Download or read book Fundamentals of Magnesium Alloy Metallurgy written by Mihriban O Pekguleryuz and published by Elsevier. This book was released on 2013-03-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium and magnesium alloys offer a wealth of valuable properties, making them of great interest for use across a wide range of fields. This has led to extensive research focused on understanding the properties of magnesium and how these can be controlled during processing. Fundamentals of magnesium alloy metallurgy presents an authoritative overview of all aspects of magnesium alloy metallurgy, including physical metallurgy, deformation, corrosion and applications.Beginning with an introduction to the primary production of magnesium, the book goes on to discuss physical metallurgy of magnesium and thermodynamic properties of magnesium alloys. Further chapters focus on understanding precipitation processes of magnesium alloys, alloying behaviour of magnesium, and alloy design. The formation, corrosion and surface finishing of magnesium and its alloys are reviewed, before Fundamentals of magnesium alloy metallurgy concludes by exploring applications across a range of fields. Aerospace, automotive and other structural applications of magnesium are considered, followed by magnesium-based metal matrix composites and the use of magnesium in medical applications.With its distinguished editors and international team of expert contributors, Fundamentals of magnesium alloy metallurgy is a comprehensive tool for all those involved in the production and application of magnesium and its alloys, including manufacturers, welders, heat-treatment and coating companies, engineers, metallurgists, researchers, designers and scientists working with these important materials. Overviews all aspects of magnesium alloy metallurgy Discusses physical metallurgy of magnesium and thermodynamic properties of magnesium alloys Reviews the formation, corrosion and surface finishing of magnesium and its alloys

Download or read book ASM Specialty Handbook written by M. M. Avedesian and published by ASM International. This book was released on 1999-01-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ASM Handbook is the most comprehensive collection of engineering information on this important structural material published in the last sixty years. Prepared with the cooperation of the International Magnesium Association, it presents the current industrial practices and provides information and data about the properties and performance of magnesium alloys. Materials science and engineering are covered, including processing, properties, and commercial uses.

Download or read book Magnesium Magnesium Alloys and Magnesium Composites written by Manoj Gupta and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: A look at the current and future uses of magnesium-based products and their role in the world's environmental and technological revolution The lightest of all structural metals, having one-fourth the density of steel and two-thirds that of aluminum, magnesium has already been adopted as an alternative construction material in applications as far ranging as automotive and sports equipment, electronics, and space technology. In a world concerned with minimizing the environmental impact of products, the choice of light-weight, energy-saving, and high-performance materials, like magnesium, would seem a small, significant step towards improving life on this planet. Magnesium, Magnesium Alloys, and Magnesium Composites introduces the science and current applications of this important metal, shedding light on the magnesium-based composites developed over the last fifteen years. Chapters include in-depth discussion of: The characteristics of pure magnesium—including atomic properties and crystal structure as well as physical, electrical, and mechanical properties Magnesium alloys—and the effects of the alloying elements, such as aluminum, lithium, copper, nickel, and silicon The properties of magnesium-based composites—and the effects of different types (metallic, ceramic, interconnected, and intermetallic) of reinforcements of varying length (from micron scale to nanometric length) Corrosion aspects of magnesium-based materials Magnesium-based products in medicine, sports equipment, and the automotive, aerospace, and electronics industries Bringing together, for the first time, the science, properties, and technologies relating to the current and future uses of magnesium, this important reference also offers readers a glimpse of a not-too-distant world in which environmental safety and sound engineering are a reality.

Download or read book Corrosion of Magnesium Alloys written by G L Song and published by Woodhead Publishing. This book was released on 2011-03-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of magnesium alloys is increasing in a range of applications, and their popularity is growing wherever lightweight materials are needed. This book provides a comprehensive account of the corrosion of magnesium alloys. It covers not only the corrosion performances and mechanisms of Mg alloys in conventional environments, such as sodium chloride solutions, but also looks at their corrosion behaviours in special media, like engine coolants and simulated body fluids. Part one covers fundamentals such as the corrosion electrochemistry, activity and passivity of magnesium and its alloys. Part two then considers the metallurgical effect in relation to the corrosion of magnesium alloys, including the role of micro-structure and earth-rare elements, the corrosion behaviour of magnesium-based bulk metallic glasses, and the corrosion of innovative magnesium alloys. Part three goes on to describe environmental influences on the corrosion of magnesium alloys, such as atmospheric corrosion, stress corrosion cracking, creep and fatigue behaviour, and galvanic corrosion. Finally, part four is concerned with various means of protecting magnesium alloys against corrosion through the use of aluminium electrodeposition, conversion and electrophoretic coatings, and anodisation. With its distinguished editor and team of contributors, this book is an invaluable resource for metallurgists, engineers and designers working with magnesium and its alloys, as well as professionals in the aerospace and automotive industries.

Download or read book Magnesium Alloys and Their Applications written by Barry L. Mordike and published by . This book was released on 1998 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Magnesium Alloys and Technologies written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for light-weight materials, especially in the automobile industry, created renewed interest in innovative applications of magnesium materials. This demand has resulted in increased research and development activity in companies and research institutes in order to achieve an improved property profile and better choice of alloy systems. Here, development trends and application potential in different fields like the automotive industry and communication technology are discussed in an interdisciplinary framework.

Download or read book Magnesium Alloys Containing Rare Earth Metals written by L.L. Rokhlin and published by CRC Press. This book was released on 2003-02-20 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium-based alloys containing rare-earth metals are important structural materials, as they combine low density with high-strength properties. This makes them particularly attractive for industry, especially in cases where the low weight of constructions is critical, as in aircraft and space apparatus construction. One of the remarkable feature

Download or read book Corrosion Resistance of Aluminum and Magnesium Alloys written by Edward Ghali and published by John Wiley & Sons. This book was released on 2010-05-05 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valuable information on corrosion fundamentals and applications of aluminum and magnesium Aluminum and magnesium alloys are receiving increased attention due to their light weight, abundance, and resistance to corrosion. In particular, when used in automobile manufacturing, these alloys promise reduced car weights, lower fuel consumption, and resulting environmental benefits. Meeting the need for a single source on this subject, Corrosion Resistance of Aluminum and Magnesium Alloys gives scientists, engineers, and students a one-stop reference for understanding both the corrosion fundamentals and applications relevant to these important light metals. Written by a world leader in the field, the text considers corrosion phenomena for the two metals in a systematic and parallel fashion. The coverage includes: The essentials of corrosion for aqueous, high temperature corrosion, and active-passive behavior of aluminum and magnesium alloys The performance and corrosion forms of aluminum alloys The performance and corrosion forms of magnesium alloys Corrosion prevention methods such as coatings for aluminum and magnesium Electrochemical methods of corrosion investigation and their application to aluminum and magnesium alloys Offering case studies and detailed references, Corrosion Resistance of Aluminum and Magnesium Alloys provides an essential, up-to-date resource for graduate-level study, as well as a working reference for professionals using aluminum, magnesium, and their alloys.

Download or read book Magnesium and Its Alloys as Implant Materials written by Mirco Peron and published by CRC Press. This book was released on 2020-03-18 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite their tremendous potential, Mg and its alloys are not yet used in biomedical applications. This book aims to provide scientific insights into the challenges of the materials, and give an overview of the research regarding their mechanical properties, corrosion behaviour and biological performances. The authors intend to put the reader into the position to accurate discern the proper Mg-based material for his/her applications and to choose the proper improvement strategy to his/her cause. To this aim, the manuscript is structured as follow: in Section 2, the main challenges hampering the use of magnesium in biomedical applications and the common improvement strategies are listed. In Section 3, the most investigated Mg alloys are reported in separate sub-sections, detailing their mechanical properties, corrosion behaviour and biotoxicity. High-pure and ultra-high-pure Mg, Al-based Mg alloys, Zn-based Mg alloys, Ca-based alloys and RE-based Mg alloys have been considered. In Section 4, the alloys’ performances with respect to the challenges is summarized providing the reader with useful information and suggestions on the potentially most suited choice. Finally, in Section 5, an outlook portraying the authors’ opinion of the future development of the field will be provided. This book will allow biomedical engineers, surface scientists, material scientists, implant manufacturers and companies working on implant approval an overview of the state-of-the-art technologies adopted so far to overcome the drawbacks of Mg for biomedical applications. Particular emphasis is put on explaining the link between mechanical, corrosion and biocompatible properties of Mg and its alloys as well as their pros and cons. In doing so, the authors intend to put the reader into the position to accurate discern the proper Mg-based material for his/her applications and to choose the proper improvement strategy to his/her cause.

Download or read book Magnesium Alloys written by Frank Czerwinski and published by BoD – Books on Demand. This book was released on 2014-11-05 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium alloys with their unique physical and chemical properties are important candidates for many modern engineering applications. Their density, being the lowest of all structural metals, makes them the primary choice in global attempts aimed at reducing the weight of transportation vehicles. However, magnesium also creates challenges at certain stages of raw alloy melting, fabrication of net-shape components and their service. The first one is caused by very high affinity of magnesium to oxygen, which requires protective atmospheres increasing manufacturing cost and heavily contributing to greenhouse gas emissions. The second challenge relates to very high corrosivity of liquid magnesium towards materials it contacts. This imposes restrictions on the selection of materials used to contain, transfer or process molten magnesium during manufacturing operations. A mixture of unique benefits and serious challenges of magnesium alloys in solid and liquid states described here makes the book very useful for a broad audience of scientists and engineers from academia and industry.

Download or read book Advances in Wrought Magnesium Alloys written by Colleen Bettles and published by Elsevier. This book was released on 2012-04-25 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book summarises the wealth of recent research on our understanding of process-property relationships in wrought magnesium alloys and the way this understanding can be used to develop a new generation of alloys for high-performance applications. After an introductory overview of current developments in wrought magnesium alloys, part one reviews fundamental aspects of deformation behaviour. These chapters are the building blocks for the optimisation of processing steps covered in part two, which discusses casting, extrusion, rolling and forging technologies. The concluding chapters cover applications of wrought magnesium alloys in automotive and biomedical engineering. With its distinguished editors, and drawing on the work of leading experts in the field, Advances in wrought magnesium alloys is a standard reference for those researching, manufacturing and using these alloys. Summarises recent research on our understanding of process-property relationships in wrought magnesium alloys Discusses the way this understanding can be used to develop a new generation of alloys for high-performance applications Reviews casting, extrusion, rolling and forging technologies, fundamental aspects of deformation behaviour, and applications of wrought magnesium alloys in automotive and biomedical engineering

Download or read book Engineering Properties of Magnesium Alloys written by Charles Moosbrugger and published by ASM International. This book was released on 2017-11-01 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium and magnesium alloys provide unique properties for engineering applications. Magnesium alloys are popular as a structural material because of their combination of light weight and strength. They are desirable for portable tools, appliances, electronic devices, airplanes, space vehicles, and land transportation. This book is written for engineers, scientists, teachers, and students engaged in the design process of material selection and material elimination. While focused on mechanical properties for structural design, the physical properties that are germane to corrosion behavior and electrical applications are represented. Two-thirds of the book is devoted to datasheets for individual alloys which provide a handy quick reference to specific properties and performance. The remainder of the book addresses topics common to all magnesium alloys such as the alloy designation system and product forms. Casting alloys and wrought alloys are compared. The alloy performance at elevated temperature is presented, as are fatigue properties. Finally, a summary of the corrosion behavior of selected alloys is discussed along with how these corrosion mechanisms can be applied for beneficial results.

Download or read book Magnesium Alloys written by Tomasz Tański and published by BoD – Books on Demand. This book was released on 2018-12-19 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical magnesium alloys are a combination of aluminium, magnesium, manganese and zinc. Magnesium combined with lithium forms ultralight alloys that have many uses. Since it is a reasonable material, it offers great possibilities and is constantly tested at various angles of applications and properties. Magnesium, previously used for military purposes, seems to fit perfectly to the requirements of the currently prevailing technology. Low density with appropriate mechanical properties (strength, high operating temperature), good foundry properties (high castability and low shrinkage), vibration damping ability and cost-effectiveness of recycling seem to be an ideal response to market needs. All things considered, magnesium alloys are the perfect material used in various industries starting from the automotive industry, through sport, electronics up to the space industry and defence. This book is written by experts in various areas of magnesium science and technology. It gives a general idea of modern advancements in theory and practical purposes of magnesium alloys. The book reports fundamental aspects of corrosion types and details about magnesium alloys designed to work in elevated temperatures and superplastic behaviour. Fundamentals, broad experience, theory as well as complex technological aspects make this work helpful for engineers and scientists from all over the world.

Download or read book New Features on Magnesium Alloys written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2012-07-11 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium alloys have been attractive to designers due to their low density (two thirds that of aluminium), the sixth most abundant on earth, is ductile and the most machinable of all the metals. This has been a major factor in the widespread use of magnesium alloy castings and wrought products, powder metallurgy components, sacrificial anodes for the protection of other metals, tools. The present book, "New Features on Magnesium Alloys", gives us an overview in some special areas of magnesium alloys concerning technological applications and eco-friendly requirements. Each chapter brings us a new facet relating to the magnesium alloy application: magnesium alloys quasicrystals used to magnesium alloys reinforcement; rare earth metals as alloying components in magnesium implants for orthopaedic applications; magnesium alloys surface treatment by applying physical vapor deposition processes; casting magnesium alloys subjected to laser treatment; ductility enhancement on special magnesium alloys; welding and joining processing of magnesium alloys; transport application of magnesium and its alloys.

Download or read book Magnesium Alloys as Degradable Biomaterials written by Yufeng Zheng and published by CRC Press. This book was released on 2015-10-09 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium Alloys as Degradable Biomaterials provides a comprehensive review of the biomedical applications of biodegradable magnesium and its alloys. Magnesium has seen increasing use in orthopedic and cardiovascular applications over the last decade, particularly for coronary stents and bone implants.The book discusses the basic concepts of biodeg

Download or read book Magnesium 2021 written by Alan Luo and published by Springer Nature. This book was released on 2021-05-28 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection from the 12th International Conference on Magnesium Alloys and Their Applications (Mg 2021)—the longest running conference dedicated to the development of magnesium alloys—covers the breadth of magnesium research and development, from primary production to applications to end-of-life management. Authors from academia, government, and industry discuss new developments in magnesium alloys and share valuable insights. Topics in this volume include but are not limited to the following: Primary production Alloy development Solidification and casting processes Forming and thermo-mechanical processing Other manufacturing process development (including joining and additive manufacturing) Corrosion and protection Modeling and simulation Structural, functional, biomedical, and energy applications Advanced characterization and fundamental theories Recycling and environmental issues

Download or read book Magnesium Technology written by Horst E. Friedrich and published by Springer Science & Business Media. This book was released on 2006 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the authors present the current state of both research and technological application of magnesium. In particular, casting and wrought alloys are presented in Chapter 5, followed by a large chapter dedicated to fabrication methods. Corrosion and Protection are treated in Chapter 7. Chapter 8 discusses Engineering Requirements, Strategies and Examples for automobiles in Europe, USA, Asia and Pacific and also for Aerospace and Consumer Articles. Chapter 10 is dedicated to recycling. The experience of authors from seven countries has been combined to produce this book. The book addresses materials researchers as well as design engineers. TOC:Introduction.- History.- Production Technologies.- Physical Metallurgy.- Melting, Alloying and Refining.- Alloys of Practical Importance.- Fabrication Methods.- Corrosion and Surface Protection.- Engineering Requirements, Strategies and Examples.- Recycling.- Data Sheet.