Download or read book Management and Minimisation of Uncertainties and Errors in Numerical Aerodynamics written by Bernhard Eisfeld and published by Springer Science & Business Media. This book was released on 2013-02-11 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reports results from the German research initiative MUNA (Management and Minimization of Errors and Uncertainties in Numerical Aerodynamics), which combined development activities of the German Aerospace Center (DLR), German universities and German aircraft industry. The main objective of this five year project was the development of methods and procedures aiming at reducing various types of uncertainties that are typical of numerical flow simulations. The activities were focused on methods for grid manipulation, techniques for increasing the simulation accuracy, sensors for turbulence modelling, methods for handling uncertainties of the geometry and grid deformation as well as stochastic methods for quantifying aleatoric uncertainties.

Download or read book Uncertainty Management for Robust Industrial Design in Aeronautics written by Charles Hirsch and published by Springer. This book was released on 2018-07-21 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers cutting-edge findings related to uncertainty quantification and optimization under uncertainties (i.e. robust and reliable optimization), with a special emphasis on aeronautics and turbomachinery, although not limited to these fields. It describes new methods for uncertainty quantification, such as non-intrusive polynomial chaos, collocation methods, perturbation methods, as well as adjoint based and multi-level Monte Carlo methods. It includes methods for characterization of most influential uncertainties, as well as formulations for robust and reliable design optimization. A distinctive element of the book is the unique collection of test cases with prescribed uncertainties, which are representative of the current engineering practice of the industrial consortium partners involved in UMRIDA, a level 1 collaborative project within the European Commission's Seventh Framework Programme (FP7). All developed methods are benchmarked against these industrial challenges. Moreover, the book includes a section dedicated to Best Practice Guidelines for uncertainty quantification and robust design optimization, summarizing the findings obtained by the consortium members within the UMRIDA project. All in all, the book offers a authoritative guide to cutting-edge methodologies for uncertainty management in engineering design, covers a wide range of applications and discusses new ideas for future research and interdisciplinary collaborations.

Download or read book New Results in Numerical and Experimental Fluid Mechanics X written by Andreas Dillmann and published by Springer. This book was released on 2016-03-28 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents contributions to the 19th biannual symposium of the German Aerospace Aerodynamics Association (STAB) and the German Society for Aeronautics and Astronautics (DGLR). The individual chapters reflect ongoing research conducted by the STAB members in the field of numerical and experimental fluid mechanics and aerodynamics, mainly for (but not limited to) aerospace applications, and cover both nationally and EC-funded projects. Special emphasis is given to collaborative research projects conducted by German scientists and engineers from universities, research-establishments and industries. By addressing a number of cutting-edge applications, together with the relevant physical and mathematics fundamentals, the book provides readers with a comprehensive overview of the current research work in the field. Though the book’s primary emphasis is on the aerospace context, it also addresses further important applications, e.g. in ground transportation and energy.

Download or read book New Results in Numerical and Experimental Fluid Mechanics XIV written by Andreas Dillmann and published by Springer Nature. This book was released on 2023-10-24 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers timely insights into research on numerical and experimental fluid mechanics and aerodynamics, mainly for (but not limited to) aerospace applications. It reports on findings by members of the Deutsche Strömungsmechanische Arbeitsgemeinschaft, STAB (German Aerodynamics/Fluid Mechanics Association) and the Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal Oberth e.V., DGLR (German Society for Aeronautics and Astronautics) and covers both nationally and EC-funded projects. Continuing on the tradition of the previous volumes, the book highlights innovative solutions, promoting translation from fundamental research to industrial applications. It addresses academics and professionals in the field of aeronautics, astronautics, ground transportation, and energy alike.

Download or read book AeroStruct Enable and Learn How to Integrate Flexibility in Design written by Ralf Heinrich and published by Springer. This book was released on 2018-01-30 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the German research initiative AeroStruct, a three-year collaborative project between universities and the aircraft industry. It describes the development of an integrated multidisciplinary simulation environment for aircraft analysis and optimization using high-fidelity methods. This system is able to run at a high level of automatism, thus representing a step forward with respect to previous ones. Its special features are: a CAD description that is independent from the disciplines involved, an automated CFD mesh generation and an automated structure model generation including a sizing process. The book also reports on test cases by both industrial partners and DLR demonstrating the advantages of the new environment and its suitability for the industry. These results were also discussed during the AeroStruct closing Symposium, which took place on 13-14 October 2015 at the DLR in Braunschweig, Germany. The book provides expert readers with a timely report on multidisciplinary aircraft design and optimization. Thanks to a good balance between theory and practice, it is expected to address an audience of both academics and professional, and to offer them new ideas for future research and development.

Download or read book New Results in Numerical and Experimental Fluid Mechanics IX written by Andreas Dillmann and published by Springer Science & Business Media. This book was released on 2014-01-25 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents contributions to the 18th biannual symposium of the German Aerospace Aerodynamics Association (STAB). The individual chapters reflect ongoing research conducted by the STAB members in the field of numerical and experimental fluid mechanics and aerodynamics, mainly for (but not limited to) aerospace applications, and cover both nationally and EC-funded projects. By addressing a number of essential research subjects, together with their related physical and mathematics fundamentals, the book provides readers with a comprehensive overview of the current research work in the field, as well as its main challenges and new directions. Current work on e.g. high aspect-ratio and low aspect-ratio wings, bluff bodies, laminar flow control and transition, active flow control, hypersonic flows, aeroelasticity, aeroacoustics and biofluid mechanics is exhaustively discussed here.

Download or read book Sparse Grids and Applications Munich 2018 written by Hans-Joachim Bungartz and published by Springer Nature. This book was released on 2022-03-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sparse grids are a popular tool for the numerical treatment of high-dimensional problems. Where classical numerical discretization schemes fail in more than three or four dimensions, sparse grids, in their different flavors, are frequently the method of choice. This volume of LNCSE presents selected papers from the proceedings of the fifth workshop on sparse grids and applications, and demonstrates once again the importance of this numerical discretization scheme. The articles present recent advances in the numerical analysis of sparse grids in connection with a range of applications including uncertainty quantification, plasma physics simulations, and computational chemistry, to name but a few.

Download or read book International Assessment of Research and Development in Simulation based Engineering and Science written by Sharon C. Glotzer and published by World Scientific. This book was released on 2011 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation-Based Engineering and Science (SBE&S) cuts across disciplines, showing tremendous promise in areas from storm prediction and climate modeling to understanding the brain and the behavior of numerous other complex systems.In this groundbreaking volume, nine distinguished leaders assess the latest research trends, as a result of 52 site visits in Europe and Asia and hundreds of hours of expert interviews, and discuss the implications of their findings for the US government.The authors conclude that while the US remains the quantitative leader in SBE&S research and development, it is very much in danger of losing that edge to Europe and Asia.Commissioned by the National Science Foundation, this multifaceted study will capture the attention of Fortune 500 companies and policymakers.Distinguished contributors: Sharon C Goltzer, University of Michigan, Ann Arbor, USA Sangtae Kim, Morgridge Institute for Research, USA Peter T Cummings, Vanderbilt University, USA and Oak Ridge National Laboratory, USA Abhijit Deshmukh, Texas A&M University, USA Martin Head-Gordon, University of California, Berkeley, USA George Em Karniadakis, Brown University, USA Linda Petzold, University of California, Santa Barbara, USA Celeste Sagui, North Carolina State University, USA Masanobu Shinozuka, University of California, Irvine, USA

Download or read book Needs and Opportunities for Uncertainty Based Multidisciplinary Design Methods for Aerospace Vehicles written by and published by . This book was released on 2002 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aerodynamics of Wind Tunnel Circuits and Their Components written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Fluid Dynamics Panel. Symposium and published by . This book was released on 1997 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1978 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aeronautical Technologies for the Twenty first Century written by National Research Council (U.S.). Committee on Aeronautical Technologies and published by . This book was released on 1992 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory

Download or read book Space debris and space traffic management symposium 2005 written by Joerg Bendisch and published by . This book was released on 2006 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Low Speed Wind Tunnel Testing written by Jewel B. Barlow and published by John Wiley & Sons. This book was released on 1999-02-22 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brand-new edition of the classic guide on low-speed wind tunnel testing While great advances in theoretical and computational methods have been made in recent years, low-speed wind tunnel testing remains essential for obtaining the full range of data needed to guide detailed design decisions for many practical engineering problems. This long-awaited Third Edition of William H. Rae, Jr.'s landmark reference brings together essential information on all aspects of low-speed wind tunnel design, analysis, testing, and instrumentation in one easy-to-use resource. Written by authors who are among the most respected wind tunnel engineers in the world, this edition has been updated to address current topics and applications, and includes coverage of digital electronics, new instrumentation, video and photographic methods, pressure-sensitive paint, and liquid crystal-based measurement methods. The book is organized for quick access to topics of interest, and examines basic test techniques and objectives of modeling and testing aircraft designs in low-speed wind tunnels, as well as applications to fluid motion analysis, automobiles, marine vessels, buildings, bridges, and other structures subject to wind loading. Supplemented with real-world examples throughout, Low-Speed Wind Tunnel Testing, Third Edition is an indispensable resource for aerospace engineering students and professionals, engineers and researchers in the automotive industries, wind tunnel designers, architects, and others who need to get the most from low-speed wind tunnel technology and experiments in their work.

Download or read book Flight Stability and Automatic Control written by Robert C. Nelson and published by . This book was released on 1998 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of this this flight stability and controls guide features an unintimidating math level, full coverage of terminology, and expanded discussions of classical to modern control theory and autopilot designs. Extensive examples, problems, and historical notes, make this concise book a vital addition to the engineer's library.