Download or read book Manual of Symbols and Terminology for Physicochemical Quantities and Units Appendix II written by Robert L. Burwell and published by Elsevier. This book was released on 2013-09-17 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manual of Symbols and Terminology for Physicochemical Quantities and Units–Appendix II: Definitions, Terminology and Symbols in Colloid and Surface Chemistry, Part II: Heterogeneous Catalysis presents the pertinent definitions and terminologies concerning colloid and surface chemistry. This manual has been prepared by the Commission on Colloid and Surface Chemistry of the Division of Physical Chemistry of the International Union of Pure and Applied Chemistry. This book is comprised of one chapter subdivided into three sections. Section 1 presents a summary of definitions of several concepts involving surface chemistry. Section 2 presents a list of abbreviations and symbols used in colloid and surface chemistry. Section 3 presents a comprehensive index of symbols and terms that are arranged in alphabetical order to guide the readers. This book is a valuable resource for chemists and electrochemists.
Download or read book Manual of Symbols and Terminology for Physicochemical Quantities and Units written by D. H. Whiffen and published by Elsevier. This book was released on 2013-10-22 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manual of Symbols and Terminology for Physicochemical Quantities and Units, 1979 Edition contains physical quantity tabulations of products. The Commission on Symbols, Terminology, and Units is a part of the Division of Physical Chemistry of the International Union of Pure and Applied Chemistry. Its general responsibilities are to secure clarity and precision, and wider agreement in the use of symbols, by chemists in different countries, among physicists, chemists, and engineers, and by editors of scientific journals. This book is composed of 13 chapters, and begins with the determination of physical quantities and symbols for physical quantities, which are generally organized in a dimensional system built upon seven base quantities. The succeeding chapters deal with recommended names and symbols for quantities in chemistry and physics. These topics are followed by discussions on units and symbols for units, numbers that printed in upright type. Other chapters describe physical quantities, units, and numerical values, recommended mathematical symbols, symbols for chemical elements,nuclides, and particles. The final chapters consider the values of some fundamental constants. This book will be of value to analytical and physical chemists.
Download or read book Quantities Units and Symbols in Physical Chemistry written by International Union of Pure and Applied Chemistry. Physical and Biophysical Chemistry Division and published by Royal Society of Chemistry. This book was released on 2007 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the IUPAC Physical Chemistry Division this definitive manual, now in its third edition, is designed to improve the exchange of scientific information among the readers in different disciplines and across different nations. This book has been systematically brought up to date and new sections added to reflect the increasing volume of scientific literature and terminology and expressions being used. The Third Edition reflects the experience of the contributors with the previous editions and the comments and feedback have been integrated into this essential resource. This edition has been compiled in machine-readable form and will be available online.
Download or read book Quantities Units and Symbols in Physical Chemistry written by Christopher M A Brett and published by Royal Society of Chemistry. This book was released on 2023-11-29 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first IUPAC Manual of Symbols and Terminology for Physicochemical Quantities and Units was published in 1969 with the objective of 'securing clarity and precision, and wider agreement in the use of symbols, by chemists in different countries, among physicists, chemists and engineers, and by editors of scientific journals'. Subsequent revisions have taken account of many developments in the field and were also substantially expanded and improved in presentation in several new editions of what is now widely known as the ‘Green Book of IUPAC’. This abridged version of the forthcoming 4th edition reflects the experience of the contributors and users of the previous editions. The book has been systematically brought up to date and provides a compilation of generally used terms and symbols with brief, understandable definitions and explanations. Tables of important fundamental constants and conversion factors are included. In this abridged guide, the more specialized and complex material has been omitted, retaining, however, the essence of the Green Book. It is particularly intended to be suitable for students and teachers but it should also be useful for scientists, science publishers and organizations working across a multitude of disciplines requiring internationally approved terminology in the area of Physical Chemistry. It now includes the most up to date definitions and constants in agreement with the ‘new SI’ as established by agreement on the International System of Units in Paris in 2019. It should find the widest possible acceptance and use for best practice in science and technology.
Download or read book Quantities Units and Symbols in Physical Chemistry written by E Richard Cohen and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first IUPAC Manual of Symbols and Terminology for Physicochemical Quantities and Units (the Green Book) of which this is the direct successor, was published in 1969, with the object of 'securing clarity and precision, and wider agreement in the use of symbols, by chemists in different countries, among physicists, chemists and engineers, and by editors of scientific journals'. Subsequent revisions have taken account of many developments in the field, culminating in the major extension and revision represented by the 1988 edition under the simplified title Quantities, Units and Symbols in Physical Chemistry. This 2007, Third Edition, is a further revision of the material which reflects the experience of the contributors with the previous editions. The book has been systematically brought up to date and new sections have been added. It strives to improve the exchange of scientific information among the readers in different disciplines and across different nations. In a rapidly expanding volume of scientific literature where each discipline has a tendency to retreat into its own jargon this book attempts to provide a readable compilation of widely used terms and symbols from many sources together with brief understandable definitions. This is the definitive guide for scientists and organizations working across a multitude of disciplines requiring internationally approved nomenclature.
Download or read book Interfacial Chemistry of Rocks and Soils written by Noémi M. Nagy and published by CRC Press. This book was released on 2021-10-27 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of the basic interactions that take place between geological materials and different substances is the first step in understanding the effects of adsorption and other interfacial processes on the quality of rocks and soils, and on driving these processes towards a beneficial or neutral result. Interfacial Chemistry of Rocks and Soils examines the different processes at solid and liquid interfaces of soil and rock, presenting a complete analysis that emphasizes the importance of chemical species on these interactions. This Second Edition features novel results in the field and expanded coverage of the kinetics of interfacial processes. New content includes models of heterogeneous isotope exchange, sorption isotherms for heterovalent cation exchange, as well as sorption of anions by chemically modified clays. Summarizing the results and knowledge of the authors’ research in this field over several decades, this volume: Explores the individual components of the studied systems: the solid, the solution, and the interface Discusses the characteristics and thermodynamics of the interface Profiles the most important analytical methods in the study of interfacial processes Demonstrates transformations initiated by interfacial processes Outlines avenues of treatment that may solve geological, soil science, and environmental problems Drawn chiefly from the authors’ years of research at the Imre Lajos Isotope Laboratory in the Department of Physical Chemistry at the University of Debrecen in Hungary, this book discusses chemical reactions on the surfaces/interfaces of soils and rocks; examines the role of these processes in environmental, colloid and geochemistry; and explores the effects on agricultural, environmental and industrial applications.
Download or read book Environmental Colloids and Particles written by Kevin J. Wilkinson and published by John Wiley & Sons. This book was released on 2007-01-30 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the current knowledge of environmental colloids and includes reviews of the current understanding of structure, role and behaviour of environmental colloids and particles, whilst focussing directly on aquatic systems and soils. In addition, there is substantial critical assessment of the techniques employed for the sampling, size fractionation and characterisation of colloids and particles. Chemical, physical and biological processes and interactions involving colloids are described, and particular attention is paid to quantitative approaches that take account of particle heterogeneity and polydispersity. Presents critical reviews of the state-of-the-art knowledge of environmental colloids Critical assessment of techniques employed for the sampling, size fractionation and characterisation of colloids and particles are given Theoretical and experimental aspects of the methods as well as the required developments and possible recommendations are discussed Each chapter gives a brief introduction general enough for the non-specialist Written by a internationally recognized group of contributors
Download or read book A Thermochemical Heat Storage System for Households written by Armand Fopah Lele and published by Springer. This book was released on 2016-07-09 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers a comprehensive report on the design and optimization of a thermochemical heat storage system for use in buildings. It combines theoretical and experimental work, with a special emphasis on model-based methods. It describes the numerical modeling of the heat exchanger, which allows recovery of about two thirds of the waste heat from both solar and thermal energy. The book also provides readers with a snapshot of current research on thermochemical storage systems, and an in-depth review of the most important concepts and methods in thermal management modeling. It represents a valuable resource for students, engineers and researchers interested in thermal energy storage processes, as well as for those dealing with modeling and 3D simulations in the field of energy and process engineering.
Download or read book Calculating and Problem Solving Through Culinary Experimentation written by Hervé This vo Kientza and published by CRC Press. This book was released on 2022-11-03 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: While many books proliferate elucidating the science behind the transformations during cooking, none teach the concepts of physics chemistry through problem solving based on culinary experiments as this one by renowned chemist and one of the founders of molecular gastronomy. Calculating and Problem Solving Through Culinary Experimentation offers an appealing approach to teaching experimental design and scientific calculations. Given the fact that culinary phenomena need physics and chemistry to be interpreted, there are strong and legitimate reasons for introducing molecular gastronomy in scientific curriculum. As any scientific discipline, molecular gastronomy is based on experiments (to observe the phenomena to be studied) and calculation (to fit the many data obtained by quantitative characterization of the studied phenomena), but also for making the theoretical work without which no real science is done, including refuting consequences of the introduced theories. Often, no difficult calculations are needed, and many physicists, in particular, make their first steps in understanding phenomena with very crude calculations. Indeed, they simply apply what they learned, before moving to more difficult math. In this book, the students are invited first to make simple experiments in order to get a clear idea of the (culinary) phenomena that they will be invited to investigate, and then are asked simple questions about the phenomena, for which they have to transform their knowledge into skills, using a clear strategy that is explained throughout. Indeed, the is "problem solving based on experiments", and all this about food and cooking. Key Features: Introduces readers to tips for experimental work Shows how simple scientific knowledge can be applied in understanding questions Provides a sound method ("strategy") for calculation in physics and chemistry Presents important definitions and laws for physical chemistry Gives confidence in one’s calculation skill and problem solving skills Explore physical and chemical phenomena that occur during cooking A unique mix of culinary arts and correct calculations, this book is useful to students as well as professors in chemistry, physics, biology, food science and technology.
Download or read book Soils Ecosystem Processes and Agricultural Development written by Shinya Funakawa and published by Springer. This book was released on 2017-05-16 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to integrate environmental knowledge observed in local agriculture, based on the understanding of soils science and ecology, and to propose possible technical solutions and a more integrated approach to tropical agriculture. The chapters describe and analyze the ecological and technical countermeasures available for mitigating environmental degradation due to the increasing agricultural activities by humans, based on our scientific understanding of traditional agriculture in the tropics. This is an effective approach, as such ecological and technical tools previously involved in traditional activities are expected to be easily incorporated into present agricultural systems. The book starts with a rather classical pedological issue and analyzed traditional agricultural practices with different resource management strategies in terms of their modification of natural biological processes. It focuses on the present situation of tropical agriculture; that is, resource utilization in modern agriculture after application of technical innovation (increased application of chemical fertilizers as well as agricultural chemicals). Here, possible technical approaches to resource management that reasonably support agricultural production whilst mitigating environmental degradation are discussed. The negative impacts of agricultural development on our environment are rapidly growing, yet we are increasingly dependent on the agricultural sector for food and energy. The situation is similar in the tropics, where subsistence agriculture with low input management has long comprised most agricultural systems. Comparison of ecological and/or agronomical studies between different continents are still rare; therefore, this analysis may help clarify what is an essential problem when considering technical transportation beyond continents and/or between temperate and tropical regions.
Download or read book Water Pollution written by and published by Springer. This book was released on 2013-12-30 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Environmental Chemistry provides the compilation of today's knowledge of processes in the natural environment and the behavior and impact of pollutants. It provides a valuable source for environmental managers, decision-makers, and scientists. Volume 5A is dedicated to water pollution.
Download or read book Environmental Organic Chemistry written by Rene P. Schwarzenbach and published by John Wiley & Sons. This book was released on 2016-10-12 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines in a pedagogical way all pertinent molecular and macroscopic processes that govern the distribution and fate of organic chemicals in the environment and provides simple modeling tools to quantitatively describe these processes and their interplay in a given environmental system Treats fundamental aspects of chemistry, physics, and mathematical modeling as applied to environmentally relevant problems, and gives a state of the art account of the field Teaches the reader how to relate the structure of a given chemical to its physical chemical properties and intrinsic reactivities Provides a holistic and teachable treatment of phase partitioning and transformation processes, as well as a more focused and tailor-made presentation of physical, mathematical, and modeling aspects that apply to environmental situations of concern Includes a large number of questions and problems allowing teachers to explore the depth of understanding of their students or allowing individuals who use the book for self-study to check their progress Provides a companion website, which includes solutions for all problems as well as a large compilation of physical constants and compound properties
Download or read book Catalysis written by J. R. Anderson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: NMR methods have for a considerable time been standard processes for the analysis of molecular structure: so much so that they are now universally regarded as indispensable for this purpose. Nevertheless, with the passage of time, NMR methodology has been elaborated to levels of ever increasing complexity and analytical sophistication so that the non specialist may now be readily excused for the belief that for anything beyond relatively elementary methods one would be well advised to work in collaboration with the specialist experts. The application of NMR methods to the field of catalysis occurred, in the main, relatively late in the day, mainly be cause those catalysts of greatest industrial importance, that is heterogeneous catalysts, are solids and so require special NMR methods if usefully narrow NMR lines are to be ob servable. Even so, magic-angle spinning NMR methodology is now thoroughly well established and is finding increasing use in the study of catalyst structure. Of course, conventional NMR methods have been used for a considerable time for the analysis of the products of catalytic reactions. Chapter 1 of the present volume by Professor Jacques Fraissard and his collaborators is designed to give an account of the application of NMR methods to the field of catalysis, but not including the conventional use of NMR for reaction product analysis, since this is already well covered in the existing NMR literature.
Download or read book Fate and Transport of Heavy Metals in the Vadose Zone written by I.K. Iskandar and published by CRC Press. This book was released on 1999-04-23 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapters of this book were originally presented at the Fourth International Conference on the Biogeochemistry of Trace Elements, in June 1997 at Berkeley, California. The results of that symposium are now available to assist both specialists and those concerned with broader environmental issues. The first four chapters of Fate and Transport of Heavy Metals in the Vadose Zone are devoted to sorption-desorption processes. Subjects include the kinetics of trace metal sorption-desorption, adsorption of nickel and their isotherms, cadmium reactions, and retention mechanisms of both linear and nonlinear types. The next three sections describe complexation and speciation processes. The authors consider the effect of humic and fulvic acids, the binding of copper with organic matter, and the rate of dissolved selenium. Chapters eight through eleven scrutinize the bioavailability and retention of heavy metals and their mobility in the vadose zone. Twelve details plant-available concentration levels for heavy metals in the vadose zone. The last section relates case studies that are relevant to environmental affairs. Features
Download or read book Characterization of Porous Solids written by H. Kral and published by Elsevier. This book was released on 1988-04-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of porosity has long been recognized by scientists and engineers. Porous solids are widely encountered in industry and everyday life and their behaviour, e.g. chemical reactivity, adsorptive capacity, and catalytic activity is dependent on their pore structure. A considerable amount of work on porous solids has been undertaken both in academic and in industrial laboratories. However, all this activity is in urgent need of a critical appraisal. To undertake this task, a number of leading experts in the field of adsorption, porosimetry, X-ray and neutron scattering, optical and electron microscopy, calorimetry and fluid permeation, were brought together at the 1987 IUPAC (COPS I) Symposium.This proceedings volume provides an up-to-date overall review of the theoretical foundations for modelling and characterizing porous systems. It deals with most of the techniques in current use as applied to both model systems and porous solids of industrial importance. The reader will find the description and discussion of a number of novel techniques as well as a critical appraisal and comparison of the more established methods. All those concerned with the characterization of porous solids in academic and industrial laboratories will find much to interest them in this volume. It should be on the bookshelf of applied research centres involved in adsorption, catalysis, purification of gases and liquids, pigments, fillers, building materials, etc.
Download or read book Experimental Methods for Evaluation of Hydrotreating Catalysts written by Jorge Ancheyta and published by John Wiley & Sons. This book was released on 2020-03-13 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents detailed information and study cases on experiments on hydrotreating catalysts for the petroleum industry Catalytic hydrotreating (HDT) is a process used in the petroleum refining industry for upgrading hydrocarbon streams—removing impurities, eliminating metals, converting asphaltene molecules, and hydrocracking heavy fractions. The major applications of HDT in refinery operations include feed pretreatment for conversion processes, post-hydrotreating distillates, and upgrading heavy crude oils. Designing HDT processes and catalysts for successful commercial application requires experimental studies based on appropriate methodologies. Experimental Methods for Evaluation of Hydrotreating Catalysts provides detailed descriptions of experiments in different reaction scales for studying the hydrotreating of various petroleum distillates. Emphasizing step-by-step methodologies in each level of experimentation, this comprehensive volume presents numerous examples of evaluation methods, operating conditions, reactor and catalyst types, and process configurations. In-depth chapters describe experimental setup and procedure, analytical methods, calculations, testing and characterization of catalyst and liquid products, and interpretation of experiment data and results. The text describes experimental procedure at different levels of experimentation—glass reactor, batch reactor, continuous stirred tank reactor, and multiple scales of tubular reactors—using model compounds, middle distillates and heavy oil. This authoritative volume: Introduces experimental setups used for conducting research studies, such as type of operation, selection of reactor, and analysis of products Features examples focused on the evaluation of different reaction parameters and catalysts with a variety of petroleum feedstocks Provides experimental data collected from different reaction scales Includes experiments for determining mass transfer limitations and deviation from ideality of flow pattern Presents contributions from leading scientists and researchers in the field of petroleum refining Experimental Methods for Evaluation of Hydrotreating Catalysts is an indispensable reference for researchers and professionals working in the area of catalytic hydrotreating, as well as an ideal textbook for courses in fields such as chemical engineering, petrochemical engineering, and biotechnology.
Download or read book Gas Separation Membranes written by Ahmad Fauzi Ismail and published by Springer. This book was released on 2015-04-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the tremendous progress that has been made in the development of gas separation membranes based both on inorganic and polymeric materials. Materials discussed include polymer inclusion membranes (PIMs), metal organic frameworks (MOFs), carbon based materials, zeolites, as well as other materials, and mixed matrix membranes (MMMs) in which the above novel materials are incorporated. This broad survey of gas membranes covers material, theory, modeling, preparation, characterization (for example, by AFM, IR, XRD, ESR, Positron annihilation spectroscopy), tailoring of membranes, membrane module and system design, and applications. The book is concluded with some perspectives about the future direction of the field.
