Download or read book Martensitic Nature of delta yields gamma Allotropic Transformation in Plutonium written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Isothermal and isoplethal studies using differential scanning calorimetry have been conducted to characterize the allotropic transformations of plutonium. The [delta]-[gamma] transformation (upon cooling) was observed to have a classic martensitic nature. The work described herein is the first quantitative study of this phenomena in plutonium.
Download or read book Martensitic Nature of delta 2 gamma Allotropic Transformation in Plutonium written by and published by . This book was released on 1996 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: Isothermal and isoplethal studies using differential scanning calorimetry have been conducted to characterize the allotropic transformations of plutonium. The [delta]-[gamma] transformation (upon cooling) was observed to have a classic martensitic nature. The work described herein is the first quantitative study of this phenomena in plutonium.
Download or read book Complex Inorganic Solids written by Patrice E. A. Turchi and published by Springer Science & Business Media. This book was released on 2007-12-31 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the key aspects of this volume is to cut across the traditional taxonomy of disciplines in the study of alloys. Hence there has been a deliberate attempt to integrate the different approaches taken towards alloys as a class of materials in different fields, ranging from geology to metallurgical engineering. The emphasis of this book is to highlight commonalities between different fields with respect to how alloys are studied. The topics in this book fall into several themes, which suggest a number of different classification schemes. We have chosen a scheme that classifies the papers in the volume into the categories Microstructural Considerations, Ordering, Kinetics and Diffusion, Magnetic Considerations and Elastic Considerations. The book has juxtaposed apparently disparate approaches to similar physical processes, in the hope of revealing a more dynamic character of the processes under consideration. This monograph will invigorate new kinds of discussion and reveal challenges and new avenues to the description and prediction of properties of materials in the solid state and the conditions that produce them.
Download or read book Phase Transformations in Materials written by G. Kostorz and published by Wiley-VCH. This book was released on 2001-10-25 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).
Download or read book Introduction to Basic Manufacturing Processes and Workshop Technology written by Rajender Singh and published by New Age International. This book was released on 2006-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and workshop practices have become important in the industrial environment to produce products for the service of mankind. The basic need is to provide theoretical and practical knowledge of manufacturing processes and workshop technology to all the engineering students. This book covers most of the syllabus of manufacturing processes/technology, workshop technology and workshop practices for engineering (diploma and degree) classes prescribed by different universities and state technical boards.
Download or read book Crystalline Electric Field and Structural Effects in f Electron Systems written by Jack E. Crow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perhaps the title of this conference "Ctystalline Electric Field and Structural Effects in f-Electron Systems" reflects best the growth and direction of the field. The title and the conference itself go beyond "CEF" in two broad and important respects. First, the inter-relations between CEF and mode softenings, distortions due to quadruplar ordering or the Jahn Teller effect, have gained greater focus, hence the inclusion of . •• "Structral Effects. " Second, much greater emphasis on the actinides and, in particular, comparisons between actinides and the lighter rare earths is seen in this conference, hence the more general terminology . . . Iff-Electron Systems. " It seems clear that this comparison will lead to an extension to the actinides of mixed valence and Kondo considerations, as well as CEF effects. The emergence of a broader discipline which includes all f-electron systems and which is concerned with unstable, as well as stable, valence reflects the maturation of the field and a coming to grips with the complexity, as well as the unity, of f-electron systems. This maturation is also seen in the growing realization of the effects of CEF on transport, thermodynamic properties, and superconductivity and its co-existence with magnetic order. This volume contains 63 articles, all but two of which were presented at the Conference held in Philadelphia, U. S. A. , on 12-15 November, 1979. About 100 conferees from 13 countries attended the meeting which consisted of four full days of lecture presentations.
Download or read book Extraction of Nuclear and Non ferrous Metals written by Sujay Kumar Dutta and published by Springer. This book was released on 2017-11-24 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of non-ferrous metallurgy, especially its core principles and fundamental aspects, in a concise form. The book covers all basic concepts and definitions related to metal extraction, and provide succinct summaries of relevant metallurgical processes. It also covers the scientific and engineering aspects of nuclear processes and features special chapter on ultra-high-purity metals. The book employs a step-by-step approach, is written in an easy-to-understand style, and discusses significance of core concepts. As such, it not only offers a valuable guide for professionals and researchers working in the areas of metallurgy, mining, and chemical engineering, but can also be used as a core text in both graduate and professional coursework.
Download or read book Materials Handbook written by François Cardarelli and published by Springer Science & Business Media. This book was released on 2008-03-19 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique and practical book provides quick and easy access to data on the physical and chemical properties of all classes of materials. The second edition has been much expanded to include whole new families of materials while many of the existing families are broadened and refined with new material and up-to-date information. Particular emphasis is placed on the properties of common industrial materials in each class. Detailed appendices provide additional information, and careful indexing and a tabular format make the data quickly accessible. This book is an essential tool for any practitioner or academic working in materials or in engineering.
Download or read book Local Structure from Diffraction written by S.J.L. Billinge and published by Springer Science & Business Media. This book was released on 2006-02-04 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of books, which is published at the rate of about one per year, addresses fundamental problems in materials science. The contents cover a broad range of topics from small clusters of atoms to engineering materials and involve chemistry, physics, materials science and engineering, with length scales ranging from Ångstroms up to millimeters. The emphasis is on basic science rather than on applications. Each book focuses on a single area of current interest and brings together leading experts to give an up-to-date discussion of their work and the work of others. Each article contains enough references that the interested reader can access the relevant literature. Thanks are given to the Center for Fundamental Materials Research at Michigan State University for supporting this series. M.F. Thorpe, Series Editor E-mail: thorpe @ pa.msu.edu East Lansing, Michigan PREFACE One of the most challenging problems in the study of structure is to characterize the atomic short-range order in materials. Long-range order can be determined with a high degree of accuracy by analyzing Bragg peak positions and intensities in data from single crystals or powders. However, information about short-range order is contained in the diffuse scattering intensity. This is difficult to analyze because it is low in absolute intensity (though the integrated intensity may be significant) and widely spread in reciprocal space.
Download or read book Fundamentals of Materials Science written by Eric J. Mittemeijer and published by Springer Nature. This book was released on 2022-01-01 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers a strong introduction to the fundamental concepts of materials science. It conveys the quintessence of this interdisciplinary field, distinguishing it from merely solid-state physics and solid-state chemistry, using metals as model systems to elucidate the relation between microstructure and materials properties. Mittemeijer's Fundamentals of Materials Science provides a consistent treatment of the subject matter with a special focus on the microstructure-property relationship. Richly illustrated and thoroughly referenced, it is the ideal adoption for an entire undergraduate, and even graduate, course of study in materials science and engineering. It delivers a solid background against which more specialized texts can be studied, covering the necessary breadth of key topics such as crystallography, structure defects, phase equilibria and transformations, diffusion and kinetics, and mechanical properties. The success of the first edition has led to this updated and extended second edition, featuring detailed discussion of electron microscopy, supermicroscopy and diffraction methods, an extended treatment of diffusion in solids, and a separate chapter on phase transformation kinetics. “In a lucid and masterly manner, the ways in which the microstructure can affect a host of basic phenomena in metals are described.... By consistently staying with the postulated topic of the microstructure - property relationship, this book occupies a singular position within the broad spectrum of comparable materials science literature .... it will also be of permanent value as a reference book for background refreshing, not least because of its unique annotated intermezzi; an ambitious, remarkable work.” G. Petzow in International Journal of Materials Research. “The biggest strength of the book is the discussion of the structure-property relationships, which the author has accomplished admirably.... In a nutshell, the book should not be looked at as a quick ‘cook book’ type text, but as a serious, critical treatise for some significant time to come.” G.S. Upadhyaya in Science of Sintering. “The role of lattice defects in deformation processes is clearly illustrated using excellent diagrams . Included are many footnotes, ‘Intermezzos’, ‘Epilogues’ and asides within the text from the author’s experience. This ..... soon becomes valued for the interesting insights into the subject and shows the human side of its history. Overall this book provides a refreshing treatment of this important subject and should prove a useful addition to the existing text books available to undergraduate and graduate students and researchers in the field of materials science.” M. Davies in Materials World.
Download or read book Introduction to Physical Metallurgy written by Sidney Avner and published by . This book was released on 1990-06-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Chemistry written by Bradley D. Fahlman and published by Springer. This book was released on 2018-08-28 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook continues to build on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field — in a concise format. The 3rd edition offers significant updates throughout, with expanded sections on sustainability, energy storage, metal-organic frameworks, solid electrolytes, solvothermal/microwave syntheses, integrated circuits, and nanotoxicity. Most appropriate for Junior/Senior undergraduate students, as well as first-year graduate students in chemistry, physics, or engineering fields, Materials Chemistry may also serve as a valuable reference to industrial researchers. Each chapter concludes with a section that describes important materials applications, and an updated list of thought-provoking questions.
Download or read book IRON Binary Phase Diagrams written by O. Kubaschewski and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the official dinner of a· meeting in May 1939, I was seated next to Max Hansen. When I congratulated him on the well deserved success of his "Aufbau der Zweistoff-Legierungen", he smiled: "yes, it was a struggle with the hydra, and so it has taken me seven years", meaning that whenever he had thought to have finished the phase diagram of a particular system, new evidence would turn up like the new heads of the Greek monster. There is no need to point out the importance of assessed phase diagrams to metallurgists or even anyone concerned with the technology and applica tion of metals and alloys. The information contained therein is fundamental to considerations concerning the chemical, physical and mechanical properties of alloys. Hansen's German monograph was followed by a revised English edition in 1958 with K. Anderko and the supplements by R.P. Elliott (1965) and F.A. Shunk (1969). All those who have made use of these volumes will admit that much diligent labour has gone into this work, necessary to cope with the ever increasing number of publications and the consequent improvements.
Download or read book Ceramic Materials written by Philippe Boch and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily an introduction to the vast family of ceramic materials. The first part is devoted to the basics of ceramics and processes: raw materials, powders synthesis, shaping and sintering. It discusses traditional ceramics as well as “technical” ceramics – both oxide and non-oxide – which have multiple developments. The second part focuses on properties and applications, and discusses both structural and functional ceramics, including bioceramics. The fields of abrasion, cutting and tribology illustrate the importance of mechanical properties. It also deals with the questions/answers of a ceramicist regarding electronuclear technology. As chemistry is an essential discipline for ceramicists, the book shows, in particular, what soft chemistry can contribute as a result of sol-gel methods.
Download or read book Structural Materials written by José Antonio Pero-Sanz Elorz and published by Springer Nature. This book was released on 2019-09-25 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the most important materials (naturals, metals, ceramics, polymers and composites) to be used mainly as structural engineering materials. Their main applications based on the properties are described in the first chapters of the book: mechanical, physical and chemical. The second part of the book is dedicated to the conceptual design by properties for a certain structural application: stiffness, mechanical strength, toughness, fatigue resistance, creep, etc., taking into account the weight and the cost. One of the chapters of the second part of the book is focused on the heat treatments of steels in order to improve their resistance to fatigue. The book concludes with a critical comparison between materials considering their production, properties and cost, and the forecast about the utilization of the different fields of materials in structural applications.
Download or read book Constitution of Binary Alloys written by Max Hansen and published by McGraw-Hill Companies. This book was released on 1969 with total page 1332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anagram Solver written by Bloomsbury Publishing and published by Bloomsbury Publishing. This book was released on 2009-01-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anagram Solver is the essential guide to cracking all types of quiz and crossword featuring anagrams. Containing over 200,000 words and phrases, Anagram Solver includes plural noun forms, palindromes, idioms, first names and all parts of speech. Anagrams are grouped by the number of letters they contain with the letters set out in alphabetical order so that once the letters of an anagram are arranged alphabetically, finding the solution is as easy as locating the word in a dictionary.
