Download or read book Material Engineering and Manufacturing II written by Xiao Hong Zhu and published by Trans Tech Publications Ltd. This book was released on 2020-01-28 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd International Conference on Material Engineering and Manufacturing (ICMEM 2019) and the 4th International Conference on Materials Engineering and Nanotechnology (ICMEN 2019) were dedicated to new research developments and advances in the fields of material engineering, nanotechnology, and manufacturing technologies. We hope that the presented collection of scientific papers will be interesting and useful for many engineers and researchers.

Download or read book Advances in Materials Mechanics and Manufacturing II written by Mounir Ben Amar and published by Springer Nature. This book was released on 2021-09-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing. Chapters are based on contributions to the third International Conference on Advanced Materials Mechanics and Manufacturing, A3M2021, organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia and held online on March 25-27, 2021. They cover a variety of topics, spanning from experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. Offering a good balance of fundamental research and industrially relevant findings, they provide researchers and professionals with a timely snapshot of and extensive information on current developments in the field and a source of inspiration for future research and collaboration.

Download or read book Materials Enabled Designs written by Michael Pfeifer and published by Butterworth-Heinemann. This book was released on 2009-06-02 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are books aplenty on materials selection criteria for engineering design. Most cover the physical and mechanical properties of specific materials, but few offer much in the way of total product design criteria. This innovative new text/reference will give the "Big picture view of how materials should be selected—not only for a desired function but also for their ultimate performance, durability, maintenance, replacement costs, and so on. Even such factors as how a material behaves when packaged, shipped, and stored will be taken into consideration. For without that knowledge, a design engineer is often in the dark as to how a particular material used in particular product or process is going to behave over time, how costly it will be, and, ultimately, how successful it will be at doing what is supposed to do. This book delivers that knowledge.* Brief but comprehensive review of major materials functional groups (mechanical, electrical, thermal, chemical) by major material categories (metals, polymers, ceramics, composites)* Invaluable guidance on selection criteria at early design stage, including such factors as functionality, durability, and availability* Insight into lifecycle factors that affect choice of materials beyond simple performance specs, including manufacturability, machinability, shelf life, packaging, and even shipping characteristics* Unique help on writing materials selection specifications

Download or read book Materials Industrial and Manufacturing Engineering Research Advances 2 written by Denni Kurniawan and published by Trans Tech Publications Ltd. This book was released on 2015-10-02 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2015), February 4-6, 2015, Bali, Indonesia

Download or read book Advances in Manufacturing Engineering and Materials II written by Sergej Hloch and published by Springer Nature. This book was released on 2021-03-16 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technologies in the field of advanced manufacturing and materials, with a special emphasis on unconventional machining process, rapid prototyping and biomaterials. It gathers contributions to the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), which was originally planned in June 2020, but will actually take place in 2021, in Nový Smokovec, Slovakia, because of the Covid-19 pandemic. Despite the challenging times, submitted contributions were peer-reviewed, and upon a careful revision, included in this book, which covers advances that are expected to increase the industry’s competitiveness with regard to sustainable development and preservation of the environment and natural resources. Condition monitoring, industrial automation, and diverse fabrication processes such as welding, casting and molding, as well as tribology and bioengineering, are just a few of the topics discussed in the book’s wealth of authoritative contributions. A special emphasis is given to problems connected to climate change and solution manufacturer and engineers may adopt and develop to prevent and cope with them.

Download or read book Materials and Manufacturing An Introduction to How they Work and Why it Matters written by Mark Atwater and published by McGraw Hill Professional. This book was released on 2018-09-14 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to materials and manufacturing concepts and applicationsWritten in a straightforward, conversational style, this comprehensive textbook offers a hands-on introduction to materials science and manufacturing techniques. You will explore metallic and nonmetallic materials, their properties and applications, and how products are made from them, including traditional, additive, and advanced manufacturing methods. Materials and Manufacturing: An Introduction to How They Work and Why It Matters starts off by explaining materials science fundamentals and progresses to outline manufacturing processes in the order in which they are often employed. Coverage includes:•Metallic materials and processing•Nonmetallic materials and processing•Practical considerations in materials and manufacturing•Material structure, identification, and application•Compositional and property-based classification•Mechanical, thermal, and environmental concepts•Methods of testing materials•Sawing, broaching, filing, and abrasive machining•Milling, turning, boring, and hole making operations•Cohesive assembly through heat and chemical welding•Mechanical and adhesive assembly and finishing operations•The benefits and roles of additive and advanced manufacturing

Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student.Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books.This book covers a wider range of materials and processes than is customary in the elementary materials science books.* Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text* Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works* Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology

Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.

Download or read book Materials Engineering and Technologies for Production and Processing II written by Andrey A. Radionov and published by Trans Tech Publications Ltd. This book was released on 2016-09-05 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition published by results of International Conference on Industrial Engineering (ICIE-2016, May 19-20, 2016, Chelyabinsk, Russian Federation). In the issue are collected scientific papers from area of materials engineering and technologies for materials production and processing in the different areas of modern manufacturing. This collection will be useful for wide range of engineers and scientists from different areas of engineering knowledges.

Download or read book Material Engineering and Manufacturing written by Xiao Hong Zhu and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains papers collected on the results of the 2nd International Conference on Material Engineering and Manufacturing (ICMEM2018, Xi'an, China, May 26-28, 2018). The main goal of the conference was to provide the intensive discussion about the modern direction of scientific research and engineering techniques in the field of materials science and materials processing technologies. Metals, Alloys, Polymers, Composites, Ceramics, Nanomaterials, Chemical Technologies, Building Materials, Materials Processing Materials Science.

Download or read book Manufacturing Engineering Processes Second Edition written by Alting and published by CRC Press. This book was released on 1993-11-23 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responding to the need for an integrated approach in manufacturing engineering oriented toward practical problem solving, this updated second edition describes a process morphology based on fundamental elements that can be applied to all manufacturing methods - providing a framework for classifying processes into major families with a common theoretical foundation. This work presents time-saving summaries of the various processing methods in data sheet form - permitting quick surveys for the production of specific components.;Delineating the actual level of computer applications in manufacturing, this work: creates the basis for synthesizing process development, tool and die design, and the design of production machinery; details the product life-cycle approach in manufacturing, emphasizing environmental, occupational health and resource impact consequences; introduces process planning and scheduling as an important part of industrial manufacturing; contains a completely revised and expanded section on ceramics and composites; furnishes new information on welding arc formation and maintenance; addresses the issue of industrial safety; and discusses progress in non-conventional processes such as laser processing, layer manufacturing, electrical discharge, electron beam, abrasive jet, ultrasonic and eltrochemical machining.;Revealing how manufacturing methods are adapted in industry practices, this work is intended for use by students of manufacturing engineering, industrial engineering and engineering design; and also for use as a self-study guide by manufacturing, mechanical, materials, industrial and design engineers.

Download or read book Manufacturing written by Beno Benhabib and published by CRC Press. This book was released on 2003-07-03 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept development to final production, this comprehensive text thoroughly examines the design, prototyping, and fabrication of engineering products and emphasizes modern developments in system modeling, analysis, and automatic control. This reference details various management strategies, design methodologies, traditional production techniqu

Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.

Download or read book Manufacturing Engineering written by John P. Tanner and published by CRC Press. This book was released on 2020-07-24 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and updated introduction, useful as a reference source for engineers and managers or as a text for upper-level undergraduate and graduate courses in technical colleges and universities. Includes end-of-chapter questions (an answer book is provided for teachers). Annotation copyright Book New

Download or read book Management Manufacturing and Materials Engineering II written by Senera Lu and published by Trans Tech Publications Ltd. This book was released on 2012-12-13 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main goal of the present series of conferences is to provide international scientific fora for the exchange of new ideas in a number of fields and interact in depth via discussions with their peers from around the word. The research areas include Management Engineering, Manufacturing Engineering and Modeling, System Modeling and Simulation, Automation Control and Applications, Materials Science and Engineering, Computer Science and Logistics Engineering, Sensors and the Internet, Computer Science and Logistics Engineering, Engineering and Management, Mechanical Science and Engineering.

Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. - Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties - Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance - Explores the manufacturing process for light alloys including metal forming processes for automotive applications

Download or read book Material and Manufacturing Technology II written by Gui Ping Liu and published by Trans Tech Publications Ltd. This book was released on 2011-09-27 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). These proceedings contain the fully refereed papers which were presented at the 2nd International Conference on Materials and Manufacturing Technology (ICMMT 2011) held during July 8-10, 2011 in Xiamen, China. The main goal of the event was to provide an international scientific forum for the exchange of new ideas in a number of fields, and to facilitate in-depth discussions with peers all over the world. Core areas of materials and manufacturing technology, as well as multidisciplinary, interdisciplinary and future applications are covered; thus providing a timely guide to the entire field.