Download or read book Major Applications of Carbon Nanotube Field Effect Transistors CNTFET written by Raj, Balwinder and published by IGI Global. This book was released on 2019-12-06 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: With recent advancements in electronics, specifically nanoscale devices, new technologies are being implemented to improve the properties of automated systems. However, conventional materials are failing due to limited mobility, high leakage currents, and power dissipation. To mitigate these challenges, alternative resources are required to advance electronics further into the nanoscale domain. Carbon nanotube field-effect transistors are a potential solution yet lack the information and research to be properly utilized. Major Applications of Carbon Nanotube Field-Effect Transistors (CNTFET) is a collection of innovative research on the methods and applications of converting semiconductor devices from micron technology to nanotechnology. The book provides readers with an updated status on existing CNTs, CNTFETs, and their applications and examines practical applications to minimize short channel effects and power dissipation in nanoscale devices and circuits. While highlighting topics including interconnects, digital circuits, and single-wall CNTs, this book is ideally designed for electrical engineers, electronics engineers, students, researchers, academicians, industry professionals, and practitioners working in nanoscience, nanotechnology, applied physics, and electrical and electronics engineering.
Download or read book Major Applications of Carbon Nanotube Field effect Transistors CNTFET written by Balwinder Raj and published by Engineering Science Reference. This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book explores the methods and applications of converting semiconductor devices from micron technology to nanotechnology. It also examines existing CNTs, CNTFETs, and their applications and examines practical applications to minimize short channel effects and power dissipation in nanoscale devices and circuits" --
Download or read book Major Applications of Carbon Nanotube Field Effect Transistors CNTFET written by and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: With recent advancements in electronics, specifically nanoscale devices, new technologies are being implemented to improve the properties of automated systems. However, conventional materials are failing due to limited mobility, high leakage currents, and power dissipation. To mitigate these challenges, alternative resources are required to advance electronics further into the nanoscale domain. Carbon nanotube field-effect transistors are a potential solution yet lack the information and research to be properly utilized. Major Applications of Carbon Nanotube Field-Effect Transistors (CNTFET) is a collection of innovative research on the methods and applications of converting semiconductor devices from micron technology to nanotechnology. The book provides readers with an updated status on existing CNTs, CNTFETs, and their applications and examines practical applications to minimize short channel effects and power dissipation in nanoscale devices and circuits. While highlighting topics including interconnects, digital circuits, and single-wall CNTs, this book is ideally designed for electrical engineers, electronics engineers, students, researchers, academicians, industry professionals, and practitioners working in nanoscience, nanotechnology, applied physics, and electrical and electronics engineering.
Download or read book Carbon Nanotube Electronics written by Ali Javey and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete overview of the field of carbon nanotube electronics. It covers materials and physical properties, synthesis and fabrication processes, devices and circuits, modeling, and finally novel applications of nanotube-based electronics. The book introduces fundamental device physics and circuit concepts of 1-D electronics. At the same time it provides specific examples of the state-of-the-art nanotube devices.
Download or read book Nanowelded Carbon Nanotubes written by Changxin Chen and published by Springer Science & Business Media. This book was released on 2009-08-26 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a novel ultrasonic nanowelding technology of carbon nanotubes (CNTs) to metal electrodes and its application for CNT devices. It will be of interest to graduates, scientists and engineers working on CNTs and related topics.
Download or read book Carbon Nanotube Devices written by and published by John Wiley & Sons. This book was released on 2008-05-05 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following on from the first AMN volume, this handy reference and textbook examines the topic of nanosystem design in further detail. It explains the physical and chemical basics behind the design and fabrication of nanodevices, covering all important, recent advances in the field, while introducing nanosystems to less experienced readers. The result is an important source for a fast, accurate overview of the state of the art of nanosystem realization, summarizing further important literature.
Download or read book Carbon Based Electronics written by Ashok Srivastava and published by CRC Press. This book was released on 2015-03-19 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovery of one-dimensional material carbon nanotubes in 1991 by the Japanese physicist Dr. Sumio Iijima has resulted in voluminous research in the field of carbon nanotubes for numerous applications, including possible replacement of silicon used in the fabrication of CMOS chips. One interesting feature of carbon nanotubes is that these can be me
Download or read book Carbon Nanotubes written by Prasanta Ghosh and published by BoD – Books on Demand. This book was released on 2021-10-13 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes - Redefining the World of Electronics is a compendium of current, state-of-the-art information about carbon nanotubes (CNTs) and their potential applications in electronics. Chapters cover such topics as the incorporation of CNTs into electronic devices, CNT-based rubber composites for electronic components, the role of CNTs in different energy storage and conversion systems, and ternary implementations of carbon nanotube field-effect transistor (CNTFET) circuits.
Download or read book Carbon Nanotube Field Effect Transistors for Power Application written by Tao Pan (S.M.) and published by . This book was released on 2007 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are nanometer-diameter cylinders formed from rolled-up graphene sheets which have found widespread interests due to their many excellent electrical properties. In particular, most of them are direct bandgap semiconductors from which carbon nanotube field effect transistors (CNTFETs) can be made. The small feature size and high electron mobility of the CNT makes it attractive and a good candidate to replace modern MOSFETs. So far, most fabricated CNTFETs conduct currents only on the order of microamps under low voltage bias which cannot be used to drive large output loads. In this work, we attempt to explore the ultimate performance benefits from utilizing multiple CNTs for CNTFETs. Two ways of making multi-tube CNTFETs are demonstrated in this thesis. Devices are fabricated, measured and analyzed. A simple model is used to evaluate the ideal ballistic behavior of CNTFETs. Parasitics that are measured from experiments and extracted from numerical tools are added to the model. As an application, we compare the performance of CNTFETs with MOSFETs, both used as power transistors in a Buck DC-DC converter circuit.
Download or read book Nanotubes and Nanowires written by Peter John Burke and published by World Scientific. This book was released on 2007 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of nanotubes and nanowires is evolving at a rapid pace, with many potential applications in electronics, optics, and sensors, to name a few. In this book, various prominent researchers summarize our current understanding of these new materials systems, as well as some of these potential applications. A snapshot of the state-of-the-art in the field of nanowires and nanotubes, the contributions give an instructive mix of experimental, theoretical, and visionary material to give the reader an indication of where the field is now, and where it is going. With several points of view represented, including academic theoreticians, academic experimental device engineers, and industry researchers from well-known semiconductor companies, Nanotubes and Nanowires is an essential source of reference for physicists, chemists, materials scientists, and graduate students interested in keeping abreast of the latest developments in nanotechnology.
Download or read book Carbon Nanotubes written by Stephanie Reich and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are exceptionally interesting from a fundamental research point of view. Many concepts of one-dimensional physics have been verified experimentally such as electron and phonon confinement or the one-dimensional singularities in the density of states; other 1D signatures are still under debate, such as Luttinger-liquid behavior. Carbon nanotubes are chemically stable, mechanically very strong, and conduct electricity. For this reason, they open up new perspectives for various applications, such as nano-transistors in circuits, field-emission displays, artificial muscles, or added reinforcements in alloys. This text is an introduction to the physical concepts needed for investigating carbon nanotubes and other one-dimensional solid-state systems. Written for a wide scientific readership, each chapter consists of an instructive approach to the topic and sustainable ideas for solutions. The former is generally comprehensible for physicists and chemists, while the latter enable the reader to work towards the state of the art in that area. The book gives for the first time a combined theoretical and experimental description of topics like luminescence of carbon nanotubes, Raman scattering, or transport measurements. The theoretical concepts discussed range from the tight-binding approximation, which can be followed by pencil and paper, to first-principles simulations. We emphasize a comprehensive theoretical and experimental understanding of carbon nanotubes including - general concepts for one-dimensional systems - an introduction to the symmetry of nanotubes - textbook models of nanotubes as narrow cylinders - a combination of ab-initio calculations and experiments - luminescence excitation spectroscopy linked to Raman spectroscopy - an introduction to the 1D-transport properties of nanotubes - effects of bundling on the electronic and vibrational properties and - resonance Raman scattering in nanotubes.
Download or read book Carbon Nanotubes written by Jose Mauricio Marulanda and published by BoD – Books on Demand. This book was released on 2011-08-01 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs), discovered in 1991, have been a subject of intensive research for a wide range of applications. In the past decades, although carbon nanotubes have undergone massive research, considering the success of silicon, it has, nonetheless, been difficult to appreciate the potential influence of carbon nanotubes in current technology. The main objective of this book is therefore to give a wide variety of possible applications of carbon nanotubes in many industries related to electron device technology. This should allow the user to better appreciate the potential of these innovating nanometer sized materials. Readers of this book should have a good background on electron devices and semiconductor device physics as this book presents excellent results on possible device applications of carbon nanotubes. This book begins with an analysis on fabrication techniques, followed by a study on current models, and it presents a significant amount of work on different devices and applications available to current technology.
Download or read book The gm ID Methodology a sizing tool for low voltage analog CMOS Circuits written by Paul Jespers and published by Springer Science & Business Media. This book was released on 2009-12-01 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: IC designers appraise currently MOS transistor geometries and currents to compromise objectives like gain-bandwidth, slew-rate, dynamic range, noise, non-linear distortion, etc. Making optimal choices is a difficult task. How to minimize for instance the power consumption of an operational amplifier without too much penalty regarding area while keeping the gain-bandwidth unaffected in the same time? Moderate inversion yields high gains, but the concomitant area increase adds parasitics that restrict bandwidth. Which methodology to use in order to come across the best compromise(s)? Is synthesis a mixture of design experience combined with cut and tries or is it a constrained multivariate optimization problem, or a mixture? Optimization algorithms are attractive from a system perspective of course, but what about low-voltage low-power circuits, requiring a more physical approach? The connections amid transistor physics and circuits are intricate and their interactions not always easy to describe in terms of existing software packages. The gm/ID synthesis methodology is adapted to CMOS analog circuits for the transconductance over drain current ratio combines most of the ingredients needed in order to determine transistors sizes and DC currents.
Download or read book Tunnel Field effect Transistors TFET written by Jagadesh Kumar Mamidala and published by John Wiley & Sons. This book was released on 2016-09-27 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into Tunneling Field Effect Transistors (TFETs) has developed significantly in recent times, indicating their significance in low power integrated circuits. This book describes the qualitative and quantitative fundamental concepts of TFET functioning, the essential components of the problem of modelling the TFET, and outlines the most commonly used mathematical approaches for the same in a lucid language. Divided into eight chapters, the topics covered include: Quantum Mechanics, Basics of Tunneling, The Tunnel FET, Drain current modelling of Tunnel FET: The task and its challenges, Modeling the Surface Potential in TFETs, Modelling the Drain Current, and Device simulation using Technology Computer Aided Design (TCAD). The information is well organized, describing different phenomena in the TFETs using simple and logical explanations. Key features: * Enables readers to understand the basic concepts of TFET functioning and modelling in order to read, understand, and critically analyse current research on the topic with ease. * Includes state-of-the-art work on TFETs, attempting to cover all the recent research articles published on the subject. * Discusses the basic physics behind tunneling, as well as the device physics of the TFETs. * Provides detailed discussion on device simulations along with device physics so as to enable researchers to carry forward their study on TFETs. Primarily targeted at new and practicing researchers and post graduate students, the book would particularly be useful for researchers who are working in the area of compact and analytical modelling of semiconductor devices.
Download or read book Carbon Nanomaterial Electronics Devices and Applications written by Arnab Hazra and published by Springer Nature. This book was released on 2021-05-22 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together selective and specific chapters on nanoscale carbon and applications, thus making it unique due to its thematic content. It provides access to the contemporary developments in carbon nanomaterial research in electronic applications. Written by professionals with thorough expertise in similar broad area, the book is intended to address multiple aspects of carbon research in a single compiled edition. It targets professors, scientists and researchers belonging to the areas of physics, chemistry, engineering, biology and medicine, and working on theory, experiment and applications of carbon nanomaterials.
Download or read book Carbon Nanotube and Graphene Device Physics written by H.-S. Philip Wong and published by Cambridge University Press. This book was released on 2011 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first introductory textbook to explain the properties and performance of practical nanotube devices and related applications.
Download or read book Ternary Digital System written by A P Dhande and published by SM Online Publishers LLC. This book was released on 2014-10-01 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ternary digital system is commonly known as three valued digital system.Three valued logic is an elementary set of Multiple Valued Logic, which is introduced in the book at the beginning. The book provides a detail overview of every concept required for the design and applications of ternary circuits. It covers the basic concepts for ternary logic fundamentals,ternary logic gates, its logic gate truth tables, Boolean rules for ternary logic up to ternary logic families, function synthesis and minimization techniques and an applications like one trit T-ALU, Two trit T-ALU Slice, Ternary R-S and D memory elements and an analog to ternary converter for DSP application as a fundamental block are developed and simulated using EDA tool. Finally computer simulation using EDA (Electronic Design Automation) tools like Tanner, spice and VHDL is also illustrated. In the first half of 19 th century G.Boolean have proposed the Algebra for two valued (Binary logic) system after that Shanon has expressed the behavior of electrical switches in terms of Boolean algebra and he paved the ramp to an industrial development that is recognized as initiating one of the most revolutionary economic changes ever. MVL is also known as Multi-Valued, Multiple-Valued or Many-Valued logic. Multi-Value logic is regarded as a switch with more than two states. Such as a 3- value switch with states ‘0’, ‘1’ and ‘2’. Or a 4-value switch with states ‘0’, ‘1’, ‘2’ and ‘3’. In case of 3-Valued logic the term ternary logic is used & term quaternary logic for 4-Valued logic. Alexander (1964) showed that the most efficient radix for implementation of switching systems is the natural base (e ≈2.71828), it seems likely that the best integral radix is 3 rather than 2.It should be noted that this book emphasis on Ternary logic with concepts and applications. The fundamental work on Multiple Valued Logic (MVL) System was done by E.L.Post in the beginning of 19 th centuries and based on that work P.C.Rosen Bloom modeled the Algebra for MVL is called Post Algebra.
