Download or read book Manufactura ingenier a y tecnolog a written by Serope Kalpakjian and published by Pearson Educación. This book was released on 2002 with total page 1182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Selection written by K. G. Swift and published by Elsevier. This book was released on 2003-06-02 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive practical guide to choosing the optimum manufacturing process, written for students and engineers. Process Selection provides engineers with the essential technological and economic data to guide the selection of manufacturing processes. This fully revised second edition covers a wide range of important manufacturing processes and will ensure design decisions are made to achieve optimal cost and quality objectives. Expanded and updated to include contemporary manufacturing, fabrication and assembly technologies, the book puts process selection and costing into the context of modern product development and manufacturing, based on parameters such as materials requirements, design considerations, quality and economic factors. Key features of the book include: manufacturing process information maps (PRIMAs) provide detailed information on the characteristics and capabilities of 65 processes and their variants in a standard format; process capability charts detailing the processing tolerance ranges for key material types; strategies to facilitate process selection; detailed methods for estimating costs, both at the component and assemby level. The approach enables an engineer to understand the consequences of design decisions on the technological and economic aspects of component manufacturing, fabrication and assembly. This comprehensive book provides both a definitive guide to the subject for students and an invaluable source of reference for practising engineers. - Manufacturing process information maps (PRIMAs) provide detailed information on the characteristics and capabilities of 65 processes in a standard format - Process capability charts detail the processing tolerance ranges for key material types - Detailed methods for estimating costs, both at the component and assembly level
Download or read book Introduction to Manufacturing Processes written by John A. Schey and published by . This book was released on 2000 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developing Innovation Systems written by Mario Cimoli and published by Routledge. This book was released on 2013-09-05 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mexico provides a case study of a cornerstone economy in the development of the hemospheric free trade zone in the Americas, an adjusting economy which has been integrated into uneven economies (Canada and the US). This volume examines the Mexican economy and its attempt to develop an innovation system, providing an example of the dynamics that are of concern to evolutionary economists.
Download or read book MANUFACTURA INGENIERIA Y TECNOLOGIA VOLUMEN 2 written by SEROPE; SCHMID KALPAKJIAN (STEVEN R.) and published by . This book was released on 2014 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Human Resource Management written by R. Wayne Mondy and published by Pearson Educación. This book was released on 2005 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: A balance of practical and applied material which also underpins the crucial theoretical concepts that are being applied in today's human resources. For undergraduate/graduate courses in Human Resource Management.
Download or read book FID News Bulletin written by International Federation for Documentation. General Secretariat and published by . This book was released on 1967 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Implementing Change written by Gene E. Hall and published by Prentice Hall. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A research-based guide for educators to the practical methods of understanding, evaluating and facilitating the change process. Significantly revised based on student and instructor feedback, the new third edition of Implementing Change continues to examine the ways in which change processes are experienced by those "on the ground" while adding new features, new material and the most current research. Based primarily on the Concerns Based Adoption Model (CBAM), this user-friendly text focuses on introducing constructs that can be used by those engaged in facilitating change processes as well as those who are evaluating and studying change. Rather than maintaining a bird's eye view of change processes, each chapter introduces a research-based, research-verified construct about change that captures the complexity of implementing change and the diversity of reactions to it. With a stress on pedagogical aids, each chapter incorporates practical examples, sample research, case studies, reflection questions and examples of common roadblocks to change.
Download or read book 6th International Conference on the Conservation of Earthen Architecture written by The Getty Conservation Institute and published by Getty Publications. This book was released on 1991-02-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: On October 14-19, 1990, the 6th International Conference on the Conservation of Earthen Architecture was held in Las Cruces, New Mexico. Sponsored by the GCI, the Museum of New Mexico State Monuments, ICCROM, CRATerre-EAG, and the National Park Service, under the aegis of US/ICOMOS, the event was organized to promote the exchange of ideas, techniques, and research findings on the conservation of earthen architecture. Presentations at the conference covered a diversity of subjects, including the historic traditions of earthen architecture, conservation and restoration, site preservation, studies in consolidation and seismic mitigation, and examinations of moisture problems, clay chemistry, and microstructures. In discussions that focused on the future, the application of modern technologies and materials to site conservation was urged, as was using scientific knowledge of existing structures in the creation of new, low-cost, earthen architecture housing.
Download or read book Cat logo de Servicios en Materia de Cooperaci n T cnica Entre Paises en Desarrollo written by United Nations Development Programme and published by . This book was released on 1978 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CIMOSA Open System Architecture for CIM written by ESPRIT Consortium AMICE and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enterprise operation efficiency is seriously constrained by the inability to provide the right information, in the right place, at the right time. In spite of significant advances in technology it is still difficult to access information used or produced by different applications due to the hardware and software incompatibilities of manufacturing and information processing equipment. But it is this information and operational knowledge which makes up most of the business value of the enterprise and which enables it to compete in the marketplace. Therefore, sufficient and timely information access is a prerequisite for its efficient use in the operation of enterprises. It is the aim of the ESPRIT project AMICE to make this knowledge base available enterprise-wide. During several ESPRIT contracts the project has developed and validated CIMOSA: Open System Architecture for CIM. The CIMOSA concepts provide operation structuring based on cooperating processes. Enterprise operations are represented in terms of functionality and dynamic behaviour (control flow). Information needed and produced, as well as resources and organisational aspects relevant in the course of the operation are modelled in the process model. However, the different aspects may be viewed separately for additional structuring and detailing during the enterprise engineering process.
Download or read book Engineering Education 4 0 written by Sulamith Frerich and published by Springer. This book was released on 2017-04-12 with total page 955 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of results from the interdisciplinary research project “ELLI” published by researchers at RWTH Aachen University, the TU Dortmund and Ruhr-Universität Bochum between 2011 and 2016. All contributions showcase essential research results, concepts and innovative teaching methods to improve engineering education. Further, they focus on a variety of areas, including virtual and remote teaching and learning environments, student mobility, support throughout the student lifecycle, and the cultivation of interdisciplinary skills.
Download or read book LEV written by and published by . This book was released on 1999 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufactura ingenier a y tecnolog a 5a ed written by Serope Kalpakjian and published by . This book was released on 2008 with total page 1333 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Neural Networks and Micromechanics written by Ernst Kussul and published by Springer Science & Business Media. This book was released on 2009-12-01 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromechanical manufacturing based on microequipment creates new possibi- ties in goods production. If microequipment sizes are comparable to the sizes of the microdevices to be produced, it is possible to decrease the cost of production drastically. The main components of the production cost - material, energy, space consumption, equipment, and maintenance - decrease with the scaling down of equipment sizes. To obtain really inexpensive production, labor costs must be reduced to almost zero. For this purpose, fully automated microfactories will be developed. To create fully automated microfactories, we propose using arti?cial neural networks having different structures. The simplest perceptron-like neural network can be used at the lowest levels of microfactory control systems. Adaptive Critic Design, based on neural network models of the microfactory objects, can be used for manufacturing process optimization, while associative-projective neural n- works and networks like ART could be used for the highest levels of control systems. We have examined the performance of different neural networks in traditional image recognition tasks and in problems that appear in micromechanical manufacturing. We and our colleagues also have developed an approach to mic- equipment creation in the form of sequential generations. Each subsequent gene- tion must be of a smaller size than the previous ones and must be made by previous generations. Prototypes of ?rst-generation microequipment have been developed and assessed.
Download or read book Machining of Light Alloys written by Diego Carou and published by CRC Press. This book was released on 2018-08-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium, magnesium and titanium are alloys of special interest for engineering applications in a wide range of sectors such as aeronautics, automotive and medical. Their low density, along with sufficient mechanical properties, makes them especially adequate for sectors such as transportation allowing diminishing weight less fuel consumption and emissions to the atmosphere. Nowadays, machining is still one the most important manufacturing processes, not only for metal parts, but also for specially designed hybrid parts for more demanding new applications. A wide range of valuable research has been done on the machining of conventional engineering materials. However, when dealing with light alloys and hybrid materials containing them, they need to face new challenges. Particularly, it is important to analyse the suitability of the machining of these alloys in the current context of Industry 4.0, focusing on the development of cost-effective and sustainable processes. This book is a comprehensive source on the machining of light alloys, presenting a collection of both experimental and review studies. The work is arranged in eight chapters, presented by a group of international scholars, which analyse the main problems related to the machining of these alloys from different perspectives. Key Features A comprehensive state-of-the-art reference source on machining of light alloys Provides research on conventional and non-conventional machining process Offers current research topics on sustainable machining Presents research on the machining of hybrid materials using light alloys Includes applications for Industry 4.0 environments Machining of Light Alloys: Aluminum, Titanium, and Magnesium The aim of the book is to serve as a tool for helping researchers and practitioners to face machining challenges and facilitating the development of new industrial applications for light alloys.
Download or read book Surface Engineering Casebook written by J S Burnell-Gray and published by Elsevier. This book was released on 1996-01-30 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concisely and uniquely encompasses the principles of corrosion and wear as manifested in industrial failures and the solutions offered by surface engineering.
