Download or read book Manual on Use of Self Propelled Modular Transporters to Remove and Replace Bridges written by United States Department of Transportation and published by CreateSpace. This book was released on 2015-02-26 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of self-propelled modular transporters (SPMTs) for bridge moves was the top implementation recommendation of the 2004 Prefabricated Bridge Elements and Systems International Scan sponsored by the Federal Highway Administration (FHWA), the American Association of State Highway and Transportation Officials (AASHTO), and the Transportation Research Board's National Cooperative Highway Research Program. Prefabrication of bridges offsite under more controlled conditions followed by rapid installation onsite can achieve quality installations in significantly less time than the months or years typically required for conventional bridge construction. The use of SPMTs in combination with prefabrication should be considered for all bridge replacement projects in locations with high traffic volumes. The purpose of the scan was to learn how other countries use prefabricated bridge components to minimize traffic disruption, improve work zone safety, reduce environmental impact, improve constructability, enhance quality, and lower life-cycle costs. The scan team learned that European countries frequently use SPMTs to lift and drive bridges to their final location in just minutes. SPMTs are computer-controlled platform vehicles that can move bridge systems weighing up to several thousand tons with precision to within a fraction of an inch. The prefabrication of bridges offsite under controlled conditions followed by rapid installation onsite can achieve quality installations with traffic impacts of minutes to a few hours compared to the months typically required for conventional onsite bridge construction. The significantly reduced onsite construction time when using SPMTs to move prefabricated bridge superstructures, for example, is due to the collapse of the sequential processes of conventional onsite bridge construction to just one step: moving the prefabricated superstructure from the staging area to its final position. This technology should be considered for all bridge replacement projects where reduced onsite construction time is a priority. The manual provides details from project conception to completion for using SPMTs to remove or install a bridge. It describes equipment, lists benefits and costs, and identifies criteria to determine when this technology is appropriate. It also addresses planning-related issues such as traffic considerations and site requirements. Design issues discussed include temporary shoring and prefabrication requirements, allowable temporary stresses and deflections during the move, and possible design efficiencies because of offsite prefabrication. Contracting issues covered include staging area requirements and contracting strategies for reduced onsite construction time. Using this manual in combination with the FHWA decisionmaking framework and analysis of delayrelated user costs should provide the guidance that bridge owners and other bridge professionals need to understand the technology, determine whether using SPMTs will benefit a specific bridge project, and develop contract documents that incorporate the technology.
Download or read book Manual on Use of Self propelled Modular Transporters to Remove and Replace Bridges written by and published by . This book was released on 2007 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual contains information on the equipment, benefits, costs, project selection criteria, planning, design, contracting issues, and example contract documents for using self-propelled modular transporters to move bridges. It also includes case studies and lessons learned from previous projects. The manual is intended for use by bridge owners, construction contractors, suppliers, and other professionals involved in bridge design and construction.
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this bestselling handbook covers virtually all the information an engineer would need to know about any type of bridge-from planning to construction to maintenance. It contains more than 2,500 tables, charts, and illustrations in a practical, ready-to-use format and an abundance of worked-out examples give readers numerous step-by-step design procedures. Extensively updated and featuring several new chapters, this volume, Construction and Maintenance, covers construction, inspection, bridge management systems, health monitoring, ratings, strengthening and rehabilitation, life cycle analysis and much more.
Download or read book Handbook of International Bridge Engineering written by Wai-Fah Chen and published by CRC Press. This book was released on 2013-10-11 with total page 1383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and up-to-date reference work and resource book covers state-of-the-art and state-of-the-practice for bridge engineering worldwide. Countries covered include Canada and the United States in North America; Argentina and Brazil in South America; Bosnia, Bulgaria, Croatia, Czech Republic, Denmark, Finland, France, Greece, Macedonia,
Download or read book Accelerated Bridge Construction written by Mohiuddin Ali Khan and published by Elsevier. This book was released on 2014-08-12 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: The traveling public has no patience for prolonged, high cost construction projects. This puts highway construction contractors under intense pressure to minimize traffic disruptions and construction cost. Actively promoted by the Federal Highway Administration, there are hundreds of accelerated bridge construction (ABC) construction programs in the United States, Europe and Japan. Accelerated Bridge Construction: Best Practices and Techniques provides a wide range of construction techniques, processes and technologies designed to maximize bridge construction or reconstruction operations while minimizing project delays and community disruption. Describes design methods for accelerated bridge substructure construction; reducing foundation construction time and methods by using pile bents Explains applications to steel bridges, temporary bridges in place of detours using quick erection and demolition Covers design-build systems' boon to ABC; development of software; use of fiber reinforced polymer (FRP) Includes applications to glulam and sawn lumber bridges, precast concrete bridges, precast joints details; use of lightweight aggregate concrete, aluminum and high-performance steel
Download or read book Innovative Bridge Designs for Rapid Renewal ABC Toolkit written by TRANSPORTATION RESEARCH BOARD and published by Transportation Research Board. This book was released on with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovative Bridge Designs for Rapid Renewal written by HNTB Corporation, Genesis Structures Inc, Structural Engineering Associates, and Iowa State University and published by Transportation Research Board. This book was released on with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report from the second Strategic Highway Research Program (SHRP 2), which is administered by the Transportation Research Board of the National Academies, documents the development of standardized approaches to designing and constructing complete bridge systems for rapid renewals.
Download or read book Innovative Bridge Designs for Rapid Renewal written by and published by . This book was released on 2014 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: "TRB's second Strategic Highway Research Program (SHRP 2) S2-R04-RR-1: Innovative Bridge Designs for Rapid Renewal documents the development of standardized approaches to designing and constructing complete bridge systems for rapid renewals. The report also describes a demonstration project on US 6 over the Keg Creek near Council Bluffs, Iowa that was completed in 2011 using the accelerated bridge construction standards developed as part of Renewal Project R04."--Publication info.
Download or read book Application of Accelerated Bridge Construction Connections in Moderate to High Seismic Regions written by and published by Transportation Research Board. This book was released on 2011 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB’s National Cooperative Highway Research Program (NCHRP) Report 698: Application of Accelerated Bridge Construction Connections in Moderate-to-High Seismic Regions evaluates the performance of connection details for bridge members in accelerated bridge construction in medium-to-high seismic regions and offers suggestions for further research.
Download or read book Maintenance Safety Risk Management and Life Cycle Performance of Bridges written by Nigel Powers and published by CRC Press. This book was released on 2018-07-04 with total page 5447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges contains lectures and papers presented at the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), held in Melbourne, Australia, 9-13 July 2018. This volume consists of a book of extended abstracts and a USB card containing the full papers of 393 contributions presented at IABMAS 2018, including the T.Y. Lin Lecture, 10 Keynote Lectures, and 382 technical papers from 40 countries. The contributions presented at IABMAS 2018 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of bridge maintenance, safety, risk, management and life-cycle performance. Major topics include: new design methods, bridge codes, heavy vehicle and load models, bridge management systems, prediction of future traffic models, service life prediction, residual service life, sustainability and life-cycle assessments, maintenance strategies, bridge diagnostics, health monitoring, non-destructive testing, field testing, safety and serviceability, assessment and evaluation, damage identification, deterioration modelling, repair and retrofitting strategies, bridge reliability, fatigue and corrosion, extreme loads, advanced experimental simulations, and advanced computer simulations, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of more rational decision-making on bridge maintenance, safety, risk, management and life-cycle performance of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.
Download or read book Handbook of Transportation Engineering Volume II 2e written by Myer Kutz and published by McGraw Hill Professional. This book was released on 2011-03-08 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive transportation engineering resource--fully revised and updated The two-volume Handbook of Transportation Engineering, Second Edition offers practical, comprehensive coverage of the entire transportation engineering field. Featuring 18 new chapters and contributions from nearly 70 leading experts, this authoritative work discusses all types of transportation systems--freight, passenger, air, rail, road, marine, and pipeline--and provides problem-solving engineering, planning, and design tools and techniques with examples of successful applications. Volume II focuses on applications in automobile and non-automobile transportation, and on safety and environmental issues. VOLUME II COVERS: Traffic engineering analysis Traffic origin-destination estimation Traffic congestion Highway capacity Traffic control systems: freeway management and communications Traffic signals Highway sign visibility Transportation lighting Geometric design of streets and highways Intersection and interchange design Pavement engineering: flexible and rigid pavements Pavement testing and evaluation Bridge engineering Tunnel engineering Pedestrians Bicycle transportation Spectrum of automated guideway transit (AGT) and its applications Railway vehicle engineering Railway track design Improvement of railroad yard operations Modern aircraft design techniques Airport design Air traffic control systems design Ship design Pipeline engineering Traffic safety Transportation hazards Hazardous materials transportation Incident management Network security and survivability Optimization of emergency evacuation plans Transportation noise issues Air quality issues in transportation Transportation and climate change
Download or read book Focus written by and published by . This book was released on 2010 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Public Roads written by and published by . This book was released on 2008 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flood Scour for Bridges and Highways written by Mohiuddin A. Khan and published by McGraw Hill Professional. This book was released on 2015-02-05 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Proven methods for preventing and mitigating bridge and highway flood scour Offering detailed guidelines on bridge scour countermeasures, this comprehensive resource provides a proactive strategy for the design and construction of bridges to prevent scour, as well as a reactive plan for post-flood disaster management. Topics discussed include erosion, causes of scour, AASHTO design codes, hydrology, hydraulics, scour analysis, inspection methods, and modern materials technology. Real-world case studies illustrate the concepts presented. The authoritative information in this practical guide will help you to develop more efficient and cost-effective design processes and bridge management systems for river bridges subjected to floods. Flood Scour for Bridges and Highways covers: Floods, scour problems, and mitigation River instability caused by flow obstructions Past failures and bridges vulnerable to failure Geotechnical and hydraulic issues at scour-critical rivers and bridges Hydrology, floods, and scour-critical bridges Estimating scour depths and selecting applicable countermeasures Inspections, ratings, and monitoring countermeasures FHWA, HEC-18, and HEC-23 scour countermeasures as remediation Innovative methods of flood control and disaster management
Download or read book LRFD Guide Specifications for the Design of Pedestrian Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Construction Handbook for Bridge Temporary Works written by American Association of State Highway and Transportation Officials and published by American Association of State Highway & Transportation Officials. This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Life cycle Cost Analysis written by Hugh Hawk and published by Transportation Research Board. This book was released on 2003 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying CD-ROM contains software, Guidance manual, User manual, and appendixes to report.
