EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Magnetic Measurement Data of the 0 8 m Prototype Quadrupole Magnets for the APS Storage Ring

Download or read book Magnetic Measurement Data of the 0 8 m Prototype Quadrupole Magnets for the APS Storage Ring written by and published by . This book was released on 1995 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: From magnetic measurement data of the two 0.8-m prototype quadrupole magnets (P-SRQ-1 and P-SRQ-2) and the study of the geometries for the pole-end bevels and pole chamfers, the following conclusions have been made. Mechanical stability of the magnet poles has been achieved by modification of the weld procedures between two quadrants of the magnets. Stability of the magnet-pole positions was measured optically and was also concluded from the fact that the allowed coefficients, mainly sextupole and octupole terms, were independent of the magnet excitation currents. Unallowed multipole field coefficients for the second magnet, without correction of the magnet-pole positions, are smaller than for the first magnet. The field gradient integrals of the two magnets at 400A differ by less than 5 x 10−4 for r = 2.5 cm. This indicates that an acceptable magnet assembly procedure has been established. The 2-D calculations and ''body'' measurements for allowed coefficients after the main field, b5 and b9, agree within 1.2 x 10−4 at r = 2.5 cm. This implies that the 2-D design geometry is basically correct and acceptable. As expected for a magnet with long and narrow poles, saturation effects of pole shims have been observed. In order to reduce fabrication cost for the end-plates, the geometries for the pole-end bevels and pole chamfers have been studied. By choosing a bevel angle of 61°, instead of 45°, it is possible to have acceptable allowed coefficients with dimensions of pole-chamfers up to 16.5 mm. This allows the design of the end-plate as one piece without removable pole-tip.

Book Computation of a Quadrupole Magnet for the APS Storage Ring

Download or read book Computation of a Quadrupole Magnet for the APS Storage Ring written by and published by . This book was released on 1990 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The storage ring of the Advanced Photon Source will include 400 quadrupole magnets for focusing the beam. A prototype quadrupole has been designed, constructed, and measured. This paper describes the two- and three-dimensional (2-D and 3-D) field computations performed for this design. 2 refs., 6 figs., 1 tab.

Book Vibration Study of the APS Storage Ring 0  8 Meter Quadrupole Magnet

Download or read book Vibration Study of the APS Storage Ring 0 8 Meter Quadrupole Magnet written by and published by . This book was released on 1991 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this study are as follows: Determine the vibration characteristics (frequency, damping, and mode shapes) of the magnet on prototypic supports (the actual mounting system used to mount the magnet on the girder). Measure system response to ambient floor motion. Measure the effect of various modifications to determine if the magnet response can be modified to minimize unwanted response characteristics. Modifications investigated include support schemes, increasing system damping, and increasing mechanical rigidity. Measure system response to coolant flow. Determine vibrational characteristics of a large concrete block placed on a concrete floor, including response to ambient floor motions.

Book Fabrication and Tests of Prototype Quadrupole Magnets for the Storage Ring of the Advanced Photon Source

Download or read book Fabrication and Tests of Prototype Quadrupole Magnets for the Storage Ring of the Advanced Photon Source written by and published by . This book was released on 1991 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prototype quadrupole magnets for the APS storage ring have been fabricated and tested. Mechanical stability of the magnet poles and acceptable field quality have been achieved. Geometries of the pole-end bevels have been studied in order to simplify the design of the magnet end-plate. The field saturation at different segments of the magnet has been measured to evaluate the magnet efficiency. 3 refs., 4 figs., 2 tabs.

Book Magnetic Measurements of the Storage Ring Quadrupole Magnets for the 7 GeV Advanced Photon Source

Download or read book Magnetic Measurements of the Storage Ring Quadrupole Magnets for the 7 GeV Advanced Photon Source written by and published by . This book was released on 1993 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pre-production quadrupole magnet for the Advanced Photon Source (APS) storage ring has been used. The multipole coefficients meet the tolerance requirements. The field-gradient integrals are measured relative to a reference quadrupole. By using two laser beam units, the magnetic and geometrical axes of the magnet are aligned within 0.2 mrad. The dependencies of the sextupole coefficient and the magnetic center on the excitation current are corrected by shunting the magnetic potentials of the top and bottom yokes.

Book Quadrupole Magnet for the APS  Advanced Photon Source  Storage Ring

Download or read book Quadrupole Magnet for the APS Advanced Photon Source Storage Ring written by and published by . This book was released on 1989 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: An asymmetric core geometry has been selected for the quadrupole magnets in the storage ring of the Advanced Photon Source (APS) in order to accommodate the vacuum chamber and photon beam pipes. The requirements of the position beam make it necessary that the magnet be able to produce a field gradient of 20-T/m with high accuracy. The design for this magnet has been fully developed in preparation for the construction of a prototype. Some unique features included in the design are described. Design choices are being validated by extensive magnetic-field calculations in both two and three dimensions. The results of these calculations are presented. 6 refs., 4 figs., 5 tabs.

Book Vibration Study of the APS Storage Ring 0 8 Meter Quadrupole Magnet

Download or read book Vibration Study of the APS Storage Ring 0 8 Meter Quadrupole Magnet written by J.A. Jendrzeijczyk and published by . This book was released on 1991 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Statistical Analyses of the Magnet Data for the Advanced Photon Source Storage Ring Magnets

Download or read book Statistical Analyses of the Magnet Data for the Advanced Photon Source Storage Ring Magnets written by and published by . This book was released on 1995 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The statistics of the measured magnetic data of 80 dipole, 400 quadrupole, and 280 sextupole magnets of conventional resistive designs for the APS storage ring is summarized. In order to accommodate the vacuum chamber, the curved dipole has a C-type cross section and the quadrupole and sextupole cross sections have 180° and 120° symmetries, respectively. The data statistics include the integrated main fields, multipole coefficients, magnetic and mechanical axes, and roll angles of the main fields. The average and rms values of the measured magnet data meet the storage ring requirements.

Book Computation of a Quadrupole Magnet for the APS Storage Ring

Download or read book Computation of a Quadrupole Magnet for the APS Storage Ring written by and published by . This book was released on 1990 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Design and Measurement of the Sextupole Magnet for the APS Storage Rings

Download or read book Design and Measurement of the Sextupole Magnet for the APS Storage Rings written by and published by . This book was released on 1993 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: A prototype sextuple magnet has been designed, constructed, and measured for the storage ring of the Advanced Photon Source. The design approaches very closely to 120° rotation symmetry, in order to minimize all forbidden multipole components. The core is made of three identical stacks of laminations, each lamination consisting of two poles and the return yoke joining them. The antechamber of the thick aluminum vacuum chamber fits between two neighboring stacks. Computations and measurements of the sextupole strength B′′ and multipole field components, both in the central region and integrated in the beam direction, show that the magnets meets the requirements for positron beam dynamics.

Book Government Reports Announcements   Index

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1996 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Design and Measurement of the Sextupole Magnet for the APS Storage Ring

Download or read book Design and Measurement of the Sextupole Magnet for the APS Storage Ring written by and published by . This book was released on 1993 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Performance of Quadrupole and Sextupole Magnets for the Advanced Photon Source Storage Ring

Download or read book Performance of Quadrupole and Sextupole Magnets for the Advanced Photon Source Storage Ring written by and published by . This book was released on 1993 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the magnetic measurement data of several production quadrupole and sextupole magnets for the storage ring of the Advanced Photon Source, the excitation efficiencies and systematic and random multipole coefficients of the magnets are summarized. The designs of the magnets, which are constrained due to the geometry of the vacuum chamber have rotation symmetries of 180° and 120°. The production data meet the allowed tolerances of a few parts in 10−4 for the storage ring.

Book The Engineering Index Annual

Download or read book The Engineering Index Annual written by and published by . This book was released on 1992 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.