Download or read book Manual for the Design of Steelwork Building Structures to EC3 written by and published by . This book was released on 2000 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Steel Structures written by Luís Simões da Silva and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.
Download or read book Manual for the Design of Steelwork Building Structures written by A. J. Rathbone and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel Designers Manual written by Steel Construction Institute (Great Britain) and published by John Wiley & Sons. This book was released on 2012-02-20 with total page 1401 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2010 the then current European national standards for building and construction were replaced by the EN Eurocodes, a set of pan-European model building codes developed by the European Committee for Standardization. The Eurocodes are a series of 10 European Standards (EN 1990 – EN 1999) that provide a common approach for the design of buildings, other civil engineering works and construction products. The design standards embodied in these Eurocodes will be used for all European public works and are set to become the de-facto standard for the private sector in Europe, with probable adoption in many other countries. This classic manual on structural steelwork design was first published in 1955, since when it has sold many tens of thousands of copies worldwide. For the seventh edition of the Steel Designers' Manual all chapters have been comprehensively reviewed, revised to ensure they reflect current approaches and best practice, and brought in to compliance with EN 1993: Design of Steel Structures (the so-called Eurocode 3).
Download or read book Manual for the Design of Steelwork Building Structures written by Institution of Structural Engineers and published by . This book was released on 1990 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Steel Structures written by Elias G. Abu-Saba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.
Download or read book Steel Construction Manual written by American Institute of Steel Construction and published by Amer Inst of Steel Construction. This book was released on 2011 with total page 2192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1926 [i.e. 1927] under title: Steel construction; title of 8th ed.: Manual of steel construction.
Download or read book Manual for the Design of Steelwork Building Structures written by Institution of Structural Engineers (Great Britain) and published by . This book was released on 1989 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual for the Design of Concrete Building Structures to Eurocode 2 written by and published by . This book was released on 2006-01-01 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel Designers Manual Fifth Edition The Steel Construction Institute written by Institute Steel Construction and published by Wiley-Blackwell. This book was released on 1993-01-18 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic manual for structural steelwork design was first published in 1956. Since then, it has sold many thousands of copies worldwide. The fifth edition is the first major revision for 20 years and is the first edition to be fully based on limit state design, now used as the primary design method, and on the UK code of practice, BS 5950. It provides, in a single volume, all you need to know about structural steel design.
Download or read book Structural Elements Design Manual written by Trevor Draycott and published by Newnes. This book was released on 2014-05-12 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Elements Design Manual is a manual on the practical design of structural elements that comprise a building structure, namely, timber, concrete, masonry, and steel. Practical guidance on the design of structural elements is provided in accordance with the appropriate British Standard or Code of Practice. Plenty of worked examples are included. Comprised of five chapters, this book begins with an overview of interrelated matters with which the structural engineer is concerned in the design of a building or similar structure. The British Standards and Codes of Practice are also considered, along with loading, structural mechanics, and theory of bending. The discussion then turns to timber, concrete, masonry, and steel elements, with emphasis on safety considerations and material properties. This monograph should prove useful not only to students of structural and civil engineering, but also to those studying for qualifications in architecture, building, and surveying who need to understand the design of structural elements.
Download or read book Design of Steel Structures to Eurocodes written by Ioannis Vayas and published by Springer. This book was released on 2018-11-23 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes.
Download or read book Sustainable Steel Buildings written by Milan Veljkovic and published by John Wiley & Sons. This book was released on 2016-10-31 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Steel Buildings betrachtet Stahl und seine Einsatzmöglichkeiten als nachhaltigen Konstruktionswerkstoff. Es bietet einen umfassenden Überblick hinsichtlich Nachhaltigkeit und zeigt auf, wie Stahl mit einem hohen Maß an Nachhaltigkeit für Gebäude genutzt werden kann. Das Buch konzentriert sich auf die Vor- und Nachteile von Stahl und wie diese Eigenschaften im Rahmen internationaler Zertifizierungssysteme eingesetzt werden können (DGNB, LEED, BREEAM, openhouse etc). Um ein möglichst umfassendes Spektrum abzudecken, behandelt das Buch die folgenden Themen: * Der Hintergrund nachhaltigen Bauens * Grundlagen einer ressourcenschonenden Bauweise * Methoden und Gestaltungsmittel für die Bereitstellung nachhaltiger Gebäude * Stahl und sein Abschneiden in Zertifizierungssystemen, sowohl Kriterien als auch werkstoffspezifische Antworten * Informationen und Daten hinsichtlich relevanter Stahlbauprodukte * Beispiele nachhaltiger Gebäude in Stahlbauweise.
Download or read book Metric Handbook written by Pamela Buxton and published by Routledge. This book was released on 2015-03-05 with total page 1585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significantly updated in reference to the latest construction standards and evolving building types Many chapters revised including housing, transport, offices, libraries and hotels New chapter on flood-aware design Sustainable design integrated into chapters throughout Over 100,000 copies sold to successive generations of architects and designers - this book belongs in every design studio and architecture school library The Metric Handbook is the major handbook of planning and design information for architects and architecture students. Covering basic design data for all the major building types, it is the ideal starting point for any project. For each building type, the book gives the basic design requirements and all the principal dimensional data, and succinct guidance on how to use the information and what regulations the designer needs to be aware of. As well as building types, the Metric Handbook deals with broader aspects of design such as materials, acoustics and lighting, and general design data on human dimensions and space requirements. The Metric Handbook provides an invaluable resource for solving everyday design and planning problems.
Download or read book Steel Designers Manual written by SCI (Steel Construction Institute) and published by John Wiley & Sons. This book was released on 2016-06-27 with total page 1410 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2010 the then current European national standards for building and construction were replaced by the EN Eurocodes, a set of pan-European model building codes developed by the European Committee for Standardization. The Eurocodes are a series of 10 European Standards (EN 1990 – EN 1999) that provide a common approach for the design of buildings, other civil engineering works and construction products. The design standards embodied in these Eurocodes will be used for all European public works and are set to become the de-facto standard for the private sector in Europe, with probable adoption in many other countries. This classic manual on structural steelwork design was first published in 1955, since when it has sold many tens of thousands of copies worldwide. For the seventh edition of the Steel Designers' Manual all chapters have been comprehensively reviewed, revised to ensure they reflect current approaches and best practice, and brought in to compliance with EN 1993: Design of Steel Structures (the so-called Eurocode 3).
Download or read book Architecturally Exposed Structural Steel written by Terri Meyer Boake and published by Birkhäuser. This book was released on 2015-02-17 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the means for a better control and purposeful consideration of the design of Architecturally Exposed Structural Steel (AESS). It deploys a detailed categorization of AESS and its uses according to design context, building typology and visual exposure. In a rare combination, this approach makes high quality benchmarks compatible with economies in terms of material use, fabrication methods, workforce and cost. Building with exposed steel has become more and more popular worldwide, also as advances in fire safety technology have permitted its use for building tasks under stringent fire regulations. On her background of long standing as a teacher in architectural steel design affiliated with many institutions, the author ranks among the world‘s best scholars on this topic. Among the fields covered by the extensive approach of this book are the characteristics of the various categories of AESS, the interrelatedness of design, fabrication and erection of the steel structures, issues of coating and protection (including corrosion and fire protection), special materials like weathering steel and stainless steel, the member choices and a connection design checklist. The description draws on many international examples from advanced contemporary architecture, all visited and photographed by the author, among which figure buildings like the Amgen Helix Bridge in Seattle, the Shard Observation Level in London, the New York Times Building and the Arganquela Footbridge.
Download or read book Metric Handbook written by David Littlefield and published by Elsevier. This book was released on 2008 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with all the principal building types, ranging from airports, factories and warehouses, offices, shops and hospitals. For each such building type, the basic design requirements and all the principal dimensional data is given.
