Download or read book Material Concepts in Surface Reactivity and Catalysis written by Henry Wise and published by Elsevier. This book was released on 2012-12-02 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material Concepts in Surface Reactivity and Catalysis focuses on the physical and chemical properties of the surface in a reacting system, identifying surface properties that influence interfacial reactions in metal and nonmetal systems. This book discusses the bulk and surface imperfections, surface energy of multicomponent systems, adsorption isotherms and isosteres, and Lennard-Jones potential curves. The adsorbate-induced surface reconstruction, metal-support reactions, defect thermodynamics, and defect metal oxides with crystallographic shear structures are also elaborated. This text likewise covers the metal oxide catalysis, component segregation at grain boundaries, diffusion-controlled metal oxidation, and kinetics of metal deposition. This publication is useful to students in materials science, solid-state chemistry, and catalysis, as well as specialists engaged in research.

Download or read book Characterization of Solid Materials and Heterogeneous Catalysts 2 Volume Set written by Michel Che and published by John Wiley & Sons. This book was released on 2012-05-14 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book provides an overview of physical techniques used to characterize the structure of solid materials, on the one hand, and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book. After the preface and a general introduction to physical techniques by M. Che and J.C. Vedrine, two overviews on physical techniques are presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively. The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/ or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes, with its advantages and disadvantages, conclusions.

Download or read book New Materials for Catalytic Applications written by Vasile I. Parvulescu and published by Elsevier. This book was released on 2016-01-28 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials for Catalytic Applications proposes the use of both new and existing materials for catalytic applications, such as zeolites, metal oxides, microporous and mesoporous materials, and monocrystals. In addition, metal-oxides are discussed from a new perspective, i.e. nano- and photocatalytic applications. The material presents these concepts with a new focus on strategies in synthesis, synthesis based on a rational design, the correlation between basic properties/potential applications, and new catalytic solutions for acid-base, redox, hydrogenation, photocatalytic reactions, etc. Presents organometallic concepts for the synthesis of nanocatalysts Provides a synthesis of new materials following the fluorolytic sol-gel concept Covers electronic and photocatalytic properties via synthesis of nano-oxide materials Details the nature of sites in MOFs generating catalytic properties immobilization of triflates in solid matrices for organic reactions

Download or read book Introduction to Surface Chemistry and Catalysis written by Gabor A. Somorjai and published by John Wiley & Sons. This book was released on 2010-06-08 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now updated-the current state of development of modern surface science Since the publication of the first edition of this book, molecular surface chemistry and catalysis science have developed rapidly and expanded into fields where atomic scale and molecular information were previously not available. This revised edition of Introduction to Surface Chemistry and Catalysis reflects this increase of information in virtually every chapter. It emphasizes the modern concepts of surface chemistry and catalysis uncovered by breakthroughs in molecular-level studies of surfaces over the past three decades while serving as a reference source for data and concepts related to properties of surfaces and interfaces. The book opens with a brief history of the evolution of surface chemistry and reviews the nature of various surfaces and interfaces encountered in everyday life. New research in two crucial areas-nanomaterials and polymer and biopolymer interfaces-is emphasized, while important applications in tribology and catalysis, producing chemicals and fuels with high turnover and selectivity, are addressed. The basic concepts surrounding various properties of surfaces such as structure, thermodynamics, dynamics, electrical properties, and surface chemical bonds are presented. The techniques of atomic and molecular scale studies of surfaces are listed with references to up-to-date review papers. For advanced readers, this book covers recent developments in in-situ surface analysis such as high- pressure scanning tunneling microscopy, ambient pressure X-ray photoelectron spectroscopy, and sum frequency generation vibrational spectroscopy (SFG). Tables listing surface structures and data summarizing the kinetics of catalytic reactions over metal surfaces are also included. New to this edition: A discussion of new physical and chemical properties of nanoparticles Ways to utilize new surface science techniques to study properties of polymers, reaction intermediates, and mobility of atoms and molecules at surfaces Molecular-level studies on the origin of the selectivity for several catalytic reactions A microscopic understanding of mechanical properties of surfaces Updated tables of experimental data A new chapter on "soft" surfaces, polymers, and biointerfaces Introduction to Surface Chemistry and Catalysis serves as a textbook for undergraduate and graduate students taking advanced courses in physics, chemistry, engineering, and materials science, as well as researchers in surface science, catalysis science, and their applications.

Download or read book Characterization of Solid Materials and Heterogeneous Catalysts 2 Volume Set written by Michel Che and published by Wiley-VCH. This book was released on 2012-05-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book provides an overview of physical techniques used to characterize the structure of solid materials, on the one hand, and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book. After the preface and a general introduction to physical techniques by M. Che and J.C. Vedrine, two overviews on physical techniques are presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively. The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/ or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes, with its advantages and disadvantages, conclusions.

Download or read book Concepts of Modern Catalysis and Kinetics written by I. Chorkendorff and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now, the literature has offered a rather limited approach to the use of fundamental kinetics and their application to catalytic reactions. Subsequently, this book spans the full range from fundamentals of kinetics and heterogeneous catalysis via modern experimental and theoretical results of model studies to their equivalent large-scale industrial production processes. The result is key knowledge for students at technical universities and professionals already working in industry. '... such an enterprise will be of great value to the community, to professionals as well as graduate and undergraduate students attempting to move into the field of modern catalysis and kinetics. I strongly recommend you publish this book based on the proposal.' - Prof. Dr. G. A. Samorjai, University of California 'Both authors are well respected specialists, with a very long record of original top-quality work and an international reputation. A book from these authors will be considered an authoritative piece of work, I definitely support this project and I am looking forward to use the book when published.' - Prof. Dr. D. E. Resasco, University of Oklahoma 'I wholly support the proposed project. The authors are very competent young colleagues and there is a real need for such a textbook' - Prof. Dr. G. Ertl, Fritz-Haber-Institut, Max-Planck-Gesellschaft, Berlin

Download or read book Catalysis by Materials with Well Defined Structures written by Zili Wu and published by Academic Press. This book was released on 2015-03-26 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis by Materials with Well-Defined Structures examines the latest developments in the use of model systems in fundamental catalytic science. A team of prominent experts provides authoritative, first-hand information, helping readers better understand heterogeneous catalysis by utilizing model catalysts based on uniformly nanostructured materials. The text addresses topics and issues related to material synthesis, characterization, catalytic reactions, surface chemistry, mechanism, and theoretical modeling, and features a comprehensive review of recent advances in catalytic studies on nanomaterials with well-defined structures, including nanoshaped metals and metal oxides, nanoclusters, and single sites in the areas of heterogeneous thermal catalysis, photocatalysis, and electrocatalysis. Users will find this book to be an invaluable, authoritative source of information for both the surface scientist and the catalysis practitioner Outlines the importance of nanomaterials and their potential as catalysts Provides detailed information on synthesis and characterization of nanomaterials with well-defined structures, relating surface activity to catalytic activity Details how to establish the structure-catalysis relationship and how to reveal the surface chemistry and surface structure of catalysts Offers examples on various in situ characterization instrumental techniques Includes in-depth theoretical modeling utilizing advanced Density Functional Theory (DFT) methods

Download or read book Surface Science written by Kurt W. Kolasinski and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface chemistry is an essential and developing area of physical chemistry and one that has become increasingly interdisciplinary. The Second Edition of Surface Science: Foundations of Catalysis and Nanoscience has been fully revised and updated to reflect all the latest developments in the field and now includes an extensive discussion about nanoparticle growth and the quantum confinement effects in nanoscale systems. Two new chapters have been added and discuss The Liquid/Solid Interface and Non-Thermal Reactions, and Photon and Electron Stimulated Chemistry and Atom Manipulation. There are now many more worked examples included throughout to help students develop their problem-solving skills.

Download or read book Chemisorption and Reactivity on Supported Clusters and Thin Films written by R.M. Lambert and published by Springer Science & Business Media. This book was released on 1997-02-28 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous catalysis provides the backbone of the world's chemical and oil industries. The innate complexity of practical catalytic systems suggests that useful progress should be achievable by investigating key aspects of catalysis by experimental studies on idealised model systems. Thin films and supported clusters are two promising types of model system that can be used for this purpose, since they mimic important aspects of the properties of practical dispersed catalysts. Similarly, appropriate theoretical studies of chemisorption and surface reaction clusters or extended slab systems can provide valuable information on the factors that underlie bonding and catalytic activity. This volume describes such experimental and theoretical approaches to the surface chemistry and catalytic behaviour of metals, metal oxides and metal/metal oxide systems. An introduction to the principles and main themes of heterogeneous catalysis is followed by detailed accounts of the application of modern experimental and theoretical techniques to fundamental problems. The application of advanced experimental methods is complemented by a full description of theoretical procedures, including Hartree-Fock, density functional and similar techniques. The relative merits of the various approaches are considered and directions for future progress are indicated.

Download or read book Poisoning and Promotion in Catalysis based on Surface Science Concepts and Experiments written by M.P. Kiskinova and published by Elsevier. This book was released on 1991-11-29 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics covered in this book include a variety of adsorption and model reaction studies on clean and modified single crystal metal surfaces obtained by means of properly selected surface sensitive techniques. The accent is on the revelation of the physics and chemistry involved in the effects of various modifiers on the adsorptive and reactivity properties of the surface with respect to different reactants. In this book current information that contributes to the fundamental understanding of the effect of additives is summarized. Some of the additives act as promoters, others as poisons, in a number of important catalytic reactions. A description of single- and double-component systems has been obtained by using surface-sensitive techniques, particularly suited for this purpose. For the benefit of the reader, a short summary of the main surface science techniques has been given in Chapter 2. Three general and interrelated topics are reviewed. The first concerns the interaction of electronegative (Cl, S, Se, C, N, O, P) and electropositive (alkali metals) atoms with metal surfaces (Chapter 4). The second topic covers the chemisorptive properties of metal surfaces modified by varying amounts of additives with respect to different reactants (CO, NO, N2, O2, H2, CO2, NH3, H2O and hydrocarbons) (Chapters 5 and 6). In particular the adsorption kinetics and energetics, and the electronic, structural and reactive properties of the coadsorbate systems are considered, whereby particular attention is given to recent surface science studies with well-characterized, single crystal, metal surfaces. In these chapters, special attention is paid to showing the contribution of different factors (the nature and adsorption state of the modifier and the coadsorbed molecule, the structure of the adsorbed layer, the type of interactions in the mixed overlayers, etc.) to the modifier effects. In the discussion of the third topic, model studies of several important catalytic reactions (Fischer-Tropsch synthesis, ammonia synthesis, CO oxidation, water-gas shift synthesis) on modified metal surfaces (Chapter 8) are considered. The book will be particularly useful to scientists who are interested in adsorption phenomena, surface properties and catalysis. It should also prove invaluable to those addressing the questions of condensed matter (surfaces and interfaces), materials science (e.g. corrosion of metals) and electrochemistry.

Download or read book Concepts of Modern Catalysis and Kinetics written by I. Chorkendorff and published by John Wiley & Sons. This book was released on 2017-05-30 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past 12 years since its publication, Concepts of Modern Catalysis and Kinetics has become a standard textbook for graduate students at universities worldwide. Emphasizing fundamentals from thermodynamics, physical chemistry, spectroscopy, solid state chemistry and quantum chemistry, it introduces catalysis from a molecular perspective, and stresses how it is interwoven with the field of reaction kinetics. The authors go on to explain how the world of reacting molecules is connected to the real world of industry, by discussing the various scales (nano - micro - macro) that play a role in catalysis. Reflecting the modern-day focus on energy supplies, this third edition devotes attention to such processes as gas-to-liquids, coal-to-liquids, biomass conversion and hydrogen production. From reviews of the prior editions: 'Overall, this is a valuable book that I will use in teaching undergraduates and postgraduates.' (Angewandte Chemie - I. E.) '...this excellent book is highly recommended to students at technical universities, but also entrants in chemical industry. Furthermore, this informative handbook is also a must for all professionals in the community.' (AFS) 'I am impressed by the coverage of the book and it is a valuable addition to the catalysis literature and I highly recommend purchase' (Energy Sources)

Download or read book Zeolites and Mesoporous Materials at the Dawn of the 21st Century written by A. Galarneau and published by Elsevier. This book was released on 2001-08-13 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Zeolites and Mesporous Materials at the Dawn of the 21st Century Proceedings are the expression of the oral and poster communications which where presented during the 13th International Zeolite Conference (IZC). They are subdivided into 32 thematic sessions starting from the genesis of materials to their applications through their characterisation. The paper volume contains the full texts of the 5 plenary and 6 keynote lectures and informative summaries of 150 oral and 540 poster presentations. These contributions have been selected among the 903 submissions received from a total of 57 countries! In order to gather all the communications in a handy document, the full texts of oral and poster presentations are available in CD-ROM. Besides the fields of zeolite science always represented at IZC (synthesis, characterisation, catalysis, etc¿), some subjects strengthened their position (mesoporous materials, theory and modelling), new areas emerge (advanced materials, environmental and life sciences) and older ones regain interest (natural zeolites). The understanding and development of the unique properties of porous materials relies on a unique blend of multidisciplinary knowledge: material science, with the implication of organic and colloid chemistry, to prepare micro- and mesoporous materials, surface and adsorption science sustained by theory and modelling to understand the peculiar behaviour of molecules in confined systems, special branches of catalysis, physics, chemical engineering and life science to design novel applications. The gathering of these elements is at the basis of a fruitful and evolutionary zeolite science, as it is hopefully reflected by these proceedings.

Download or read book Catalyst materials properties written by Femina Patel and published by GRIN Verlag. This book was released on 2014-07-01 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: Document from the year 2014 in the subject Engineering - Chemical Engineering, Nirma University (Institute of Technology, Nirma University, Ahmedabad, Gujarat), course: Chemical Engineering, language: English, abstract: Catalysis has made a rapid progress and there can be observed many new applications of catalysts. Heterogeneous and homogeneous catalysts used commercially are chemically and physically complex, sophisticated materials and because of the chemical and physical complexity of catalysts, catalyst research and development is highly multidisciplinary field which require knowledge of chemistry, chemical engineering, material science and physics. In order to design, develop and prepare new catalysts, a process which requires detailed knowledge of catalyst material, catalyst properties and art/science of catalyst preparation. The main objective of this book is to present an overview on catalyst materials and properties so that both the student and the experienced practitioner can understand the concept of catalyst materials and properties.

Download or read book Surface Science written by John Hudson and published by Elsevier. This book was released on 2013-10-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The whole field of surface science is covered in this work. Starting with a description of the structure and thermodynamics of clean surfaces, the book goes on to discuss kinetic theory of gases and molecular beam formation. This is followed by a large section on gas-surface interactions, and another major section on energetic particle-surface interactions. The final chapter provides the background to crystal nucleation and growth. The approach adopted is interdisciplinary and slanted towards the experimental side, with practical analytical techniques being used to illustrate general principles.

Download or read book Bridging Heterogeneous and Homogeneous Catalysis written by Can Li and published by John Wiley & Sons. This book was released on 2014-04-03 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are two main disciplines in catalysis research -- homogeneous and heterogeneous catalysis. This is due to the fact that the catalyst is either in the same phase (homogeneous catalysis) as the reaction being catalyzed or in a different phase (heterogeneous catalysis). Over the past decade, various approaches have been implemented to combine the advantages of homogeneous catalysis (efficiency, selectivity) with those of heterogeneous catalysis (stability, recovery) by the heterogenization of homogeneous catalysts or by carrying out homogeneous reactions under heterogeneous conditions. This unique handbook fills the gap in the market for an up-to-date work that links both homogeneous catalysis applied to organic reactions and catalytic reactions on surfaces of heterogeneous catalysts. As such, it highlights structural analogies and shows mechanistic parallels between the two, while additionally presenting kinetic analysis methods and models that either work for both homogeneous and heterogeneous catalysis. Chapters cover asymmetric, emulsion, phase-transfer, supported homogeneous, and organocatalysis, as well as in nanoreactors and for specific applications, catalytic reactions in ionic liquids, fluorous and supercritical solvents and in water. Finally, the text includes computational methods for investigating structure-reactivity relations. With its wealth of information, this invaluable reference provides academic and industrial chemists with novel concepts for innovative catalysis research.

Download or read book Heterogeneous Catalytic Materials written by Guido Busca and published by Newnes. This book was released on 2014-05-23 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous Catalytic Materials discusses experimental methods and the latest developments in three areas of research: heterogeneous catalysis; surface chemistry; and the chemistry of catalysts. Catalytic materials are those solids that allow the chemical reaction to occur efficiently and cost-effectively. This book provides you with all necessary information to synthesize, characterize, and relate the properties of a catalyst to its behavior, enabling you to select the appropriate catalyst for the process and reactor system. Oxides (used both as catalysts and as supports for catalysts), mixed and complex oxides and salts, halides, sulfides, carbides, and unsupported and supported metals are all considered. The book encompasses applications in industrial chemistry, refinery, petrochemistry, biomass conversion, energy production, and environmental protection technologies. Provides a systematic and clear approach of the synthesis, solid state chemistry and surface chemistry of all solid state catalysts Covers widely used instrumental techniques for catalyst characterization, such as x-ray photoelectron spectroscopy, scanning electron microscopy, and more Includes characterization methods and lists all catalytic behavior of the solid state catalysts Discusses new developments in nanocatalysts and their advantages over conventional catalysts

Download or read book Structure and Reactivity of Metals in Zeolite Materials written by Joaquín Pérez Pariente and published by Springer. This book was released on 2018-09-12 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides the reader with the most up-to-date and relevant knowledge on the reactivity of metals located in zeolite materials, either in framework or extra-framework positions, and the way it is connected with the nature of the chemical environment provided by the host. Since the first report of the isomorphous substitution of titanium in the framework of zeolites giving rise to materials with unusual catalytic properties, the incorporation of many other metals have been investigated with the aim for developing catalysts with improved performance in different reactions. The continuous expansion of the field, both in the variety of metals and zeolite structures, has been accompanied by an increasing focus on the relationship between the reactivity of metal centers and their unique chemical environment. The concepts covered in this volume are of interest to people working in the field of inorganic and physical chemistry, catalysis and chemical engineering, but also for those more interested in theoretical approaches to chemical reactivity. In particular the volume is useful to postgraduate students conducting research in the design, synthesis and catalytic performance of metal-containing zeolites in both academic and application contexts.