Download or read book Materials Surface Processing by Directed Energy Techniques written by Yves Pauleau and published by Elsevier. This book was released on 2006-04-25 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. - Provides a broad overview on modern coating and thin film deposition techniques, and their applications - Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films - Each chapter includes experimental results illustrating various models, mechanisms or theories

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Processing Technology II written by Lian Cheng Zhao and published by Trans Tech Publications Ltd. This book was released on 2012-06-14 with total page 3366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), July 6-8, 2012, Zhuhai, China

Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.

Download or read book Surface Engineering written by R. Kossowsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few years there has been increasing need for systematic and straregically designed experiments of surface morphology evolution resulting form ion bombardment induced sputtering. Although there is an impressive number of investi gations {1} concerned with semiconductor materials as a result of immediate applications, the most systematic investigations have been conducted with fcc metals with particular interest on single crystal Cu {2,3}. Evidence now exists that within certain para meters (i. e ion species (Ar+), ion energy (20-44 KeV), substrate 2 temperature (80-550° K), dose rate (100-500 gA cm- ) , residual x 5 9 pressure (5 10- to 5x10- mm Hg) and polar and azimuthal angle of ion incidence {4} reproducible surface morphology (etch pits and pyramids) is achieved on the (11 3 1) specific crystallographic orientation. The temporal development of individual surface features was alsoobserved in this laterstudy {4}, by employing an in situ ion source in the scanning electron microscope at Salford, a technique also empolyed in studies of the influence of polar angle of ion incidence {5} and surface contaminants {6} on the topographyof Ar+ bombarded Si. Studies have also been made on the variation of incident ion species with the (11 3 1) Cu surface and it was fully recognized {7} that residual surface contaminants when present could playa major role in dictating the morhological evolution.

Download or read book Ion Beam Processing of Materials and Deposition Processes of Protective Coatings written by P.L.F. Hemment and published by Newnes. This book was released on 2012-12-02 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the proceedings of three symposia in the E-MRS series this book is divided into two parts. Part one is concerned with ion beam processing, a particularly powerful and versatile technology which can be used both to synthesise and modify materials, including metals, semiconductors, ceramics and dielectrics, with great precision and excellent control. Furthermore it also deals with the correlated effects in atomic and cluster ion bombardment and implantation.Part two deals with the deposition techniques, characterization and applications of advanced ceramic, metallic and polymeric coatings or thin films for surface protection against corrosion, erosion, abrasion, diffusion and for lubrication of contracting surfaces in relative motion.

Download or read book PRICM 6 written by Young Won Chang and published by Trans Tech Publications Ltd. This book was released on 2007-10-02 with total page 2541 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRICM6 Selected, peer reviewed papers from The Sixth Pacific Rim International Conference On Advanced Materials and Processing, November 5-9, 2007, ICC Jeju, Jeju Island, Korea

Download or read book Ion Implantation Technology 94 written by S. Coffa and published by Newnes. This book was released on 1995-05-16 with total page 1031 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of these proceedings is to present and stimulate discussion on the many subjects related to ion implantation among a broad mix of specialists from areas as diverse as materials science, device production and advanced ion implanters.The contents open with a paper on the future developments of the microelectronics industry in Europe within the framework of the global competition. The subsequent invited and oral presentations cover in detail the following areas: trends in processing and devices, ion-solid interaction, materials science issues, advanced implanter systms, process control and yield, future trends and applications.

Download or read book Electron Ion Plasma Modification of a Hypoeutectoid Al Si Alloy written by Dmitrii Zaguliaev and published by CRC Press. This book was released on 2020-09-27 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron-Ion-Plasma Modification of a Hypereutectic Al-Si Alloy details theoretical and experimental research and computer simulation of structural phase transformations in AlSi10Mn2Ni Silumin on different scale levels under electroexplosion alloying, electron beam processing and electron-plasma alloying at the nanolevel in order to create new materials. The authors summarize and analyze more than 10 years of research on the electron-ion-plasma effect on strength properties and structure-phase states’ transformations of hypoeutectic Silumin. Key Features: Details physical and mathematical models of mechanisms of surface layer hardening under conditions of varying energy effects Offers insights into improved strength characteristics of Silumin Explores optimal processing modes for increased strength and improved tribological characteristics This book is a valuable resource to researchers and engineers involved with the modification of light alloy surfaces for the automotive and aeronautical industry.

Download or read book Ion Beam Treatment of Polymers written by Alexey Kondyurin and published by Newnes. This book was released on 2014-09-25 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion Beam Treatment of Polymers, Second Edition presents the results of polymer investigations and technique development in the field of polymer modification by high-energy ion beams. It shows how to use ion beam equipment in the polymer industry, as well as how to use it to produce new polymer materials. The authors, scientists and researchers active in the field, provide analysis and data from their work, and give an overview of related work by others. The authors focus on wetting, adhesion, hardness, chemical activity, environmental stability, biocompatibility, new synthesis methods, and space flight construction. The technologies of material modification by a beam of high energy ions have wide applications in different fields, from microelectronics to medicine. Historically, ion beam treatment of polymers had fewer applications due to high costs of ion beam equipment and low costs of polymer materials. The modern development of new pulse sources with a high current density and wide ion beams increase the effectiveness of ion beam technology for polymers. - Collates data from many scientists working in polymer chemistry, physics of ion beam implantation, and in development and production of ion beam equipment - Covers industrial and scientific applications of ion beam implanted polymers - Integrates physical and chemical aspects of the processes in polymers treated by ion beams

Download or read book Micro and Nano Sulfide Solid Lubrication written by Haidou Wang and published by Springer Science & Business Media. This book was released on 2013-02-01 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Micro and Nano Sulfide Solid Lubrication" covers the basic principles of sulfide solid lubrication, which is an important field of tribology, an effective means of reducing friction and wear on machine parts, and is closely related to the broader problem of saving energy and materials. This book discusses the low-temperature sulfuration technology which was first developed in China, as well as the two-step methods for preparing various sulfide lubrication films (coatings) created by the authors, which are described in detail. This book is intended for researchers in the fields of tribology, materials science, mechanical design, and structural design. Dr. Haidou Wang and Binshi Xu are both professors at the National Key Laboratory for Remanufacturing, Academy of Armored Forces Engineering, China; Jiajun Liu is a professor at the Department of Mechanical Engineering, Tsinghua University, China.

Download or read book Coatings for Harsh Environments written by Shiladitya Paul and published by MDPI. This book was released on 2020-11-13 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The operation of numerous components that are critical to safety in industries around the world relies on protective coatings. These coatings often allow process equipment to serve a purpose in environments well beyond the operational limit of the uncoated components. Durability, ease of application, repairability, reliability and long-term performance of such coatings are all key to their application. Therefore, this book, Coatings for Harsh Environments, is devoted to research and review articles on the metallic, non-metallic and composite coatings used in aggressive environments. In particular, the topics of interest include, but are not limited to: coatings for high temperature and molten salt applications; thermal spray and cold spray coatings for aggressive environments; corrosion, wear and cavitation resistant coatings; coatings for mitigating marine corrosion; coatings for chemical and petrochemical plants; thermal barrier coatings.

Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fusion Energy Update written by and published by . This book was released on 1980 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Materials and Technologies for Modern Manufacturing written by Lai Jiu Zheng and published by Trans Tech Publications Ltd. This book was released on 2013-09-27 with total page 3008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the Third International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2013), August 24-25, 2013, Dalian, China

Download or read book Energy Research Abstracts written by and published by . This book was released on 1994 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.

Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1976-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: