Download or read book Map Projection Transformation written by Qihe Yang and published by CRC Press. This book was released on 2020-11-26 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advance of science and technology, there have been breakthroughs in the field of classical research and methods of map projection. Among these, computer science and space science have had the greater influence upon the field of research and the formation of a working body of map projection, developing them in breadth and depth. This book reflects several aspects of the development of modern mathematical cartography, especially the theory and methods of map projection transformation. Map projection transformation is an area of research in mathematical cartography newly developed over the last 25 years. It is widely used in surveying and computer-assisted cartography, data processing for information systems, and the transformation of data from space, remote sensing, and other space sciences. The development of map projection transformation not only expands new areas of research on mathematical cartography, but it also further develops the applied area with the creation and application of map projection transformation software and mapping mathematics bases on the computer.
Download or read book Coordinate Systems and Map Projections written by D.H. Maling and published by Elsevier. This book was released on 2013-10-22 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and expanded new edition of the definitive English work on map projections. The revisions take into account the huge advances in geometrical geodesy which have occurred since the early years of satellite geodesy. The detailed configuration of the geoid resulting from the GEOS and SEASAT altimetry measurements are now taken into consideration. Additionally, the chapter on computation of map projections is updated bearing in mind the availability of pocket calculators and microcomputers. Analytical derivation of some map projections including examples of pseudocylindrical and polyconic projections is also covered. Work undertaken in the USA and USSR on the creation of suitable map projections obtained through numerical analysis has been included. The book concludes with a chapter on the abuse and misrepresentation of map projections. An invaluable reference source for professional cartographers and all those interested in the fundamental problems of mapping the Earth.
Download or read book Map ProjectionsTheory and Applications written by Frederick Pearson, II and published by CRC Press. This book was released on 1990-03-28 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Author: Frederick Pearson has extensive experience in teaching map projection at the Air Force Cartography School and Virginia Polytechnic Institute. He developed star charts, satellite trajectory programs, and a celestial navigation device for the Aeronautical Chart and Information Center. He is an expert in orbital analysis of satellites, and control and guidance systems. At McDonnell-Douglas, he worked on the guidance system for the space shuttle. This text develops the plotting equations for the major map projections. The emphasis is on obtaining usable algorithms for computed aided plotting and CRT display. The problem of map projection is stated, and the basic terminology is introduced. The required fundamental mathematics is reviewed, and transformation theory is developed. Theories from differential geometry are particularized for the transformation from a sphere or spheroid as the model of the earth onto a selected plotting surface. The most current parameters to describe the figure of the earth are given. Formulas are included to calculate meridian length, parallel length, geodetic and geocentric latitude, azimuth, and distances on the sphere or spheroid. Equal area, conformal, and conventional projection transformations are derived. All result in direct transformation from geographic to cartesian coordinates. For selected projections, inverse transformations from cartesian to geographic coordinates are given. Since the avoidance of distortion is important, the theory of distortion is explored. Formulas are developed to give a quantitative estimate of linear, area, and angular distortions. Extended examples are given for several mapping problems of interest. Computer applications, and efficient algorithms are presented. This book is an appropriate text for a course in the mathematical aspects of mapping and cartography. Map projections are of interest to workers in many fields. Some of these are mathematicians, engineers, surveyors, geodicests, geographers, astronomers, and military intelligence analysts and strategists.
Download or read book Understanding Map Projections written by Melita Kennedy and published by ESRI Press. This book was released on 2000 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geocomputation with R written by Robin Lovelace and published by CRC Press. This book was released on 2019-03-22 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geocomputation with R is for people who want to analyze, visualize and model geographic data with open source software. It is based on R, a statistical programming language that has powerful data processing, visualization, and geospatial capabilities. The book equips you with the knowledge and skills to tackle a wide range of issues manifested in geographic data, including those with scientific, societal, and environmental implications. This book will interest people from many backgrounds, especially Geographic Information Systems (GIS) users interested in applying their domain-specific knowledge in a powerful open source language for data science, and R users interested in extending their skills to handle spatial data. The book is divided into three parts: (I) Foundations, aimed at getting you up-to-speed with geographic data in R, (II) extensions, which covers advanced techniques, and (III) applications to real-world problems. The chapters cover progressively more advanced topics, with early chapters providing strong foundations on which the later chapters build. Part I describes the nature of spatial datasets in R and methods for manipulating them. It also covers geographic data import/export and transforming coordinate reference systems. Part II represents methods that build on these foundations. It covers advanced map making (including web mapping), "bridges" to GIS, sharing reproducible code, and how to do cross-validation in the presence of spatial autocorrelation. Part III applies the knowledge gained to tackle real-world problems, including representing and modeling transport systems, finding optimal locations for stores or services, and ecological modeling. Exercises at the end of each chapter give you the skills needed to tackle a range of geospatial problems. Solutions for each chapter and supplementary materials providing extended examples are available at https://geocompr.github.io/geocompkg/articles/. Dr. Robin Lovelace is a University Academic Fellow at the University of Leeds, where he has taught R for geographic research over many years, with a focus on transport systems. Dr. Jakub Nowosad is an Assistant Professor in the Department of Geoinformation at the Adam Mickiewicz University in Poznan, where his focus is on the analysis of large datasets to understand environmental processes. Dr. Jannes Muenchow is a Postdoctoral Researcher in the GIScience Department at the University of Jena, where he develops and teaches a range of geographic methods, with a focus on ecological modeling, statistical geocomputing, and predictive mapping. All three are active developers and work on a number of R packages, including stplanr, sabre, and RQGIS.
Download or read book Map Projections written by L M Bugayevskiy and published by CRC Press. This book was released on 2013-12-19 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Map projection concerns the science of mathematical cartography, the techniques by which the Earth's dimensions, shape and features are translated in map form, be that two-dimensional paper or two- or three- dimensional electronic representations. The central focus of this book is on the theory of map projections. Mathematical cartography also take
Download or read book Choosing a Map Projection written by Miljenko Lapaine and published by Springer. This book was released on 2017-04-04 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a much-needed critical approach to the intelligent use of the wide variety of map projections that are rapidly and inexpensively available today. It also discusses the distortions that are immanent in any map projection. A well-chosen map projection is one in which extreme distortions are smaller than those in any other projection used to map the same area and in which the map properties match its purpose. Written by leading experts in the field, including W. Tobler, F.C. Kessler, S.E. Battersby, M.P. Finn, K.C. Clarke, V.S. Tikunov, H. Hargitai, B. Jenny and N. Frančula. This book is designed for use by laymen. The book editors are M. Lapaine and E.L. Usery, Chair and Vice-Chair, respectively, of the ICA Commission on Map Projections for the period 2011-2015.
Download or read book Small Scale Map Projection Design written by Frank Canters and published by CRC Press. This book was released on 2002-02-21 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of computers in cartography has made it easier for map makers to transform data from one map projection to another and experiment with alternative representations of geographical data. This has created new challenges and opportunities for map projection scientists. Small Scale Map Projection Design focuses on numerical map projection research and is written from the perspective of the map projection user. It demonstrates how advances in the measurement of map projection distortion and in the development of low error map projections can help map makers decide what type of map projection is best for their purpose, and shows how they can eventually design their own map projections.
Download or read book Datums and Map Projections for Remote Sensing GIS and Surveying written by Jonathan Iliffe and published by CRC Press. This book was released on 2000 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: New methods of acquiring spatial data and the advent of geographic information systems (GIS) for handling and manipulating data mean that we no longer must rely on paper maps from a single source, but can acquire, combine, and customize spatial data as needed. To ensure quality results, however, one must fully understand the diverse coordinate frameworks upon which the data are based. Datums and Map Projections provides clear, accessible explanations of the terminology, relationships, transformations, and computations involved in combining data from different sources. The first half of the book focuses on datums, exploring different coordinate systems and datums, including two- and three-dimensional representations of Earth coordinates and vertical datums. After an overview of the global positioning system (GPS), the author introduces the fundamentals of map projections and examines the different types. He then presents models and procedures for transforming directly between data sets. The final chapter presents case studies of projects that illustrate the types of problems often encountered in practice. Newcomers to the field will welcome this treatment that, instead of detailed mathematics, uses lucid explanations and numerous examples to unravel the complexities of the subject. For more experienced readers, the book is a valuable reference that answers specific questions and imparts a better understanding of transformation operations and principles. Features
Download or read book Map Projections written by Erik W. Grafarend and published by Springer Science & Business Media. This book was released on 2006-12-31 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative review of map projection
Download or read book Map ProjectionsTheory and Applications written by Frederick Pearson,II and published by Routledge. This book was released on 2018-04-27 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Author: Frederick Pearson has extensive experience in teaching map projection at the Air Force Cartography School and Virginia Polytechnic Institute. He developed star charts, satellite trajectory programs, and a celestial navigation device for the Aeronautical Chart and Information Center. He is an expert in orbital analysis of satellites, and control and guidance systems. At McDonnell-Douglas, he worked on the guidance system for the space shuttle. This text develops the plotting equations for the major map projections. The emphasis is on obtaining usable algorithms for computed aided plotting and CRT display. The problem of map projection is stated, and the basic terminology is introduced. The required fundamental mathematics is reviewed, and transformation theory is developed. Theories from differential geometry are particularized for the transformation from a sphere or spheroid as the model of the earth onto a selected plotting surface. The most current parameters to describe the figure of the earth are given. Formulas are included to calculate meridian length, parallel length, geodetic and geocentric latitude, azimuth, and distances on the sphere or spheroid. Equal area, conformal, and conventional projection transformations are derived. All result in direct transformation from geographic to cartesian coordinates. For selected projections, inverse transformations from cartesian to geographic coordinates are given. Since the avoidance of distortion is important, the theory of distortion is explored. Formulas are developed to give a quantitative estimate of linear, area, and angular distortions. Extended examples are given for several mapping problems of interest. Computer applications, and efficient algorithms are presented. This book is an appropriate text for a course in the mathematical aspects of mapping and cartography. Map projections are of interest to workers in many fields. Some of these are mathematicians, engineers, surveyors, geodi
Download or read book Rhumb Lines and Map Wars written by Mark Monmonier and published by University of Chicago Press. This book was released on 2010-11-15 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Rhumb Lines and Map Wars, Mark Monmonier offers an insightful, richly illustrated account of the controversies surrounding Flemish cartographer Gerard Mercator's legacy. He takes us back to 1569, when Mercator announced a clever method of portraying the earth on a flat surface, creating the first projection to take into account the earth's roundness. As Monmonier shows, mariners benefited most from Mercator's projection, which allowed for easy navigation of the high seas with rhumb lines—clear-cut routes with a constant compass bearing—for true direction. But the projection's popularity among nineteenth-century sailors led to its overuse—often in inappropriate, non-navigational ways—for wall maps, world atlases, and geopolitical propaganda. Because it distorts the proportionate size of countries, the Mercator map was criticized for inflating Europe and North America in a promotion of colonialism. In 1974, German historian Arno Peters proffered his own map, on which countries were ostensibly drawn in true proportion to one another. In the ensuing "map wars" of the 1970s and 1980s, these dueling projections vied for public support—with varying degrees of success. Widely acclaimed for his accessible, intelligent books on maps and mapping, Monmonier here examines the uses and limitations of one of cartography's most significant innovations. With informed skepticism, he offers insightful interpretations of why well-intentioned clerics and development advocates rallied around the Peters projection, which flagrantly distorted the shape of Third World nations; why journalists covering the controversy ignored alternative world maps and other key issues; and how a few postmodern writers defended the Peters worldview with a self-serving overstatement of the power of maps. Rhumb Lines and Map Wars is vintage Monmonier: historically rich, beautifully written, and fully engaged with the issues of our time.
Download or read book L177 Interactive General Map Projection Transformation written by Geological Survey (U.S.). National Mapping Division and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flattening the Earth written by John P. Snyder and published by University of Chicago Press. This book was released on 1997-12-05 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cartographers have long grappled with the impossibility of portraying the earth in two dimensions. To solve this problem, mapmakers have created map projections. This work discusses and illustrates the known map projections from before 500BC to the present, with facts on their origins and use.
Download or read book Rediscovering the World written by Benjamin Hennig and published by Springer Science & Business Media. This book was released on 2012-12-14 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: ‘We need new maps’ is the central claim made in this book. In a world increasingly influenced by human action and interaction, we still rely heavily on mapping techniques that were invented to discover unknown places and explore our physical environment. Although the traditional concept of a map is currently being revived in digital environments, the underlying mapping approaches are not capable of making the complexity of human-environment relationships fully comprehensible. Starting from how people can be put on the map in new ways, this book outlines the development of a novel technique that stretches a map according to quantitative data, such as population. The new maps are called gridded cartograms as the method is based on a grid onto which a density-equalising cartogram technique is applied. The underlying grid ensures the preservation of an accurate geographic reference to the real world. It allows the gridded cartograms to be used as basemaps onto which other information can be mapped. This applies to any geographic information from the human and physical environment. As demonstrated through the examples presented in this book, the new maps are not limited to showing population as a defining element for the transformation, but can show any quantitative geospatial data, such as wealth, rainfall, or even the environmental conditions of the oceans. The new maps also work at various scales, from a global perspective down to the scale of urban environments. The gridded cartogram technique is proposed as a new global and local map projection that is a viable and versatile alternative to other conventional map projections. The maps based on this technique open up a wide range of potential new applications to rediscover the diverse geographies of the world. They have the potential to allow us to gain new perspectives through detailed cartographic depictions.
Download or read book Map Projections written by Arthur Robert Hinks and published by . This book was released on 1912 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lining Up Data in ArcGIS written by Margaret M. Maher and published by Esri Press. This book was released on 2010 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents practical techniques on how to identify data projections, create custom projections to align data, and solve common data alignment problems.
