Download or read book Material Forming ESAFORM 2012 written by Marion Merklein and published by Trans Tech Publications Ltd. This book was released on 2012-02-03 with total page 1426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 15th Conference of the European Scientific Association on Material Forming, (ESAFORM 2012), March 14-16, 2012, Erlangen, Germany

Download or read book Material Forming written by Anna Carla Araujo and published by Materials Research Forum LLC. This book was released on 2024-05-20 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: These ESAFORM 2024 conference proceedings cover a wide range of topics: Additive manufacturing; Composites forming processes; Extrusion and drawing; Forging and rolling; Formability of metallic materials; Friction and wear in metal forming; Incremental and sheet metal forming; Innovative joining by forming technologies; Optimization and inverse analysis in forming; Machining, Cutting and severe plastic deformation processes; Material behavior modelling; New and advanced numerical strategies for material forming; Non-conventional processes; Polymer processing and thermomechanical properties; Sustainability on material forming. Keywords: WAAM Technology, Fused deposition Modeling (FDM), Fiber Composite Printers, Ultrasonic Powder Atomization, Finite Element Modeling (FEM), Laser Powder Bed Fusion (L-PBF), Rapid Prototyping in Additive Manufacturing, Directed Energy Deposition (DED), GTAW Droplet Deposition, Deep Learning, Thermoplastic Pultrusion, Textile Reinforcements, Thermoforming Simulation, New Sustainable Materials, Non-Crimp Fabrics, CFRP Scraps, PEEK Composites, Thermoplastic Sheets, Flax/PP Composites.

Download or read book Material Forming written by Lukasz Madej and published by Materials Research Forum LLC. This book was released on 2023-04-25 with total page 2163 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings present papers on Additive Manufacturing, Composites Forming Processes, Extrusion and Drawing, Forging and Rolling, Formability of Metallic Materials, Friction and Wear in Metal Forming, Incremental and Sheet Metal Forming, Innovative Joining by Forming Technologies, Lionel Fourment MS on Optimization and Inverse Analysis in Forming, Machining and Cutting, Material Behavior Modelling, New and Advanced Numerical Strategies for Material Forming, Non-Conventional Processes, Polymer Processing and Thermomechanical Properties, Sustainability on Material Forming, and Property-Controlled Forming.

Download or read book Micro Metal Forming written by Frank Vollertsen and published by Springer Science & Business Media. This book was released on 2013-05-13 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Metal Forming, i. e. forming of parts and features with dimensions below 1 mm, is a young area of research in the wide field of metal forming technologies, expanding the limits for applying metal forming towards micro technology. The essential challenges arise from the reduced geometrical size and the increased lot size. In order to enable potential users to apply micro metal forming in production, information about the following topics are given: tribological behavior: friction between tool and work piece as well as tool wear mechanical behavior: strength and formability of the work piece material, durability of the work pieces size effects: basic description of effects occurring due to the fact, that the quantitative relation between different features changes with decreasing size process windows and limits for forming processes tool making methods numerical modeling of processes and process chains quality assurance and metrology All topics are discussed with respect to the questions relevant to micro metal forming. The description comprises information from actual research and the young history of this technology branch to be used by students, scientists and engineers in industry who already have a background in metal forming and like to expand their knowledge towards miniaturization. tribological behavior: friction between tool and work piece as well as tool wear mechanical behavior: strength and formability of the work piece material, durability of the work pieces size effects: basic description of effects occurring due to the fact, that the quantitative relation between different features changes with decreasing size process windows and limits for forming processes tool making methods numerical modeling of processes and process chains quality assurance and metrology All topics are discussed with respect to the questions relevant to micro metal forming. The description comprises information from actual research and the young history of this technology branch to be used by students, scientists and engineers in industry who already have a background in metal forming and like to expand their knowledge towards miniaturization.

Download or read book American Society of Composites 28th Technical Conference written by Charles Bakis and published by DEStech Publications, Inc. This book was released on 2013-11-01 with total page 1892 pages. Available in PDF, EPUB and Kindle. Book excerpt: New and unpublished U.S. and international research on multifunctional, active, biobased, SHM, self-healing composites -- from nanolevel to large structures New information on modeling, design, computational engineering, manufacturing, testing Applications to aircraft, bridges, concrete, medicine, body armor, wind energy This fully searchable CD-ROM contains 135 original research papers on all phases of composite materials. The document provides cutting edge research by US, Canadian, and Japanese authorities on matrix-based and fiber composites from design to damage analysis and detection. Major divisions of the work include: Structural Health Monitoring, Multifunctional Composites, Integrated Computational Materials Engineering, Interlaminar Testing, Analysis-Shell Structures, Thermoplastic Matrices, Analysis Non-classical Laminates, Bio-Based Composites, Electrical Properties, Dynamic Behavior, Damage/Failure, Compression-Testing, Active Composites, 3D Reinforcement, Dielectric Nanocomposites, Micromechanical Analysis, Processing, CM Reinforcement for Concrete, Environmental Effects, Phase-Transforming, Molecular Modeling, Impact.

Download or read book Handbook of Software Solutions for ICME written by Georg J. Schmitz and published by John Wiley & Sons. This book was released on 2016-09-20 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the results of an ambitious project, this handbook provides a well-structured directory of globally available software tools in the area of Integrated Computational Materials Engineering (ICME). The compilation covers models, software tools, and numerical methods allowing describing electronic, atomistic, and mesoscopic phenomena, which in their combination determine the microstructure and the properties of materials. It reaches out to simulations of component manufacture comprising primary shaping, forming, joining, coating, heat treatment, and machining processes. Models and tools addressing the in-service behavior like fatigue, corrosion, and eventually recycling complete the compilation. An introductory overview is provided for each of these different modelling areas highlighting the relevant phenomena and also discussing the current state for the different simulation approaches. A must-have for researchers, application engineers, and simulation software providers seeking a holistic overview about the current state of the art in a huge variety of modelling topics. This handbook equally serves as a reference manual for academic and commercial software developers and providers, for industrial users of simulation software, and for decision makers seeking to optimize their production by simulations. In view of its sound introductions into the different fields of materials physics, materials chemistry, materials engineering and materials processing it also serves as a tutorial for students in the emerging discipline of ICME, which requires a broad view on things and at least a basic education in adjacent fields.

Download or read book Material Forming Processes written by Bouchaib Radi and published by John Wiley & Sons. This book was released on 2016-09-16 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing industries strive to improve the quality and reliability of their products, while simultaneously reducing production costs. To do this, modernized work tools must be produced; this will enable a reduction in the duration of the product development cycle, optimization of product development procedures, and ultimately improvement in the productivity of design and manufacturing phases. Numerical simulations of forming processes are used to this end, and in this book various methods and models for forming processes (including stamping, hydroforming and additive manufacturing) are presented. The theoretical and numerical advances of these processes involving large deformation mechanics on the basis of large transformations are explored, in addition to the various techniques for optimization and calculation of reliability. The advances and techniques within this book will be of interest to professional engineers in the automotive, aerospace, defence and other industries, as well as graduates and undergraduates in these fields.

Download or read book Engineering Optimization 2014 written by Hélder Rodrigues and published by CRC Press. This book was released on 2014-09-26 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern engineering processes and tasks are highly complex, multi- and interdisciplinary, requiring the cooperative effort of different specialists from engineering, mathematics, computer science and even social sciences. Optimization methodologies are fundamental instruments to tackle this complexity, giving the possibility to unite synergistically team members’ inputs and thus decisively contribute to solving new engineering technological challenges. With this context in mind, the main goal of Engineering Optimization 2014 is to unite engineers, applied mathematicians, computer and other applied scientists working on research, development and practical application of optimization methods applied to all engineering disciplines, in a common scientific forum to present, analyze and discuss the latest developments in this area. Engineering Optimization 2014 contains the edited papers presented at the 4th International Conference on Engineering Optimization (ENGOPT2014, Lisbon, Portugal, 8-11 September 2014). ENGOPT2014 is the fourth edition of the biennial “International Conference on Engineering Optimization”. The first conference took place in 2008 in Rio de Janeiro, the second in Lisbon in 2010 and the third in Rio de Janeiro in 2012. The contributing papers are organized around the following major themes: - Numerical Optimization Techniques - Design Optimization and Inverse Problems - Effi cient Analysis and Reanalysis Techniques - Sensitivity Analysis - Industrial Applications - Topology Optimization For Structural Static and Dynamic Failures - Optimization in Oil and Gas Industries - New Advances in Derivative-Free Optimization Methods for Engineering Optimization - Optimization Methods in Biomechanics and Biomedical Engineering - Optimization of Laminated Composite Materials - Inverse Problems in Engineering Engineering Optimization 2014 will be of great interest to engineers and academics in engineering, mathematics and computer science.

Download or read book Incremental Sheet Forming Technologies written by Ajay and published by CRC Press. This book was released on 2020-09-24 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incremental Sheet Forming (ISF) exempts use of dies and reduces cost for manufacturing complex parts. Sheet metal forming is used for producing high-quality components in automotive, aerospace, and medical industries. This book covers the benefits of this new technology, including the process parameters along with various techniques. Each variant of this novel process is discussed along with the requirements of machinery and hardware. In addition, appropriate guidelines are also suggested regarding the relationship between process parameters and aspects of ISF process in order to ensure the applicability of the process on the industrial scale. This book will be a useful asset for researchers, engineers in manufacturing industries, and postgraduate level courses.

Download or read book Modeling the Material Behavior under Metal Cutting Conditions written by Marvin Hardt and published by Apprimus Wissenschaftsverlag. This book was released on 2022-03-16 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific goal of the present work was to model the workpiece material behavior of steels in the metal cutting process depending on the occurring thermo-mechanical loads. The results of this work shall make a significant contribution to the predictive process design of the cutting process by means of Finite Element (FE) simulations for the virtual representation of the reality in the sense of the digital twin. To achieve the objective, extensive empirical examinations were conducted in a first step, which included conventional material scientific and orthogonal cutting tests. This enabled the establishment of a database of the workpiece response with increasing thermo-mechanical loads. During the orthogonal cutting examinations, integral and locally resolved process results were measured, which were used as calibration and validation variables in the modeling of the workpiece material behavior. By extending an established friction test bench with a workpiece pre-heating system, the friction conditions between tool and workpiece could be investigated under conditions equivalent to the cutting process. Based on the experimental results, a friction model was derived, in which the observed effects of thermal softening and the localized adhesion-induced increase in the apparent friction coefficient were superposed. A phenomenological material model was developed to describe the workpiece material behavior in the cutting process. The formulation of the material mode was developed based on empirical examinations as well as results from the state of the art. The material model was implemented in an FE-chip formation simulation using a subroutine. A hybrid optimization algorithm was developed to inversely determine the material model parameters. By means of the optimization algorithm, the material model parameters could be systematically determined inversely, taking the experimentally determined process observables into account. An automated procedure linked to a user interface lowered the entry hurdle for industrial companies and unexperienced users of FE-simulations and reduced the computational effort for the inverse parameter determination to about 10 days of computational execution time. The quality of the developed models and the determined model parameters were further verified by a final deduction step using the industrial example of face turning.

Download or read book Cold Micro Metal Forming written by Frank Vollertsen and published by Springer Nature. This book was released on 2019-09-13 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book contains the research report of the Collaborative Research Center “Micro Cold Forming” (SFB 747) of the University of Bremen, Germany. The topical research focus lies on new methods and processes for a mastered mass production of micro parts which are smaller than 1mm (by forming in batch size higher than one million). The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.

Download or read book Recent Advances in Intelligent Manufacturing written by Shilong Wang and published by Springer. This book was released on 2018-09-04 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set CCIS 923, CCIS 924, and CCIS 925 constitutes the thoroughly refereed proceedings of the First International Conference on Intelligent Manufacturing and Internet of Things, and of the 5th International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2018, held in Chongqing, China, in September 2018.The 135 revised full papers presented were carefully reviewed and selected from over 385 submissions.The papers of this volume are organized in topical sections on: digital manufacturing; industrial product design; logistics, production and operation management; manufacturing material; manufacturing optimization; manufacturing process; mechanical transmission system; robotics.

Download or read book Smart Manufacturing Innovation and Transformation Interconnection and Intelligence written by Luo, ZongWei and published by IGI Global. This book was released on 2014-03-31 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fast advances in information technology have led to a smarter world vision with ubiquitous interconnection and intelligence. Smart Manufacturing Innovation and Transformation: Interconnection and Intelligence covers both theoretical perspectives and practical approaches to smart manufacturing research and development triggered by ubiquitous interconnection and intelligence. This reference work discusses the transformation of manufacturing, the latest developments in smart manufacturing innovation, current and emerging technology opportunities, and market imperatives that enable manufacturing innovation and transformation, useful tools for readers in industry, academia, and government.

Download or read book Integrative Production Technology written by Christian Brecher and published by Springer. This book was released on 2017-01-09 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students.

Download or read book Encyclopedia of Aluminum and Its Alloys Two Volume Set Print written by George E. Totten and published by CRC Press. This book was released on 2018-12-07 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia, written by authoritative experts under the guidance of an international panel of key researchers from academia, national laboratories, and industry, is a comprehensive reference covering all major aspects of metallurgical science and engineering of aluminum and its alloys. Topics covered include extractive metallurgy, powder metallurgy (including processing), physical metallurgy, production engineering, corrosion engineering, thermal processing (processes such as metalworking and welding, heat treatment, rolling, casting, hot and cold forming), surface engineering and structure such as crystallography and metallography.

Download or read book Metal Forming 2024 written by Danuta Szeliga and published by Materials Research Forum LLC. This book was released on 2024-09-15 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers a great range of topics, including (1) Incremental forming and metal forming of 3D printed materials; (2) numerical modeling of processes and systems; (3) material characterization techniques for predicting microstructure evolution and mechanical properties during or after thermomechanical processing; (4) constitutive and numerical modeling, as well as process and system optimization. The materials covered include metal powders, lightweight systems, advanced high-strength steels, multiphase materials, and high-entropy alloys.

Download or read book Yearbook of International Organizations 2014 2015 Volumes 1a 1b Set written by Union Of International Associations and published by . This book was released on 2014-06-16 with total page 1452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 (A and B) covers international organizations throughout the world, comprising their aims, activities and events.