Download or read book Material Response Characterization written by John Guy Jackson and published by . This book was released on 1977 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Materials Characterization written by Charles A. Evans and published by Gulf Professional Publishing. This book was released on 1992 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is a comprehensive volume on analytical techniques used in materials science for the characterization of surfaces, interfaces and thin films. This flagship volume is a unique, stand-alone reference for materials science practitioners, process engineers, students and anyone with a need to know about the capabilities available in materials analysis. An encyclopedia of 50 concise articles, this book will also be a practical companion to the forthcoming books in the series."--Knovel.
Download or read book Characterization of Biomaterials written by Mangal Roy and published by Elsevier Inc. Chapters. This book was released on 2013-03-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: In joint replacement surgery with suboptimal bone, allograft materials are often used to achieve biological fixation of the metallic implant to the host bone and reducing the implant fixation time. The most commonly used techniques are cemented and hydroxyapatite (HA)-coated metallic implants. Typically, HA coatings are suggested for patients with better bone stock, whereas recommended implant fixation process for most other osteoporotic patients is bone cements. In general, there is a long-standing need to improve the performance of hip and other devices for longer in vivo implant lifetime that can help in reducing the number of revision surgeries, as well as minimizing physical and mental trauma to the patient. To achieve these goals, it is important to understand the mechanical and biological properties of coatings that can influence not only its short- and long-term bioactivity but also life span in vivo. Over the years, it has been recognized that the stability of a coated implant is governed by its physical and mechanical properties. A coating that separates from the implant provides no advantage over an uncoated implant and undesirable due to problems with debris materials, which can lead to osteolysis. Therefore, it is important to properly characterize the coated implants in terms of its physical and mechanical properties. In this chapter, specific details on coating characterization techniques including sample dimensions, sample preparation, experimental procedure and data interpretation are discussed. In particular, the standards and requirements of regulatory organizations are presented elucidating the significance and use of each characterization. It is important to appreciate that mechanical properties of coatings can only be determined with certain coating specification such as coating thickness. This chapter is designed even for non-experts to follow mechanical property characterizations of coatings on medical implants.
Download or read book Materials Characterization Using Nondestructive Evaluation NDE Methods written by Gerhard Huebschen and published by Woodhead Publishing. This book was released on 2016-03-23 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Characterization Using Nondestructive Evaluation (NDE) Methods discusses NDT methods and how they are highly desirable for both long-term monitoring and short-term assessment of materials, providing crucial early warning that the fatigue life of a material has elapsed, thus helping to prevent service failures. Materials Characterization Using Nondestructive Evaluation (NDE) Methods gives an overview of established and new NDT techniques for the characterization of materials, with a focus on materials used in the automotive, aerospace, power plants, and infrastructure construction industries. Each chapter focuses on a different NDT technique and indicates the potential of the method by selected examples of applications. Methods covered include scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques. The authors review both the determination of microstructure properties, including phase content and grain size, and the determination of mechanical properties, such as hardness, toughness, yield strength, texture, and residual stress. - Gives an overview of established and new NDT techniques, including scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques - Reviews the determination of microstructural and mechanical properties - Focuses on materials used in the automotive, aerospace, power plants, and infrastructure construction industries - Serves as a highly desirable resource for both long-term monitoring and short-term assessment of materials
Download or read book Characterization of Polymeric Biomaterials written by Maria Cristina Tanzi and published by Woodhead Publishing. This book was released on 2017-06-20 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization of Polymeric Biomaterials presents a comprehensive introduction on the topic before discussing the morphology and surface characterization of biomedical polymers. The structural, mechanical, and biological characterization is described in detail, followed by invaluable case studies of polymer biomaterial implants. With comprehensive coverage of both theoretical and experimental information, this title will provide scientists with an essential guide on the topic of these materials which are regularly used for clinical applications, such as implants and drug delivery devices. However, a range of novel polymers and the development and modification of existing medical polymers means that there is an ongoing need to satisfy particular design requirements. This book explains the critical and fundamentals methods to characterize polymer materials for biomedical applications. - Presents a self-contained reference on the characterization of polymeric biomaterials - Provides comprehensive information on how to characterize biomedical polymers in order to improve design and synthesis - Includes useful case studies that demonstrate the characterization of biomaterial implants
Download or read book Membrane Characterization written by Nidal Hilal and published by Elsevier. This book was released on 2017-02-18 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane Characterization provides a valuable source of information on how membranes are characterized, an extremely limited field that is confined to only brief descriptions in various technical papers available online. For the first time, readers will be able to understand the importance of membrane characterization, the techniques required, and the fundamental theory behind them. This book focuses on characterization techniques that are normally used for membranes prepared from polymeric, ceramic, and composite materials. - Features specific details on many membrane characterization techniques for various membrane materials of industrial and academic interest - Contains examples of international best practice techniques for the evaluation of several membrane parameters, including pore size, charge, and fouling - Discusses various membrane models more suitable to a specific application - Provides examples of ab initio calculations for the design, optimization, and scale-up of processes based on characterization data
Download or read book Synthesis Modelling and Characterization of 2D Materials and their Heterostructures written by Eui-Hyeok Yang and published by Elsevier. This book was released on 2020-06-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis, Modelling and Characterization of 2D Materials and Their Heterostructures provides a detailed discussion on the multiscale computational approach surrounding atomic, molecular and atomic-informed continuum models. In addition to a detailed theoretical description, this book provides example problems, sample code/script, and a discussion on how theoretical analysis provides insight into optimal experimental design. Furthermore, the book addresses the growth mechanism of these 2D materials, the formation of defects, and different lattice mismatch and interlayer interactions. Sections cover direct band gap, Raman scattering, extraordinary strong light matter interaction, layer dependent photoluminescence, and other physical properties. - Explains multiscale computational techniques, from atomic to continuum scale, covering different time and length scales - Provides fundamental theoretical insights, example problems, sample code and exercise problems - Outlines major characterization and synthesis methods for different types of 2D materials
Download or read book Characterization Techniques for Perovskite Solar Cell Materials written by Meysam Pazoki and published by Elsevier. This book was released on 2019-11-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization Techniques for Perovskite Solar Cell Materials: Characterization of Recently Emerged Perovskite Solar Cell Materials to Provide an Understanding of the Fundamental Physics on the Nano Scale and Optimize the Operation of the Device Towards Stable and Low-Cost Photovoltaic Technology explores the characterization of nanocrystals of the perovskite film, related interfaces, and the overall impacts of these properties on device efficiency. Included is a collection of both main and research techniques for perovskite solar cells. For the first time, readers will have a complete reference of different characterization techniques, all housed in a work written by highly experienced experts. - Explores various characterization techniques for perovskite solar cells and discusses both their strengths and weaknesses - Discusses material synthesis and device fabrication of perovskite solar cells - Includes a comparison throughout the work on how to distinguish one perovskite solar cell from another
Download or read book Emergency Characterization of Unknown Materials written by Rick Houghton and published by CRC Press. This book was released on 2007-10-15 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deliberately, accidentally, or consequentially, first responders and waste site workers handle unknown substances of varying degrees of danger every day. Unidentified chemicals involved with clandestine production of WMD agents or drugs, explosive materials, unlabeled waste, and forensic samples all pose a threat to the worker and those they prote
Download or read book Molecular Characterization of Polymers written by Muhammad Imran Malik and published by Elsevier. This book was released on 2021-03-09 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular Characterization of Polymers presents a range of advanced and cutting-edge methods for the characterization of polymers at the molecular level, guiding the reader through theory, fundamentals, instrumentation, and applications, and supporting the end goal of efficient material selection and improved material performance. Each chapter focuses on a specific technique or family of techniques, including the different areas of chromatography, field flow fractionation, long chain branching, static and dynamic light scattering, mass spectrometry, NMR, X-Ray and neutron scattering, polymer dilute solution viscometry, microscopy, and vibrational spectroscopy. In each case, in-depth coverage explains how to successfully implement and utilize the technique. This practical resource is highly valuable to researchers and advanced students in polymer science, materials science, and engineering, and to those from other disciplines and industries who are unfamiliar with polymer characterization techniques. - Introduces a range of advanced characterization methods, covering aspects such as molecular weight, polydispersity, branching, composition, and tacticity - Enables the reader to understand and to compare the available technique, and implement the selected technique(s), with a view to improving properties of the polymeric material - Establishes a strong link between basic principles, characterization techniques, and real-life applications
Download or read book Experimental Characterization of Advanced Composite Materials written by Leif A. Carlsson and published by CRC Press. This book was released on 2002-10-29 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over much of the last three decades, the evolution of techniques for characterizing composite materials has struggled to keep up with the advances of composite materials themselves and their broadening areas of application. In recent years, however, much work has been done to consolidate test methods and better understand those being used. Finally,
Download or read book Materials Characterization written by Naryanaswami (Mohan) Ranganathan and published by CRC Press. This book was released on 2016-01-05 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, which is a result of a coordinated effort by 22 researchers from five different countries, addresses the methods of determining the local and global mechanical properties of a variety of materials: metals, plastics, rubber, and ceramics. The first chapter treats nanoindentation techniques comprehensively. Chapter 2 concerns polymer surfa
Download or read book Materials Characterization for Systems Performance and Reliability written by James W. McCauley and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sagamore Army Materials Research Conferences have been held in the beautiful Adirondack Mountains of New York State since 1954. Organized and conducted by the Army Materials and Mechanics Research Center (Watertown, Massachusetts) in cooperation with Syracuse University, the Conferences have focused on key issues in Materials Science and Engineering that impact directly on current or future Army problem areas. A select group of speakers and attendees are assembled from academia, industry, and other parts of the Department of Defense and Government to provide an optimum forum for a full dialogue on the selected topic. This book is a collection of the full manuscripts of the formal presentations given at the Conference. The emergence and use of nontraditional materials and the excessive failures and reject rates of high technology, materials intensive engineering systems necessitates a new approach to quality control. Thus, the theme of this year's Thirty-First Conference, "Materials Characterization for Systems Performance and Reliability," was selected to focus on the need and mechanisms to transition from defect interrogation of materials after production to utilization of materials characterization during manufacturing. The guidance and help of the steering committee and the dedicated and conscientious efforts of Ms. Karen Ka100stian, Con ference Coordinator, and Mr. William K. Wilson, and Ms. Mary Ann Holmquist are gratefully acknowledged. The continued active interest and support of Dr. Edward S. Wright, Director, AMMRC; Dr. Robert W. Lewis, Associate Director, AMMRC; and COL L. C. Ross, Commander/ Deputy Director, AMMRC; are greatly appreciated.
Download or read book Characterization of Advanced Materials written by W. Altergott and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization Techniques and Tabulations for Organic Nonlinear Optical Materials written by Mark G. Kuzyk and published by CRC Press. This book was released on 2018-05-11 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: ""Furnishes table of nonlinear optical properties of organic substances as well as experimental procedures for measuring the nonlinearity of the elements tabulated, including composite materials-offering support for scientists and engineers involved in characterizing, optimizing, and producing materials for manufacturing optical devices.
Download or read book Multi Scale Modeling and Characterization of Infrastructure Materials written by Niki Kringos and published by Springer Science & Business Media. This book was released on 2013-05-26 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The micro- and nano-modification of infrastructure materials and the associated multi-scale characterization and simulation has the potential to open up whole new uses and classes of materials, with wide-ranging implications for society. The use of multi-scale characterization and simulation brings the ability to target changes at the very small scale that predictably effect the bulk behavior of the material and thus allowing for the optimization of material behavior and performance. The International RILEM Symposium on Multi-Scale Modeling and Characterization of Infrastructure Materials (Stockholm, June 10-12, 2013) brought together key researchers from around the world to present their findings and ongoing research in this field in a focused environment with extended discussion times. From asphalt to concrete, from chemistry to mechanics, from nano- to macro-scale: the collection of topics covered by the Symposium represents the width and depth of the currently ongoing efforts of developing more sustainable infrastructure materials. Researchers, practitioners, undergraduates and graduate students engaged in infrastructure materials or multi-scale characterization and modeling efforts can use this book as a comprehensive reference, to learn about the currently ongoing research efforts in this field or as an inspiration for new research ideas to enhance the long-term performance of infrastructure materials from a fundamental perspective. The Symposium was held under the auspices of the RILEM Technical Committee on Nanotechnology-Based Bituminous Materials 231-NBM and the Transport Research Board (TRB) Technical Committee on Characteristics of Asphalt Materials AFK20.
Download or read book Computational Methods and Experiments in Materials Characterization II written by C. A. Brebbia and published by WIT Press. This book was released on 2005 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the work of practitioners in many fields of engineering, materials and computational science, this book includes most of the papers presented at the Second International Conference on Material Characterisation. Compiled with the central aim of encouraging interaction between experimentalists and modelers, the contributions featured are divided under the following sections: MICROSTRUCTURES ? Composites; Alloys; Ceramics; Cements; Foams; Suspensions; Biomaterials; Thin Films; Coatings. EXPERIMENTAL METHODS - Optical Imaging; SEM, TEM; X-Ray Microtomography; Ultrasonic Techniques; NMR/MRI; Micro/Nano Indentation; Thermal Analysis; Surface Chemistry. COMPUTATIONAL METHODS - Continuum Methods (FEM, FV, BEM); Particle Models (MD, DPD, Lattice-Boltzmann); Montecarlo Methods; Cellular Automata; Hybrid Multiscale Methods; and Damage Mechanics.
