Download or read book Maraging Steels written by W Sha and published by Elsevier. This book was released on 2009-10-26 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels.Maraging steels: modelling of microstructure, properties and applications covers the following topics: Introduction to maraging steels; Microstructure of maraging steels; Mechanical properties of maraging steels; Thermodynamic calculations for quantifying the phase fraction and element partition in maraging systems and precipitation hardening steels; Quantification of phase transformation kinetics in maraging steels; Quantification of age hardening in maraging steels; Maraging steels and overageing; Precipitation hardening stainless steel; Applications of artificial neural network on modelling maraging steel properties.With its distinguished authors, Maraging steels: modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with maraging steels and modelling as well as users of maraging steels in the aerospace and tooling sectors. The book includes both conventional maraging steels and precipitation hardened (PH) stainless steels. Provides an overview of maraging steels including microstructure and mechanical properties Reviews thermodynamic calculations for quantifying the phase fraction and element partition in maraging steels Includes chapters on the quantification of phase transformation kinetics and age hardening in maraging steels
Download or read book Introduction to Today s Ultrahigh strength Structural Steels written by Albert M. Hall and published by ASTM International. This book was released on 1971 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Metallurgy Behavior and Application of the 18 percent Nickel Maraging Steels A Survey written by A. M. Hall and published by . This book was released on 1968 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report resulted from a survey of users and manufacturers of maraging steels, Government agencies, research institutions, and published literature. It presents the technical status of the 18-percent nickel maraging steels in detail and brings together a large body of knowledge with regard to the metallurgical and engineering aspects of maraging steels. Since such steels were first announced in 1959, they have become highly important in aerospace, defense, and industrial work. The requirements of the National Aeronautics and Space Administration have given impetus to their development, and research now underway is expected to result in further improvements and applicability. The NASA Office of Technology Utilization sponsored this report as part of its program to disseminate information on technological developments which appear to be useful for general industrial applications.
Download or read book Report on the Fourth Maraging steel Project Review written by Albert M. Hall and published by . This book was released on 1964 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Steels written by P.C. Angelo and published by CRC Press. This book was released on 2019-03-20 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book briefly describes the structure, properties and applications of various grades of steel, primarily aimed at non-metallurgical students from other engineering streams. The book consists of nine chapters covering most of the important types of steels and their physical metallurgy, microstructure and engineering applications including iron-carbon diagram, heat treatment, surface hardening methods, effect of alloying, specific applications, selection of materials, case studies and so forth. The book also contains subjective and objective questions aimed at exam preparation. Key Features Exclusive title aimed at introduction to steels for non-metallurgy audience Includes microstructure, composition, and properties of all the most commonly used steels Describes the heat treatments and the required alloying additions to process steel for the intended applications Discusses effects of alloying elements on steel Explores development of steels for specialized areas such as the automobile, aerospace, and nuclear industries
Download or read book Source Book on Maraging Steels written by Raymond Frank Decker and published by ASM International(OH). This book was released on 1979 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Mechanical Properties of the 18 Per Cent Nickel Maraging Steels written by J. E. Campbell and published by . This book was released on 1964 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the combination of tensile properties and toughness that can be obtained with the maraging steels is higher than can be achieved with other steels by simple heat treatments, there is considerable interest in using the maraging steels for critical components such as rocket motor cases, pressure vessels, and aircraft forgings. This report includes information on the tensile, compressive, shear, bearing, dynamic modulus, impact, bend, fatigue, creep, and rupture properties of the 18 per cent nickel maraging steels and on the effect of temperature on these properties. Data for the properties of sheet, bar, and forgings, as well as data illustrating the effect of cold rolling, variation in the heat treatment, and elevated-temperature exposure also are presented. Data on the effect of specimen orientation, which are also included, indicate that the ductility and toughness of specimens designed to evaluate the properties in the short transverse direction are somewhat lower than in the other directions. The high strength and toughness that can be obtained in the 18 per cent nickel maraging steels make them attractive for certain critical applications that require these properties. The fabrication characteristics, weldability, and simple heat treatment are other advantages of these steels. (Author).
Download or read book Steels written by Wei Sha and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels and computer-based modelling are fast growing fields in materials science as well as structural engineering, demonstrated by the large amount of recent literature. Steels: From Materials Science to Structural Engineering combines steels research and model development, including the application of modelling techniques in steels. The latest research includes structural engineering modelling, and novel, prototype alloy steels such as heat-resistant steel, nitride-strengthened ferritic/martensitic steel and low nickel maraging steel. Researchers studying steels will find the topics vital to their work. Materials experts will be able to learn about steels used in structural engineering as well as modelling and apply this increasingly important technique in their steel materials research and development.
Download or read book Report on Meeting to Review Maraging Steel Projects written by Albert M. Hall and published by . This book was released on 1962 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report on the Third Maraging Steel Project Review written by Albert M. Hall and published by . This book was released on 1963 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1965 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Specialty Steels and Hard Materials written by N. R. Comins and published by Elsevier. This book was released on 2013-09-24 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specialty Steels and Hard Materials covers the proceedings of the International Conference on Recent Developments in Specialty Steels and Hard Materials (Materials Development '82). The main focus of the materials in the selection is on the microstructural detail, alloy design, processing technology, applications, and economic viability. The first part of the title presents the invited papers in the conference; this part includes topics such as toughness in high speed steels and hard metals; the use of vanadium in low alloy structural steels; and design of strong, ductile, duplex low alloy steels. The second part of the text covers topics about high strength low alloy steels, stainless steels, and rapid solidification processing. The last part of selection deals with tungsten carbide-cobalt hard metals, non-oxide ceramics, and sintered polycrystalline ultra-hard materials. The book will be of great interest to students, researchers, and practitioners of materials engineering and metallurgy.
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 2 reviews current research on diffusionless transformations and phase transformations in high strength steels, as well as advances in modelling and analytical techniques which underpin this research. Chapters in part one discuss the crystallography and kinetics of martensite transformations, the morphology, substructure and tempering of martensite as well as shape memory in ferrous alloys. Part two summarises research on phase transformations in high strength low alloy (HSLA) steels, transformation induced plasticity (TRIP)-assisted multiphase steels, quenched and partitioned steels, advanced nanostructured bainitic steels, high manganese twinning induced plasticity (TWIP) and maraging steels. The final two parts of the book review advances in modelling and the use of advanced analytical techniques to improve our understanding of phase transformations in steels.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. Alongside its companion volume, this major two-volume work summarises the current state of research on phase transformations in steels Reviews research on diffusionless transformations and phase transformations in high strength steels Examines advances in modelling and the use of advanced analytical techniques to improve understanding of phase transformations in steels
Download or read book Physical Metallurgy and Advanced Materials written by R. E. Smallman and published by Elsevier. This book was released on 2011-02-24 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Metallurgy and Advanced Materials is the latest edition of the classic book previously published as Modern Physical Metallurgy and Materials Engineering. Fully revised and expanded, this new edition is developed from its predecessor by including detailed coverage of the latest topics in metallurgy and material science. It emphasizes the science, production and applications of engineering materials and is suitable for all post-introductory materials science courses. This book provides coverage of new materials characterization techniques, including scanning tunneling microscopy (STM), atomic force microscopy (AFM), and nanoindentation. It also boasts an updated coverage of sports materials, biomaterials and nanomaterials. Other topics range from atoms and atomic arrangements to phase equilibria and structure; crystal defects; characterization and analysis of materials; and physical and mechanical properties of materials. The chapters also examine the properties of materials such as advanced alloys, ceramics, glass, polymers, plastics, and composites. The text is easy to navigate with contents split into logical groupings: fundamentals, metals and alloys, nonmetals, processing and applications. It includes detailed worked examples with real-world applications, along with a rich pedagogy comprised of extensive homework exercises, lecture slides and full online solutions manual (coming). Each chapter ends with a set of questions to enable readers to apply the scientific concepts presented, as well as to emphasize important material properties. Physical Metallurgy and Advanced Materials is intended for senior undergraduates and graduate students taking courses in metallurgy, materials science, physical metallurgy, mechanical engineering, biomedical engineering, physics, manufacturing engineering and related courses. Renowned coverage of metals and alloys, plus other materials classes including ceramics and polymers. Updated coverage of sports materials, biomaterials and nanomaterials. Covers new materials characterization techniques, including scanning tunneling microscopy (STM), atomic force microscopy (AFM), and nanoindentation. Easy to navigate with contents split into logical groupings: fundamentals, metals and alloys, nonmetals, processing and applications. Detailed worked examples with real-world applications. Rich pedagogy includes extensive homework exercises.
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1997-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials covered include carbon, alloy and stainless steels; alloy cast irons; high-alloy cast steels; superalloys; titanium and titanium alloys; refractory metals and alloys; nickel-chromium and nickel-thoria alloys; structural intermetallics; structural ceramics, cermets, and cemented carbides; and carbon-composites.
Download or read book Aerospace Structural Metals Handbook written by and published by . This book was released on 1989 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Toughness of High strength Steels for Military Applications written by J. E. Campbell and published by . This book was released on 1968 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Memorandum discusses the current situation on the inclusion of fracture-toughness testing requirements in specifications for high-strength steels used for military applications. The Memorandum was prepared at the request of The Technical Cooperation Program (TTCP), and contains information from Canadian and British members of that program, as well as U.S. information. Military applications discussed include missile motor cases, aircraft landing gear, gun tubes, armor plate, and hydrofoils. (Author).
