Download or read book Managing New Product and Process Development written by Steven C. Wheelwright and published by Simon and Schuster. This book was released on 2010-07-06 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: Argues that a company's capability to conceive and design quality prototypes and bring a variety of products to market more quickly than its competitors is increasingly the focal point of competition. The authors present principles for developing speed and efficiency.

Download or read book Managing the New Product Development Process written by Robert J. Dolan and published by Prentice Hall. This book was released on 1993 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents of this book are based on the HBS course "New Product Development: An Analytical Approach." The philosophy of this course is that a deep understanding of consumer decision making is the key to success at the various stages in the development process and that there is a set of tools which provides managers with the necessary insights. The book's objective is to provide the knowledge necessary for a manager to use and employ these tools effectively in new product decision making.

Download or read book Lean Product and Process Development 2nd Edition written by Allen C. Ward and published by Lean Enterprise Institute. This book was released on 2014-03-05 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The P-51 Mustang—perhaps the finest piston engine fighter ever built—was designed and put into flight in just a few months. Specifications were finalized on March 15, 1940; the airfoil prototype was complete on September 9; and the aircraft made its maiden flight on October 26. Now that is a lean development process!" —Allen Ward and Durward Sobek, commenting on the development of the P-51 Mustang and its exemplary use of trade-off curves. Shingo Research and Professional Publication Award recipient, 2008 Despite attempts to interpret and apply lean product development techniques, companies still struggle with design quality problems, long lead times, and high development costs. To be successful, lean product development must go beyond techniques, technologies, conventional concurrent engineering methods, standardized engineering work, and heavyweight project managers. Allen Ward showed the way. In a truly groundbreaking first edition of Lean Product and Process Development, Ward delivered -- with passion and penetrating insights that cannot be found elsewhere -- a comprehensive view of lean principles for developing and sustaining product and process development. In the second edition, Durward Sobek, professor of Mechanical and Industrial Engineering at Montana State University—and one of Ward’s premier students—edits and reorganizes the original text to make it more accessible and actionable. This new edition builds on the first one by: Adding five in-depth and inspiring case studies. Including insightful new examples and illustrations. Updating concepts and tools based on recent developments in product development. Expanding the discussion around the critical concept of set-based concurrent engineering. Adding a more detailed table of contents and an index to make the book more accessible and user-friendly. The True Purpose of Product Development Ward’s core thesis is that the very aim of the product development process is to create profitable operational value streams, and that the key to doing so predictably, efficiently, and effectively is to create useable knowledge. Creating useable knowledge requires learning, so Ward also creates a basic learning model for development. But Ward not only describes the technical tools needed to make lean product and process development actually work. He also delineates the management system, management behaviors, and mental models needed. In this breakthrough text, Ward: Asks fundamental questions about the purpose and “value added” in product development so you gain a crystal clear understanding of essential issues. Shows you how to find the most common forms of “knowledge waste” that plagues product development. Identifies four “cornerstones” of lean product development gleaned from the practices of successful companies like Toyota and its partners, and explains how they differ from conventional practices. Gives you specific, practical recommendations for establishing your own lean development processes. Melds observations of effective teamwork from his military background, engineering fundamentals from his education and personal experience, design methodology from his research, and theories about management and learning from his study of history and experiences with customers. Changes your thinking forever about product development.

Download or read book The Pursuit of New Product Development written by Marc Annacchino and published by Elsevier. This book was released on 2011-04-01 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Pursuit of New Product Development: The Business Development Process begins with an understanding of market needs, within a sound business model, a well-defined financial strategy, and well-thought-out strategic goals. This new book by industry-expert Marc Annacchino, will help the professional engineer, manager, marketer, and all others who must come together as a working team, to better understand their respective roles and responsibilities in that process. Today, speeding the right value proposition to the market can make all the difference between success and failure. With case examples, organizational analysis and project planning tools, this new book looks at that longer, organizational view of product development, and how that view can improve product development cycle times and better take advantage of new market opportunities. It will help the product development team better adapt to change and a dynamic market in today's global economy through product platform management, and do so rationally and reliably. And it will help product development professionals to look for hidden value in existing product lines as they plan for that change and growth ahead. - Provides product development professionals with the concepts and tools for a more integrated, successful product development cycle - Promotes a more coherent deployment of managers, engineers, marketers, and sales personnel to achieve results within market opportunity in terms of time, cost and performance - Shows how to better identify and target product value propositions in product line extensions and in securing new markets

Download or read book Innovating in Product Process Development written by Mikel Sorli and published by Springer Science & Business Media. This book was released on 2009-07-01 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovating in Product/Process Development demonstrates how to achieve true innovation in product development, and how to launch a new product in the quickest and cheapest way. The new approach to product development proposed in this book is based on the most recent research in the field. It suggests the integration of several tools that are currently only used independently, with the aim of stimulating the creation of innovative ideas in general, and specifically in the areas of product/process improvements and problem solving. Innovating in Product/Process Development explores different aspects of innovation processes in twenty-first century industry from a global economic perspective. It presents in detail several approaches to support these processes, from ICT-based systems to collaborative working environments, all of which will be of interest to MBA or advanced students; researchers; and design teams charged with the creation of new product lines.

Download or read book New Product Development written by Marc Annacchino and published by Elsevier. This book was released on 2003-10-16 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marc Annacchino's New Product Development will maximize return on development dollar invested by providing the reader with an interdisciplinary understanding of the new product development process. New Product Development is the last frontier in gaining a competitive edge. While other factors such as functionality, quality and reliability, availability and shipment performance are now entry level requirements, New Product Development is the competitive weapon of necessity. This comprehensive and detailed book is a practical guide to the process of New Product Development from initial concept and corporate goals assessment through marketing, planning, development, manufacturing and product management. It contains over 200 illustrations with 52 actual tools needed to execute an actual program. On the accompanying CD-ROM version, these tools are embedded in the text for presentation to the reader. Embedded hyperlinks allow the reader to jump to a special "sandbox" which will allow them to apply the concepts presented in the text directly to their development program and save them as part of their filing system, providing the actual framework for practitioner use.This book and accompanying tool set is the best investment you can make to ensure new product success!*Contains CD-ROM with over 50 software tools needed to implement programs*Presents a unique multidimensional perspective that comes from 26 years of experience and over 40 real implementations*Provides readers with blueprints for organizing and documenting their development programs

Download or read book Revolutionizing Product Development written by Steven C. Wheelwright and published by Simon and Schuster. This book was released on 1992-06-15 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, a company's capability to conceive and design quality prototypes and bring a variety of superior products to market quicker than its competitors is increasingly the focal point of competition, contend leading product development experts Steven Wheelwright and Kim Clark. Drawing on six years of in-depth, systematic, worldwide research, they present proven principles for developing the critical capabilities for speed, efficiency, and quality that have worked again and again in scores of successful Japanese, American, and European fast-cycle firms. The authors argue that to survive, let alone succeed, today's companies must construct a new "platform" -- with new methodologies -- on which they can compete. Using their model for development strategies, Wheelwright and Clark show that firms can create a solid architecture for the integration of marketing, manufacturing, and design functions for problem solving and fast action -- particularly during the critical design-build-test cycles of prototype creation. They demonstrate further how successful firms such as Honda in automobiles, Compaq in personal computers, Applied Materials in semi-conductors, Sony in audio equipment, The Limited in apparel, and Hill-Rom in hospital beds have employed recent methodologies to bring new products to market at break-neck speed. Such innovations include design for manufacturability, quality function deployment, computer-aided design, and computer-aided engineering. Finally, Wheelwright and Clark emphasize the importance of learning in the organization. Companies that consistently "design it right the first time" and follow a path of continuous improvement in product and process development have a formidable edge in the crucial race to market.

Download or read book New Product Development and Production Networks written by Ulrich Jürgens and published by Springer Science & Business Media. This book was released on 2000-02-03 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prof. Dr. U. Jürgens, Wissenschaftszentrum Berlin, is renown for his scientific work in fields like human resources, work organization and organization of production and development, especially for automotive industries. In this publication the authors from different countries discuss practical models of integration in development and production as realized in practice. Time-to-Market is the key for success, efficient integration of development and production necessary to reach the goal. Jürgens himself acts as a publication editor and creates a book reporting about the state of art in automotive and electronics industry. The publication is directed to scientists and is of interest to those practitioners, who have to develop the benchmarks for their own development and production.

Download or read book Product Design for Modularity written by Ali K. Kamrani and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current marketplace is undergoing an accelerated pace of change that challenges corporations to innovate new techniques to respond rapidly to an ever-changing environment. At the center of this changing environment is a new generation of empowered buyers (customers) equipped with fast evolving technologies that allow them to buy from markets scattered across the globe. Empowering the customers has deprived organizations of what was once their right-to introduce new products slowly, at their own leisure. Organizations used to introduce new products every few years, and, for the most part, products offered limited functionalities and features. A low-priced quality product-irrespective of customer satisfaction-was a guaranteed ticket for success. New global economies and global markets changed business practices and focused on the customer as the major player in the economy. Organizations now fail or succeed based upon their ability to respond quickly to changing customer demands and to utilize new technological innovations. In such an environment, the advantage goes to the firm that can offer greater varieties of new products with higher performance and greater overall appeal. In order to compete in this fast-paced global market, organizations need to produce products that can be easily configured to offer distinctive capabilities compared to the competition. Furthermore, organizations need to develop new methods and techniques to react rapidly to required changes in products and market trends and to shorten the product development cycle, which will enable them to gain more economic competitiveness.

Download or read book Designing the Future How Ford Toyota and other World Class Organizations Use Lean Product Development to Drive Innovation and Transform Their Business written by James M. Morgan and published by McGraw Hill Professional. This book was released on 2018-10-26 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: How companies are using lean development to revolutionize their product and service offerings—vital lessons any business leader can use as an engine of innovationHow did Ford Motors use Lean Development to pull off one of the most impressive corporate turnarounds in history? Largely by avoiding the mistakes that so many companies make when in a death spiral. They looked beyond manufacturing efficiency to change the very fundamentals of how they developed vehicles.In Designing the Future, Lean product development expert James Morgan and world-renowned Lean guru Jeffrey K. Liker reveal why so many companies have achieved only moderate success with Lean in operations, with a limited impact on their overall business. They take you through the process of bringing the best of Lean management to your enterprise—in order to link your business strategy to superior value designed for customers. The authors provide an actionable approach to building a better future for your business fueled by an iterative, integrated process that relies on simultaneous engineering, linking strategy and vision.They illustrate how to empower skilled and talented people to make collaboration and innovation a habit—hour to hour and day to day. It’s the secret of full implementation of Lean—and this groundbreaking guide takes you through every step of the process. The best way to predict the future is to create it. With Designing the Future, you have everything you need to create a flexible, iterative business-transformation process that takes you from strategic vision to value stream creation for maximum customer value delivery.

Download or read book Integrated Product and Process Development written by John M. Usher and published by John Wiley & Sons. This book was released on 1998-03-13 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The phenomenal success of integrated product and process development (IPPD) at such companies as Boeing, Motorola, and Hewlett-Packard has led many manufacturers to place renewed emphasis on this critical aspect of concurrent engineering. If you are among those charged with the daunting task of implementing, upgrading, or maintaining IPPD, you need a single reference/handbook that covers all of the tools, technologies, and applications that support IPPD. You need Integrated Product and Process Development. Emphasizing applications, this extremely user-friendly guide covers everything from basic principles to cutting-edge research. It addresses ideas and methods in product design as well as issues related to process design and manufacturing. Case studies illustrate the application of various tools and techniques of IPPD in manufacturing for the defense industry, making the most of product planning, applications of quality function deployment (QFD), the effective use of design optimization, and integrating design and process planning. Other topics covered include: Identifying customer needs using QFD. Issues and constraints in time-driven product development. Enhancing automated design systems with functional design. Rapid prototyping. Case-based process planning systems

Download or read book Business Information Sources written by Lorna M. Daniells and published by Univ of California Press. This book was released on 1993 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the reference work that librarians and business people have been waiting for--Lorna Daniells's updated guide to selected business books and reference sources. Completely revised, with the best, most recent information available, this edition contains several new sections covering such topics as competitive intelligence, economic and financial measures, and health care marketing. Handbooks, bibliographies, indexes and abstracts, online databases, dictionaries, directories, statistical sources, and periodicals are also included. Speedy access to up-to-date information is essential in the competitive, computerized business world. This classic guide will be indispensable to anyone doing business research today.

Download or read book Food Product Development written by Richard Earle and published by CRC Press. This book was released on 2001-10-09 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Product development, from refining an established product range to developing completely new products, is the lifeblood of the food industry. It is, however, a process fraught with risk, often ending in failure. What are the keys to making the process a success? Based on a wealth of experience gathered over 40 years, Food Product Development provides the answers. After an introductory chapter, the first half of the book considers the four core elements of product development: the overall business strategy which directs product development, the various steps in the product development process itself, the knowledge required to fuel the process and, last but not least, keeping product development focused on consumer needs and aspirations. The second part of the book looks at managing the product development process in practice with four case studies of successful product launches. It also discusses how to evaluate and improve the process to make future product innovation more successful. Filled with examples and practical suggestions, and written by a distinguished team with unrivalled academic and industry expertise, Food Product Development will be an essential guide for R & D and product development staff, and all managers concerned with this key issue throughout the food industry. Mary D. Earle and Richard L. Earle are both Professors Emeritus in Massey University, New Zealand. Mary Earle is a pioneer in product development research, and both she and her husband have worked with industry on numerous product development projects. Allan M. Anderson is Chief Executive of the New Zealand Dairy Research Institute, the central R & D organisation for the New Zealand dairy industry, and has extensive experience of managing successful product development projects.

Download or read book Innovation Product Development and Commercialization written by Dariush Rafinejad and published by J. Ross Publishing. This book was released on 2007-06-15 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title uses a holistic approach to examine the diverse issues that managers face to channel resources in the right direction for commercial success. It details the commercialization of innovation and new products in fast-paced, high-tech markets and how to match tecnological advances to new market opportunities.

Download or read book Engineering and Product Development Management written by Stephen Armstrong and published by Cambridge University Press. This book was released on 2001-09-24 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering and Product Development Management is a practical guide to the components of engineering management, using a holistic approach. It will help engineers and managers understand what they have to do to improve the product development process by deploying new technology and new methods of working in concurrent teams. The book takes elements from six well known and understood bodies of knowledge and integrates them into a holistic approach: integrated product development, project management, process management, systems engineering, product data management, and organizational change management. These elements are framed within an overall enterprise-wide architecture. The techniques discussed in this book work for both huge multinational organizations and smaller enterprises. The emphasis throughout is on practical tools which will be invaluable for engineers, managers, and consultants responsible for project and product development.

Download or read book The Power of Process written by Matthew Zayko and published by CRC Press. This book was released on 2021-10-28 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lean Process Creation teaches the specific frames—the 6CON model—to look through to properly design any new process while optimizing the value-creating resources. The framing is applicable to create any process that involves people, technology, or equipment—whether the application is in manufacturing, healthcare, services, retail, or other industries. If you have a process, this approach will help. The result is 30% to 50% improvement in first-time quality, customer lead time, capital efficiency, labor productivity, and floorspace that could add up to millions of dollars saved per year. More important, it will increase both employee and customer satisfaction. The book details a case study from a manufacturing standpoint, starting with a tangible example to reinforce the 6CON model. This is the first book written from this viewpoint—connecting a realistic transformation with the detailed technical challenges, as well as the engagement of the stakeholders, each with their own bias. Key points and must-do actions are sprinkled throughout the case study to reinforce learning from the specific to the general. In this study, an empowered working team is charged with developing a new production line for a critical new product. As the story unfolds, they create an improved process that saves $5.6 million (10x payback on upfront resource investment) over the short life cycle of the product, as well as other measurable benefits in quality, ergonomics, and delivery. To an even greater benefit, they establish a new way of working that can be applied to all future process creation activities. Some organizations have tried their version of Lean process design following a formula or cookie-cutter approach. But true Lean process design goes well beyond forcing concepts and slogans into every situation. It is purposeful, scientific, and adaptable because every situation starts with a unique current state. In addition, Lean process design must include both the technical and social aspects, as they are essential to sustaining and improving any system. Observing the recurring problem of reworking processes that were newly launched brought the authors to the conclusion that a practical book focused on introducing the critical frames of Lean process creation was needed. This book enables readers to consider the details within each frame that must be addressed to create a Lean process. No slogans, no absolutes. Real thinking is required. This type of thinking is best learned from an example, so the authors provide this case study to demonstrate the thinking that should be applied to any process. High volume or low, simple or complex mix, manufacturing or service/transactional—the framing and thinking works. Along with the thinking, readers are enabled to derive their own future states. This is demonstrated in the story that surrounds the case study.

Download or read book Managing the Design Factory written by Donald Reinertsen and published by Simon and Schuster. This book was released on 1997-10 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the bestselling author of Developing Products in Half the Time, this book presents a comprehensive approach to managing design-in-process inventory.