Download or read book Materials and Manufacturing Technologies XIV written by Faruk Yigit and published by Trans Tech Publications Ltd. This book was released on 2012-01-24 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This special issue of Advanced Materials Research contains a selection of high-quality research papers presented at the 14th International Conference on Advances in Materials and Processing Technologies (AMPT) held in Istanbul, Turkey, on July 13-16th, 2011. The papers are related mainly to materials and processing technologies, and the aim of the book is to provide a basis for the identification of new research and development needs in the fields of advanced engineering materials and manufacturing technologies.

Download or read book Advances in Materials Manufacturing Science and Technology XIV written by Tian Huang and published by Trans Tech Publications Ltd. This book was released on 2011-09-21 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 14th International Manufacturing Conference in China (IMCC 2011), October 13-15, 2011, Tianjin, China

Download or read book Processing and Fabrication of Advanced Materials XIV written by T. S. Srivatsan and published by T M S Publications. This book was released on 2005 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 3rd International Conference on Materials and Manufacturing Technologies MATEHN 02 written by International Conference on Materials and Manufacturing Technologies and published by . This book was released on 2002 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modelling Simulation and Data Analysis in Acoustical Problems written by Claudio Guarnaccia and published by MDPI. This book was released on 2020-06-23 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and simulation in acoustics is currently gaining importance. In fact, with the development and improvement of innovative computational techniques and with the growing need for predictive models, an impressive boost has been observed in several research and application areas, such as noise control, indoor acoustics, and industrial applications. This led us to the proposal of a special issue about “Modelling, Simulation and Data Analysis in Acoustical Problems”, as we believe in the importance of these topics in modern acoustics’ studies. In total, 81 papers were submitted and 33 of them were published, with an acceptance rate of 37.5%. According to the number of papers submitted, it can be affirmed that this is a trending topic in the scientific and academic community and this special issue will try to provide a future reference for the research that will be developed in coming years.

Download or read book Recent Advances in Materials and Manufacturing Technologies written by P. Nageswara Rao and published by Trans Tech Publications Ltd. This book was released on 2019-08-30 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Recent Advances in Materials and Manufacturing Technologies (ICRAMMT 2018) Selected, peer reviewed papers from the 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (ICRAMMT-2018), November 19-20, 2018, Hyderabad, India

Download or read book Materials and Manufacturing Technology written by Syed Masood and published by Trans Tech Publications Ltd. This book was released on 2019-08-09 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2018 Asia Conference on Material and Manufacturing Technology (ACMMT 2018), was held in Beijing, China, September 14-16, 2018. The presented collection by results of ACMMT 2018 informs readers about the last achievements in the sphere of materials science and processes of metalworking. We hope you will find this collection informative and useful in your professional activity.

Download or read book Research in Materials and Manufacturing Technologies IV written by and published by . This book was released on 2014 with total page 1350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 4th International Conference on Materials and Products Manufacturing Technology (ICMPMT 2014), September 18-19, 2014, Chongqing, China. The 248 papers are grouped as follows: Chapter 1: Metals and Alloys; Chapter 2: Composite Materials and Applications;Chapter 3: Chemical Materials, Bio-Materials and Energy Materials; Chapter 4: Building Materials and Construction Technology; Chapter 5: Material Processing Technology;Chapter 6: Materials Testing and Analysis, Materials Wear Resistance and Strength; Chapter 7: Advanced Design and Advanced Manufacturing Technology; Chapter 8: Dynamics; Chapter 9: Vibration, Sound, Noise Analysis and Control; Chapter 10: CAD / CAM / CAE and Applications; Chapter 11: Mechatronics, Industrial Robots, Automation and Control; Chapter 12: Measurement Technology, Instruments and Sensors, Monitoring, Detection Technologies and Methodologies; Chapter 13: Power, Electronics, Circuit Technology; Chapter 14: Computer Applications and Mathematical Modeling, Numerical Methods, Intelligent Algorithms and Optimization; Chapter 15: Communication Technologies, Image, Video, Data Processing; Chapter 16: Industrial Engineering, Manufacturing Management, Production Quality Keyword: Metals and Alloys; Composite Materials and Applications; Chemical Materials, Bio-Materials, and Energy Materials; Building Materials and Construction Technology; Material Processing, Testing and Monitoring Technology; Advanced Design and Advanced Manufacturing Technology; Mechanical Dynamics, Structural Strength, Reliability and Risk Analysis and Assessment; Vibration, Sound, Noise Analysis and Control; CAD / CAM / CAE; Mechatronics, ect This 2 volume set draws together 238 papers from the 4th International Conference on Materials and Products Manufacturing Technology (ICMPMT 2014), held in September 2014 in Chongqing, China. Engineers and others from Asia, Europe, Australia, Brazil, and Sudan discuss metals and alloys; composite materials and applications; chemical materials, bio-materials, and energy materials; building materials and construction technology; material processing technology; materials testing and analysis, wear resistance, and strength; advanced design and manufacturing technology; dynamics; vibration, sound, noise analysis, and control; computer-aided design, manufacturing, and engineering and applications; mechatronics, industrial robots, automation, and control technologies; measurement technology, instruments and sensors, monitoring, detection technologies, and methodologies; power, electronics, and circuit technology; computer applications and mathematical modeling, numerical methods, intelligent algorithms, and optimization; communication technologies and image, video, and data processing technologies; and industrial engineering, manufacturing management, and production quality. -- Composite materials-- Construction-- Materials science.

Download or read book Biodegradable Green Composites written by Susheel Kalia and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively addresses surface modification of natural fibers to make them more effective, cost-efficient, and environmentally friendly. Topics include the elucidation of important aspects surrounding chemical and green approaches for the surface modification of natural fibers, the use of recycled waste, properties of biodegradable polyesters, methods such as electrospinning, and applications of hybrid composite materials.

Download or read book Manufacturing Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2023-08-17 with total page 1469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition textbook provides comprehensive knowledge and insight into various aspects of manufacturing technology, processes, materials, tooling, and equipment. Its main objective is to introduce the grand spectrum of manufacturing technology to individuals who will be involved in the design and manufacturing of finished products and to provide them with basic information on manufacturing technologies. Manufacturing Technology: Materials, Processes, and Equipment, Second Edition, is written in a descriptive manner, where the emphasis is on the fundamentals of the process, its capabilities, typical applications, advantages, and limitations. Mathematical modeling and equations are used only when they enhance the basic understanding of the material dealt with. The book is a fundamental textbook that covers all the manufacturing processes, materials, and equipment used to convert the raw materials to a final product. It presents the materials used in manufacturing processes and covers the heat treatment processes, smelting of metals, and other technological processes such as casting, forming, powder metallurgy, joining processes, and surface technology. Manufacturing processes for polymers, ceramics, and composites are also covered. The book also covers surface technology, fundamentals of traditional and nontraditional machining processes, numerical control of machine tools, industrial robots and hexapods, additive manufacturing, and industry 4.0 technologies. The book is written specifically for undergraduates in industrial, manufacturing, mechanical, and materials engineering disciplines of the second to fourth levels to cover complete courses of manufacturing technology taught in engineering colleges and institutions all over the world. It also covers the needs of production and manufacturing engineers and technologists participating in related industries where it is expected to be part of their professional library. Additionally, the book can be used by students in other disciplines concerned with design and manufacturing, such as automotive and aerospace engineering.

Download or read book Emerging Technology in Precision Engineering XIV written by Tojiro Aoyama and published by Trans Tech Publications Ltd. This book was released on 2012-11-12 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). These 189 conference papers cover a wide variety of topical areas, including: high-precision machining, non-conventional machining, CAD/CAM technology, machine tools and control, MEMS/NEMS, precision/medical devices, mechatronics, mechanical design and tribology, metrology, green manufacturing, advanced molding and forming and other related technologies. This work will certainly stimulate further research and development in the field of precision engineering.

Download or read book Advances on Material Science and Manufacturing Technologies written by Qing Zhou Xu and published by Trans Tech Publications Ltd. This book was released on 2012-12-27 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection includes selected, peer-reviewed papers from the International Conference on Materials Science and Manufacturing (ICMSM2012) held December 14-16, 2012 in Zhangjia Jie, China. It aims to cover the recent advancement and trends in the area of new materials, advanced materials, advanced manufacturing technologies, and manufacturing systems and automation to facilitate knowledge sharing and networking interactions on emerging trends and new challenges.

Download or read book Advanced Materials Processes written by and published by . This book was released on 2005 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Manufacturing Technology XXX written by Y.M. Goh and published by IOS Press. This book was released on 2016-08-15 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: The urgent need to keep pace with the accelerating globalization of manufacturing in the 21st century has produced rapid advancements in manufacturing technology, research and expertise. This book presents the proceedings of the 14th International Conference on Manufacturing Research (ICMR 2016), entitled Advances in Manufacturing Technology XXX. The conference also incorporated the 31st National Conference on Manufacturing Research, and was held at Loughborough University, Loughborough, UK, in September 2016. The ICMR conference is renowned as a friendly and inclusive environment which brings together a broad community of researchers who share the common goal of developing and managing the technologies and operations key to sustaining the success of manufacturing businesses. The proceedings is divided into 14 sections, including: Manufacturing Processes; Additive Manufacturing; Manufacturing Materials; Advanced Manufacturing Technology; Product Design and Development, as well as many other aspects of manufacturing management and innovation. It contains 92 papers, which represents an acceptance rate of 75%. With its comprehensive overview of current developments, this book will be of interest to all those involved in manufacturing today.

Download or read book Hot Embossing written by Matthias Worgull and published by Elsevier. This book was released on 2024-06-17 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Hot Embossing: Theory of Microreplication will present the current state of the art in microreplication with a focus on hot embossing, nanoimprint, thermoforming, and roll-to-roll replication. Polymer processing, the theory of polymers and the processing of polymers are discussed in detail. Aspects of process simulation and the corresponding material models are also covered. The book contains in-depth analysis of processing processes and replication techniques including mold fabrication. Monitoring, data analysis and reliability of molded parts is also discussed. In the Second Edition new processes are included, including the process of micro- and nanothermoforming to generate 3D structures and the hot pulling processes to generate hierarchical structures with high aspect ratios. Based on hot pulling, “Nanofur for Oil-water-separation is a large-scale biomimetic application. Upscaling, especially the seamless roll-to-roll replication, is also explored. The book is designed to cover the entire workflow for a seamless lithographic sleeve.This new edition marks a substantial update of the previous edition, incorporating several new chapters. It is an important resource for materials scientists and engineers working in the areas of micro- and nanofabrication. Comprehensively updated to include new techniques, processes, and variables that have come to prominence in recent years Includes new chapters that address monitoring, properties of molded parts, 3D thermoforming, hot pulling, functional materials, smart surfaces, and upscaling by roll-2-roll Discusses the entire microreplication process, from theory and processes to technology and mold to surface-oriented applications

Download or read book Micro Nano Technology XIV written by Fei Tang and published by Trans Tech Publications Ltd. This book was released on 2013-07-15 with total page 1730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The collection of 276 peer reviewed papers covers various high-tech fields including electronics, machinery, materials, manufacturing, testing, and disciplines of physical, chemical and biological. The papers are grouped as follows: Chapter 1: Micro and Nano Fabrication; Chapter 2: Micro Sensors; Chapter 3: Micro Actuators; Chapter 4: Microfluidics and Nanofluidics; Chapter 5: Bio MEMS and Applications; Chapter 6: Nanomaterials; Chapter 7: Optical MEMS (MOEMS); Chapter 8: Power MEMS; Chapter 9: Nano Devices and NEMS; Chapter 10: Nanobiology, Nano-Bioinformatics, Nanomedicine; Chapter 11: Packaging, Sealing and Assembling Technologies; Chapter 12: MEMS/Nano Related Research.

Download or read book Advanced Technologies in Manufacturing Engineering and Materials written by Yun Hae Kim and published by Trans Tech Publications Ltd. This book was released on 2013-09-04 with total page 2150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 International Forum on Mechanical and Material Engineering (IFMME 2013), June 13-14, Guangzhou, China