selected—not only for a desired function but also for their ultimate performance, durability, maintenance, replacement costs, and so on. Even such factors as how a material behaves when packaged, shipped, and stored will be taken into consideration. For without that knowledge, a design engineer is often in the dark as to how a particular material used in particular product or process is going to behave over time, how costly it will be, and, ultimately, how successful it will be at doing what is supposed to do. This book delivers that knowledge.* Brief but comprehensive review of major materials functional groups (mechanical, electrical, thermal, chemical) by major material categories (metals, polymers, ceramics, composites)* Invaluable guidance on selection criteria at early design stage, including such factors as functionality, durability, and availability* Insight into lifecycle factors that affect choice of materials beyond simple performance specs, including manufacturability, machinability, shelf life, packaging, and even shipping characteristics* Unique help on writing materials selection specifications
Download or read book Materials and Process Selection for Engineering Design written by Mahmoud M. Farag and published by CRC Press. This book was released on 2020-12-30 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing a new engineering product or changing an existing model involves developing designs, reaching economic decisions, selecting materials, choosing manufacturing processes, and assessing environmental impact. These activities are interdependent and should not be performed in isolation from each other. This is because the materials and processes used in making a product can have a major influence on its design, cost, and performance in service. This Fourth Edition of the best-selling Materials and Process Selection for Engineering Design takes all of this into account and has been comprehensively revised to reflect the many advances in the fields of materials and manufacturing, including: Increasing use of additive manufacturing technology, especially in biomedical, aerospace and automotive applications Emphasizing the environmental impact of engineering products, recycling, and increasing use of biodegradable polymers and composites Analyzing further into weight reduction of products through design changes as well as material and process selection, especially in manufacturing products such as electric cars Discussing new methods for solving multi-criteria decision-making problems, including multi-component material selection as well as concurrent and geometry-dependent selection of materials and joining technology Increasing use of MATLAB by engineering students in solving problems This textbook features the following pedagogical tools: New and updated practical case studies from industry A variety of suggested topics and background information for in-class group work Ideas and background information for reflection papers so readers can think critically about the material they have read, give their interpretation of the issues under discussion and the lessons learned, and then propose a way forward Open-book exercises and questions at the end of each chapter where readers are evaluated on how they use the material, rather than how well they recall it, in addition to the traditional review questions Includes a solutions manual and PowerPoint lecture materials for adopting professors Aimed at students in mechanical, manufacturing, and materials engineering, as well as professionals in these fields, this book provides the practical know-how in order to choose the right materials and processes for development of new or enhanced products.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Materials written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2013-10-09 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com. The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design. - Design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications - Highly visual full color graphics facilitate understanding of materials concepts and properties - Chapters on materials selection and design are integrated with chapters on materials fundamentals, enabling students to see how specific fundamentals can be important to the design process - For instructors, a solutions manual, lecture slides, online image bank and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com - Links with the Cambridge Engineering Selector (CES EduPack), the powerful materials selection software. See www.grantadesign.com for information NEW TO THIS EDITION: - Text and figures have been revised and updated throughout - The number of worked examples has been increased by 50% - The number of standard end-of-chapter exercises in the text has been doubled - Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology
Download or read book Modern Ceramic Engineering written by David W. Richerson and published by . This book was released on 1982 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.
Download or read book Computer Aided Materials Selection During Structural Design written by National Research Council and published by National Academies Press. This book was released on 1995-04-03 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection of the proper materials for a structural component is a critical activity that is governed by many, often conflicting factors. Incorporating materials expert systems into CAD/CAM operations could assist designers by suggesting potential manufacturing processes for particular products to facilitate concurrent engineering, recommending various materials for a specific part based on a given set of characteristics, or proposing possible modifications of a design if suitable materials for a particular part do not exist. This book reviews the structural design process, determines the elements, and capabilities required for a materials selection expert system to assist design engineers, and recommends the areas of expert system and materials modeling research and development required to devise a materials-specific design system.
Download or read book Standards for Engineering Design and Manufacturing written by Wasim Ahmed Khan and published by CRC Press. This book was released on 2005-12-15 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on standardization describe the impact of ISO and related organizations on many industries. While this is great for managing an organization, it leaves engineers asking questions such aswhat are the effects of standards on my designs? andhow can I use standardization to benefit my work? Standards for Engineering Design and Manuf
Download or read book Materials Selection in Mechanical Design written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2016-09-23 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Selection in Mechanical Design, Fifth Edition, winner of a 2018 Textbook Excellence Award (Texty), describes the procedures for material selection in mechanical design in order to ensure that the most suitable materials for a given application are identified from the full range of materials and section shapes available. Extensively revised for this fifth edition, the book is recognized as one of the leading materials selection texts, providing a unique and innovative resource for students, engineers, and product/industrial designers. - Winner of a 2018 Textbook Excellence Award (Texty) from the Textbook and Academic Authors Association - Includes significant revisions to chapters on advanced materials selection methods and process selection, with coverage of newer processing developments such as additive manufacturing - Contains a broad scope of new material classes covered in the text with expanded data tables that include "functional materials such as piezoelectric, magnetostrictive, magneto-caloric, and thermo-electric materials - Presents improved pedagogy, such as new worked examples throughout the text and additional end-of-chapter exercises (moved from an appendix to the relevant chapters) to aid in student learning and to keep the book fresh for instructors through multiple semesters - "Forces for Change chapter has been re-written to outline the links between materials and sustainable design
Download or read book Process Techniques for Engineering High Performance Materials written by Tim Oberle and published by CRC Press. This book was released on 2013-06-19 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most processed materials retain a memory of their production process at the molecular level. Subtle changes in production-such as variations in temperature or the presence of impurities-can impart performance benefits or drawbacks to individual batches of products. Some product developers have taken advantage of this process dependency to tailor pr
Download or read book Processes and Design for Manufacturing written by Sherif D. El Wakil and published by Brooks/Cole. This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive and in-depth coverage of manufacturing processes from the standpoint of the product designer. Reflecting a growing need in industry and education for design-driven instruction, this book demonstrates the importance of considering the selection of manufacturing method early in the design process, illustrating how the selection of method directly affects the geometric characteristics of products. Beginning with a study of the design process itself in Chapter 1, readers are taken through the product development process, with concurrent engineering presented in Chapter 2 (new to this Second Edition) and cost - as a factor affecting design and manufacturability - covered in a new Chapter 11. Augmenting the book's design orientation are new chapters on design for assemble (Chapter 12) and environmentally conscious design and manufacturing (Chapter 13). The book also includes a wealth of worked-out design examples and design projects (in Chapters 3-11), and an appendix on materials engineering that explains how materials are selected in the design of products. This book provides engineers and product designers with solidly quantitative, design-driven discussion of manufacturing processes that supports a systems approach to manufacturing.
