Download or read book Materials and Processes of Electron Devices written by Max Knoll and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This bookis intended to be of assistance to the physicist or engineer concerned with designing and building electron devices such as high-vacuum transmitter- or amplifier tubes, gas- or vapor-filled rectifiers, thyratrons, X-ray or luminescent tubes, glow or incandescent lamps, Geiger- or ionization counters, vacuum photo cells, photoconductive cells, selenium-, germanium- or silicon rectifiers or trans istors. For this purpose, extensive information is required concerning the compo sition, behavior and handling of materials as well as a thorough knowledge of high-vacuum technique necessary for processing electron devices after their assembly. The text covers the preparation and working of materials used in these devices; the finishing methods for vacuum tubes (especially degassing, pumping and getter procedures); and different production steps of solid state devices. This book contains about 2300 references indicated in the text by the author's name and reference number. At the end of each chapter the references themselves are listed alphabetically by the author's name and with the title sometimes abbreviated. In accordance with the purpose of the book, "first" publications are quoted only when they contain up-to-date-knowledge of the subject in question. Patents are treated as references. The quotation of a patent gives only a hint of the technical details described there. Mentioning, or not mentioning, a patent does not imply a statement concerning its importance or validity or warning against imitation. Expired patents are named in addition to ones still valid.
Download or read book Materials and Electron Device Processing written by and published by ASTM International. This book was released on 1961 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability and Failure of Electronic Materials and Devices written by Milton Ohring and published by Academic Press. This book was released on 2014-10-14 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and Failure of Electronic Materials and Devices is a well-established and well-regarded reference work offering unique, single-source coverage of most major topics related to the performance and failure of materials used in electronic devices and electronics packaging. With a focus on statistically predicting failure and product yields, this book can help the design engineer, manufacturing engineer, and quality control engineer all better understand the common mechanisms that lead to electronics materials failures, including dielectric breakdown, hot-electron effects, and radiation damage. This new edition adds cutting-edge knowledge gained both in research labs and on the manufacturing floor, with new sections on plastics and other new packaging materials, new testing procedures, and new coverage of MEMS devices. Covers all major types of electronics materials degradation and their causes, including dielectric breakdown, hot-electron effects, electrostatic discharge, corrosion, and failure of contacts and solder joints New updated sections on "failure physics," on mass transport-induced failure in copper and low-k dielectrics, and on reliability of lead-free/reduced-lead solder connections New chapter on testing procedures, sample handling and sample selection, and experimental design Coverage of new packaging materials, including plastics and composites
Download or read book Electrical and Electronic Devices Circuits and Materials written by Suman Lata Tripathi and published by CRC Press. This book was released on 2021-03-15 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand in home and industry for electronic devices has encouraged designers and researchers to investigate new devices and circuits using new materials that can perform several tasks efficiently with low IC (integrated circuit) area and low power consumption. Furthermore, the increasing demand for portable devices intensifies the search to design sensor elements, an efficient storage cell, and large-capacity memory elements. Electrical and Electronic Devices, Circuits and Materials: Design and Applications will assist the development of basic concepts and fundamentals behind devices, circuits, materials, and systems. This book will allow its readers to develop their understanding of new materials to improve device performance with even smaller dimensions and lower costs. Additionally, this book covers major challenges in MEMS (micro-electromechanical system)-based device and thin-film fabrication and characterization, including their applications in different fields such as sensors, actuators, and biomedical engineering. Key Features: Assists researchers working on devices and circuits to correlate their work with other requirements of advanced electronic systems. Offers guidance for application-oriented electrical and electronic device and circuit design for future energy-efficient systems. Encourages awareness of the international standards for electrical and electronic device and circuit design. Organized into 23 chapters, Electrical and Electronic Devices, Circuits and Materials: Design and Applications will create a foundation to generate new electrical and electronic devices and their applications. It will be of vital significance for students and researchers seeking to establish the key parameters for future work.
Download or read book Methods of Measurement for Semiconductor Materials Process Control and Devices written by W. Murray Bullis and published by . This book was released on 1973 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoliquid Processes for Electronic Devices written by Tatsuya Shimoda and published by Springer. This book was released on 2019-02-05 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the results of the research on how to make small electronic devices with high properties by using simple liquid processes such as coating, self-assembling and printing, especially focusing on devices composed of silicon and oxide materials. It describes syntheses and analyses of solution materials, formations of solid thin films from solutions, newly developed patterning methods to make devices, and characterization of the developed devices. In the first part of the book, the research on liquid silicon (Si) materials is described. Because the use of a liquid material is a quite new idea for Si devices, this book is the first one to describe liquid Si materials for electronic devices. Si devices as typified by MOS-FET have been produced by using solid and gas materials. This volume precisely describes a series of processes from material synthesis to device fabrication for those who are interested and are/will be engaged in liquid Si-related work. In the latter part of the book, a general method of how to make good oxide films from solutions and a new imprinting method to make nanosized patterns are introduced. For making oxide films with high quality, the designing of the solution is crucial. If a solution is designed properly, a gel material called "cluster gel" can be formed which is able to be imprinted to form nanosized patterns. The anticipated readers of this book are researchers, engineers, and students who are interested in solution and printing processes for making devices. More generally, this book will also provide guidelines for corporate managers and executives who are responsible for making strategies for future manufacturing processes.
Download or read book Methods of Measurement for Semiconductor Materials Process Control and Devices written by United States. National Bureau of Standards and published by . This book was released on 1973 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials and Reliability Handbook for Semiconductor Optical and Electron Devices written by Osamu Ueda and published by Springer Science & Business Media. This book was released on 2012-09-22 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Reliability Handbook for Semiconductor Optical and Electron Devices provides comprehensive coverage of reliability procedures and approaches for electron and photonic devices. These include lasers and high speed electronics used in cell phones, satellites, data transmission systems and displays. Lifetime predictions for compound semiconductor devices are notoriously inaccurate due to the absence of standard protocols. Manufacturers have relied on extrapolation back to room temperature of accelerated testing at elevated temperature. This technique fails for scaled, high current density devices. Device failure is driven by electric field or current mechanisms or low activation energy processes that are masked by other mechanisms at high temperature. The Handbook addresses reliability engineering for III-V devices, including materials and electrical characterization, reliability testing, and electronic characterization. These are used to develop new simulation technologies for device operation and reliability, which allow accurate prediction of reliability as well as the design specifically for improved reliability. The Handbook emphasizes physical mechanisms rather than an electrical definition of reliability. Accelerated aging is useful only if the failure mechanism is known. The Handbook also focuses on voltage and current acceleration stress mechanisms.
Download or read book SiGe materials Processing and Devices written by David Louis Harame and published by The Electrochemical Society. This book was released on 2004 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesives Technology for Electronic Applications written by James J. Licari and published by William Andrew. This book was released on 2011-06-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.512 pagesApprox.512 pages
Download or read book NBS Technical Note written by and published by . This book was released on 1973-03 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Materials and Multilayer Electronic Devices written by K. M. Nair and published by John Wiley & Sons. This book was released on 2012-04-11 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of 40 papers from two symposia: Advanced Dielectric Materials and Multilayer Electronic Devices and High Strain Piezoelectric Materials, Devices and Applications. Topics include fundamental and historical perspectives of dielectric materials; relaxor materials and devices; high strain piezoelectric devices; advanced aspects of powder preparation, characterization, and properties; thin films; materials for low and high frequency applications; processing-structure-property-relationships; and future applications. Proceedings of the symposium held at the 105th Annual Meeting of The American Ceramic Society, April 27-30, 2003, in Nashville, Tennessee; Ceramic Transactions, Volume 150.
Download or read book Handbook of Organic Materials for Optical and Opto Electronic Devices written by Oksana Ostroverkhova and published by Elsevier. This book was released on 2013-08-31 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small molecules and conjugated polymers, the two main types of organic materials used for optoelectronic and photonic devices, can be used in a number of applications including organic light-emitting diodes, photovoltaic devices, photorefractive devices and waveguides. Organic materials are attractive due to their low cost, the possibility of their deposition from solution onto large-area substrates, and the ability to tailor their properties. The Handbook of organic materials for optical and (opto)electronic devices provides an overview of the properties of organic optoelectronic and nonlinear optical materials, and explains how these materials can be used across a range of applications.Parts one and two explore the materials used for organic optoelectronics and nonlinear optics, their properties, and methods of their characterization illustrated by physical studies. Part three moves on to discuss the applications of optoelectronic and nonlinear optical organic materials in devices and includes chapters on organic solar cells, electronic memory devices, and electronic chemical sensors, electro-optic devices.The Handbook of organic materials for optical and (opto)electronic devices is a technical resource for physicists, chemists, electrical engineers and materials scientists involved in research and development of organic semiconductor and nonlinear optical materials and devices. - Comprehensively examines the properties of organic optoelectronic and nonlinear optical materials - Discusses their applications in different devices including solar cells, LEDs and electronic memory devices - An essential technical resource for physicists, chemists, electrical engineers and materials scientists
Download or read book III Nitride Electronic Devices written by and published by Academic Press. This book was released on 2019-10-18 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-Nitride Electronic Devices, Volume 102, emphasizes two major technical areas advanced by this technology: radio frequency (RF) and power electronics applications. The range of topics covered by this book provides a basic understanding of materials, devices, circuits and applications while showing the future directions of this technology. Specific chapters cover Electronic properties of III-nitride materials and basics of III-nitride HEMT, Epitaxial growth of III-nitride electronic devices, III-nitride microwave power transistors, III-nitride millimeter wave transistors, III-nitride lateral transistor power switch, III-nitride vertical devices, Physics-Based Modeling, Thermal management in III-nitride HEMT, RF/Microwave applications of III-nitride transistor/wireless power transfer, and more. - Presents a complete review of III-Nitride electronic devices, from fundamental physics, to applications in two key technical areas – RF and power electronics - Outlines fundamentals, reviews state-of-the-art circuits and applications, and introduces current and emerging technologies - Written by a panel of academic and industry experts in each field
Download or read book Electronic Devices and Circuit Fundamentals written by Dale R. Patrick and published by CRC Press. This book was released on 2023-05-08 with total page 1079 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores many fundamental topics in a basic and easy-to-understand manner. It, and the accompanying DC-AC Electrical Fundamentals by the same co-authors, have been developed using a classic textbook – Electricity and Electronics: A Survey (5th Edition) by Patrick and Fardo – as a framework. Both new books have been structured using the same basic sequence and organization of the textbook as previous editions. This book has been expanded to 23 chapters, further simplifying content and providing a more comprehensive coverage of fundamental content. The content has been continually updated and revised through new editions and by external reviewers throughout the years. Additional quality checks to ensure technical accuracy, clarity and coverage of content have always been an area of focus. Each edition of the text has been improved through the following features: Improved and updated text content. Improved usage of illustrations and photos. Use of color to add emphasis and clarify content.
Download or read book Solution Processable Components for Organic Electronic Devices written by Beata Luszczynska and published by John Wiley & Sons. This book was released on 2019-06-07 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides first-hand insights into advanced fabrication techniques for solution processable organic electronics materials and devices The field of printable organic electronics has emerged as a technology which plays a major role in materials science research and development. Printable organic electronics soon compete with, and for specific applications can even outpace, conventional semiconductor devices in terms of performance, cost, and versatility. Printing techniques allow for large-scale fabrication of organic electronic components and functional devices for use as wearable electronics, health-care sensors, Internet of Things, monitoring of environment pollution and many others, yet-to-be-conceived applications. The first part of Solution-Processable Components for Organic Electronic Devices covers the synthesis of: soluble conjugated polymers; solution-processable nanoparticles of inorganic semiconductors; high-k nanoparticles by means of controlled radical polymerization; advanced blending techniques yielding novel materials with extraordinary properties. The book also discusses photogeneration of charge carriers in nanostructured bulk heterojunctions and charge carrier transport in multicomponent materials such as composites and nanocomposites as well as photovoltaic devices modelling. The second part of the book is devoted to organic electronic devices, such as field effect transistors, light emitting diodes, photovoltaics, photodiodes and electronic memory devices which can be produced by solution-based methods, including printing and roll-to-roll manufacturing. The book provides in-depth knowledge for experienced researchers and for those entering the field. It comprises 12 chapters focused on: ? novel organic electronics components synthesis and solution-based processing techniques ? advanced analysis of mechanisms governing charge carrier generation and transport in organic semiconductors and devices ? fabrication techniques and characterization methods of organic electronic devices Providing coverage of the state of the art of organic electronics, Solution-Processable Components for Organic Electronic Devices is an excellent book for materials scientists, applied physicists, engineering scientists, and those working in the electronics industry.
Download or read book Directory of Federal Laboratory and Technology Resources written by and published by DIANE Publishing. This book was released on 1994 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the individual capabilities of each of 1,900 unique resources in the federal laboratory system, and provides the name and phone number of each contact. Includes government laboratories, research centers, testing facilities, and special technology information centers. Also includes a list of all federal laboratory technology transfer offices. Organized into 72 subject areas. Detailed indices.
