Download or read book Physical Metallurgy of High Manganese Steels written by Wolfgang Bleck and published by MDPI. This book was released on 2019-12-06 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue ‘Physical Metallurgy of High Manganese Steels’ addresses the highly fascinating class of manganese-alloyed steels with manganese contents well above 3 mass%. The book gathers manuscripts from internationally recognized researchers with stimulating new ideas and original results. It consists of fifteen original research papers. Seven contributions focus on steels with manganese contents above 12 mass%. These contributions cover fundamental aspects of process-microstrcuture-properties relationships with processes ranging from cold and warm rolling over deep rolling to heat treatment. Novel findings regarding the fatigue and fracture behavior, deformation mechanisms, and computer-aided design are presented. Additionally, the Special Issue also reflects the current trend of reduced Mn content (3-12 mass%) in advanced high strength steels (AHSS). Eight contributions were dedicated to these alloys, which are often referred to as 3rd generation AHSS, medium manganese steels or quenching and partitioning (Q&P/Q+P) steels. The interplay between advanced processing, mainly novel annealing variants, and microstructure evolution has been addressed using computational and experimental approaches. A deeper understanding of strain-rate sensitivity, hydrogen embrittlement, phase transformations, and the consequences for the materials’ properties has been developed. Hence, the topics included are manifold, fundamental-science oriented and, at the same time, relevant to industrial application.
Download or read book Manganese in Powder Metallurgy Steels written by Andrej Šalak and published by Springer Science & Business Media. This book was released on 2012-07-13 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work in three parts presents a summary of the sintered manganese steel properties from 1948 to 2011 involving processing conditions and other characteristics. In the first and third part are given results attained by the authors based on their finding that manganese (cheapest element) during sintering evaporates and by this the vapour cleans the sintering atmospheres from humidity. The second part presents other positive properties of manganese steels in spite of the doubt of oxidation of manganese during sintering and by this excluding the sintering manganese steels what hinderd the use of manganese in production of sintered parts. All results confirm that only manganese vapour according to finding of the authors ensures effective sintering of manganese steels and parts independently on the authors mind. It follows finally from the work that manganese is possible to use for alloying of powder steels sintered also in practice in H/N atmospheres with low purity and also in pure nitrogen - cheaper than hydrogen without some of the associated problems. Current trends in the field are also presented to the reader.
Download or read book Manganese steel written by Robert Abbott Hadfield and published by . This book was released on 1888 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manganese Steel written by Carnegie Library of Pittsburgh and published by . This book was released on 1926 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manganese Deposits of the United States with Sections on Foreign Deposits Chemistry and Uses written by Edmund Cecil Harder and published by . This book was released on 1910 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Woldman s Engineering Alloys written by John P. Frick and published by ASM International. This book was released on 2000-01-01 with total page 1369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation New edition of a reference that presents the values of properties typical for the most common alloy processing conditions, thus providing a starting point in the search for a suitable material that will allow, with proper use, all the necessary design limitations to be met (strength, toughness, corrosion resistance and electronic properties, etc.) The data is arranged alphabetically and contains information on the manufacturer, the properties of the alloy, and in some cases its use. The volume includes 32 tables that present such information as densities, chemical elements and symbols, physical constants, conversion factors, specification requirements, and compositions of various alloys and metals. Also contains a section on manufacturer listings with contact information. Edited by Frick, a professional engineering consultant. Annotation c. Book News, Inc., Portland, OR (booknews.com).
Download or read book Manganese Metal from the People s Republic of China written by United States International Trade Commission and published by . This book was released on 1994 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Railway Machinery written by and published by . This book was released on 1911 with total page 1262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Wear written by R. Chattopadhyay and published by ASM International. This book was released on 2001-01-01 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Describes the surface properties controlling the wear processes in different environments, and presents techniques for reducing specific type of wear through modification of surface properties. The author characterizes the energy, morphology, and composition of surfaces, then identifies the mechanisms of wear caused by adhesion, abrasion, erosion, corrosion, and heat. The main section of the book discusses the various surface protection technologies: strain hardening, thermally assisted diffusion processes, hardening by thermal treatment, thin film coatings, and thick film overlays. The final chapters address metal, plastic and ceramic composites that resist wear, and provide a wear diagnosis methodology. Annotation copyrighted by Book News Inc., Portland, OR
Download or read book Machinery written by Fred Herbert Colvin and published by . This book was released on 1911 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alloying written by Joseph R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloying: Understanding the Basics is a comprehensive guide to the influence of alloy additions on mechanical properties, physical properties, corrosion and chemical behavior, and processing and manufacturing characteristics. The coverage considers "alloying" to include any addition of an element or compound that interacts with a base metal to influence properties. Thus, the book addresses the beneficial effects of major alloy additions, inoculants, dopants, grain refiners, and other elements that have been deliberately added to improve performance, as well the detrimental effects of minor elements or residual (tramp) elements included in charge materials or that result from improper melting or refining techniques. The content is presented in a concise, user-friendly format. Numerous figures and tables are provided. The coverage has been weighted to provided the most detailed information on the most industrially important materials.
Download or read book The Making Shaping and Treating of Steel written by James McIntyre Camp and published by . This book was released on 1925 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steam Shovel and Dredge written by and published by . This book was released on 1923 with total page 1560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel and Its Heat Treatment written by Denison Kingsley Bullens and published by . This book was released on 1927 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Mechanics written by and published by . This book was released on 1890 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of the Iron and Steel Institute written by Iron and Steel Institute and published by . This book was released on 1888 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes sect. "A survey of literature on the manufacture and properties of iron and steel, and kindred subjects" (title varies)
Download or read book Report on the Formation of Transverse Fssures in Steel Rails and Their Prevalence on Certain Railroads written by United States. Interstate Commerce Commission and published by . This book was released on 1923 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
