Download or read book Material Identification Using Mixed Numerical Experimental Methods written by Hugo Sol and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Euromech 357 took place in the nice authentic monastery 'Rolduc' in Kerkrade, Holland. The objective was to bring together researchers to present their latest advancements in the relatively new domain of Material properties identification by Mixed Numerical Experimental Methods (MMM). MMM are a modem and increasingly powerful way to determine the values of unknown parameters in a numerical model by observations made on real physical test structures. Starting from the measurement of output values (like displacements, stresses, velocities, vibrations, .. ) of the real physical test structure, MMM try to update parameters in the numerical model in such a way that the computed observations match the experimental observations. It was shown clearly at the colloquium that the combined use of numerical analysing tools and sophisticated measurement techniques has created an extra degree of freedom for the design of experiments and has led to new approaches for material characterisation. The colloquium was attended by 39 participants coming from 12 different European countries. We had 23 oral presentations on the different topics of the above mentioned sessions. Each presentation was followed by an intensive discussion. Du~ to the informal atmosphere and the limited number of participants, the discussions were very lively and fruitful. The opportunity to continue to discuss common problems after dinner in a reserved place was also offered to the Euromech participants. This opportunity and the fact that the monastery was isolated (nobody could escape!) created an excellent platform for discussions and personal contacts.
Download or read book Parameter Identification of Materials and Structures written by Zenon Mróz and published by Springer Science & Business Media. This book was released on 2007-04-28 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nature and the human creations are full of complex phenomena, which sometimes can be observed but rarely follow our hypotheses. The best we can do is to build a parametric model and then try to adjust the unknown parameters based on the available observations. This topic, called parameter identification, is discussed in this book for materials and structures. The present volume of lecture notes follows a very successful advanced school, which we had the honor to coordinate in Udine, October 6-10, 2003. The authors of this volume present a wide spectrum of theories, methods and applications related to inverse and parameter identification problems. We thank the invited lecturers and the authors of this book for their contributions, the participants of the course for their active participation and the interesting discussions as well as the people of CISMfor their hospitality and their well-known professional help. Zenon Mroz Georgios E. Stavroulakis CONTENTS Preface An overview of enhanced modal identification by L. Bolognini 1 The reciprocity gap functional for identifying defects and cracks by H. D. Bui, A. Constantinescu and H. Maigre 17 Some innovative industrial prospects centered on inverse analyses by G. Maier, M. Bocciarelli andR. Fedele 55 Identification of damage in beam and plate structures using parameter dependent modal changes and thermographic methods by Z. Mroz andK. Dems 95 Crack and flaw identification in statics and dynamics, using filter algorithms and soft computing by G. E, Stavroulakis, M. Engelhardt andH.
Download or read book Modern Trends in Composite Laminates Mechanics written by Holm Altenbach and published by Springer. This book was released on 2014-05-04 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the book is to give a clear picture of some new modern trends in composite mechanics and to give a presentation of the current state-of-the-art of the theory and application of composite laminates. The book addresses the basics as well as recent developments in the theory of laminates and their effective properties, the problem of testing and identification of properties, strength, damage, and failure of composite laminates, lightweight construction principles, optimization techniques, the generation of smart structures, and a number of special technical aspects (e.g. stress localization), their modelling and analysis. The intention of the book is to provide deeper understanding, to give mathematical and algorithmic techniques for analysis, simulation and optimization and to link various aspects of composite mechanics as necessary to exploit the full potential that is possible for composite structures.
Download or read book Experimental Analysis of Nano and Engineering Materials and Structures written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 1003 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains two-page abstracts of the 482 papers presented at the latest conference on the subject, in Alexandroupolis, Greece. The accompanying CD contains the full length papers. The abstracts of the fifteen plenary lectures are included at the beginning of the book. The remaining 467 abstracts are arranged in 23 tracks and 28 special symposia/sessions with 225 and 242 abstracts, respectively. The papers of the tracks have been contributed from open call, while the papers of the symposia/sessions have been solicited by the respective organizers.
Download or read book Emerging Technologies in NDT written by Gerhard Busse and published by CRC Press. This book was released on 2008-04-16 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-destructive testing (NDT) is a pertinent task in nearly every field of human activity, from the assuring of aircraft integrity to the evaluation of infrastructural decay caused by deterioration or damage. The development of non-destructive methods for quality management results in economic and environmental benefits, in an increase in
Download or read book Recent Developments in Durability Analysis of Composite Systems written by H. Dardon and published by CRC Press. This book was released on 2022-01-26 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers from these proceedings address experimental and analytical methods for the characterization and analysis of modern composite and adhesive systems. They have been produced to provide understanding that can be used to design safe, reliable engineering components.
Download or read book Advancement of Optical Methods in Experimental Mechanics Volume 3 written by Helena Jin and published by Springer Science & Business Media. This book was released on 2013-08-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancement of Optical Methods in Experimental Mechanics: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the third volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas: Optical metrology and displacement measurements at different scales Digital holography and experimental mechanics Optical measurement systems using polarized light Surface topology Digital image correlation Optical methods for MEMS and NEMS Three-dimensional imaging and volumetric correlation Imaging methods for thermomechanics applications 3D volumetric flow measurement Applied photoelasticity Optical residual stress measurement techniques Advances in imaging technologies
Download or read book Dynamic Behavior of Materials Volume 1 written by Bo Song and published by Springer Science & Business Media. This book was released on 2013-10-01 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the first volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: General Dynamic Material Properties Novel Dynamic Testing Techniques Dynamic Fracture and Failure Novel Testing Techniques Dynamic Behavior of Geo-materials Dynamic Behavior of Biological and Biomimetic Materials Dynamic Behavior of Composites and Multifunctional Materials Dynamic Behavior of Low-Impedance materials Multi-scale Modeling of Dynamic Behavior of Materials Quantitative Visualization of Dynamic Behavior of Materials Shock/Blast Loading of Materials
Download or read book Recent Advances in Experimental Mechanics written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 71 papers presented at the symposium on “Recent Advances in Experimental Mechanics” which was organized in honor of Professor Isaac M. Daniel. The symposium took place at Virginia Polytechnic Institute and State University on th June 23-28, 2002, in conjunction with the 14 US National Congress of Applied Mechanics. The book is a tribute to Isaac Daniel, a pioneer of experimental mechanics and composite materials, in recognition of his continuous, original, diversified and outstanding contributions for half a century. The book consists of invited papers written by leading experts in the field. It contains original contributions concerning the latest developments in experimental mechanics. It covers a wide range of subjects, including optical methods of stress analysis (photoelasticity, moiré, etc.), composite materials, sandwich construction, fracture mechanics, fatigue and damage, nondestructive evaluation, dynamic problems, fiber optic sensors, speckle metrology, digital image processing, nanotechnology, neutron diffraction and synchrotron radiation methods. The papers are arranged in the following nine sections: Mechanical characterization of material behavior, composite materials, fracture and fatigue, optical methods, n- destructive evaluation, neutron diffraction and synchrotron radiation methods, hybrid methods, composite structures, and structural testing and analysis.
Download or read book Advances in Fracture Research written by Alberto Carpinteri and published by Springer Science & Business Media. This book was released on 2007-01-30 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a spin-off from the International Journal of Fracture and collects lectures and papers presented at the 11th International Conference on Fracture (ICF11), March 20-25, 2005. Included in this volume are introductory addresses, as well as remarks on the presentation of honorary degrees. A collection of papers follows, including presentations by such eminent scientists as B.B. Mandelbrot, G.I. Barenblatt, and numerous others, reviewing advanced research in fracture.
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book Comprehensive Structural Integrity written by I. Milne and published by Elsevier. This book was released on 2003 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boundary Element Advances in Solid Mechanics written by Dimitri Beskos and published by Springer. This book was released on 2014-05-04 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents and discusses recent advances in boundary element methods and their solid mechanics applications. It illustrates these methods in their latest forms, developed during the last five to ten years, and demonstrates their advantages in solving a wide range of solid mechanics problems.
Download or read book Mechanics of Structures and Materials written by M.A. Bradford and published by CRC Press. This book was released on 1999-01-01 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural mechanics in Australasia is the focus of the some 100 papers, but among them are also contributions from North America, Japan, Britain, Asia, and southeast Asia.
Download or read book Materials Characterisation VI written by C. A. Brebbia and published by WIT Press. This book was released on 2013 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers to be presented at the Sixth International Conference on the topic. Materials modelling and characterisation have become ever more closely intertwined. Characterisation, in essence, connects the abstract material model with the real-world behaviour of the material in question. Characterisation of complex materials often requires a combination of experimental and computational techniques. The conference is convened biennially to facilitate the sharing of recent work between researchers who use computational methods, those who perform experiments, and those who do both, in all areas of materials characterisation.The papers cover such topics as: Computational models and experiments; Mechanical characterisation and testing; Micro and macro materials characterisation; Corrosion problems; Innovative experimental technologies; Recycled materials; Thermal analysis; Advances in composites; Cementitious materials; Structural health monitoring; Energy materials.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1992 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inverse Problems in Engineering Mechanics II written by G.S. Dulikravich and published by Elsevier. This book was released on 2000-12-11 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inverse Problems are found in many areas of engineering mechanics and there are many successful applications e.g. in non-destructive testing and characterization of material properties by ultrasonic or X-ray techniques, thermography, etc. Generally speaking, inverse problems are concerned with the determination of the input and the characteristics of a system, given certain aspects of its output. Mathematically, such problems are ill-posed and have to be overcome through development of new computational schemes, regularization techniques, objective functionals, and experimental procedures. Following the IUTAM Symposium on these topics, held in May 1992 in Tokyo, another in November 1994 in Paris, and also the more recent ISIP'98 in March 1998 in Nagano, it was concluded that it would be fruitful to gather regularly with researchers and engineers for an exchange of the newest research ideas. The most recent Symposium of this series "International Symposium on Inverse Problems in Engineering Mechanics (ISIP2000)" was held in March of 2000 in Nagano, Japan, where recent developments in inverse problems in engineering mechanics and related topics were discussed.The following general areas in inverse problems in engineering mechanics were the subjects of ISIP2000: mathematical and computational aspects of inverse problems, parameter or system identification, shape determination, sensitivity analysis, optimization, material property characterization, ultrasonic non-destructive testing, elastodynamic inverse problems, thermal inverse problems, and other engineering applications. The papers in these proceedings provide a state-of-the-art review of the research on inverse problems in engineering mechanics and it is hoped that some breakthrough in the research can be made and that technology transfer will be stimulated and accelerated due to their publication.
