Download or read book Machining of Complex Sculptured Surfaces written by Joao Paulo Davim and published by Springer Science & Business Media. This book was released on 2012-01-05 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The machining of complex sculptured surfaces is a global technological topic, in modern manufacturing with relevance in both industrialized and emerging in countries, particularly within the moulds and dies sector whose applications include highly technological industries such as the automotive and aircraft industry. Machining of Complex Sculptured Surfaces considers new approaches to the manufacture of moulds and dies within these industries. The traditional technology employed in the manufacture of moulds and dies combined conventional milling and electro-discharge machining (EDM) but this has been replaced with high-speed milling (HSM) which has been applied in roughing, semi-finishing and finishing of moulds and dies with great success. Machining of Complex Sculptured Surfaces provides recent information on machining of complex sculptured surfaces including modern CAM systems and process planning for three and five axis machining as well as explanations of the advantages of HSM over traditional methods ranging from work piece precision and roughness to manual polishing following machining operations. Whilst primarily intended for engineering students and post graduates (particularly in the fields of mechanical, manufacturing or materials), Machining of Complex Sculptured Surfaces provides clear instructions on modern manufacturing; serving as a practical resource for all academics, researchers, engineers and industry professionals with interest in the machining of complex sculptured surfaces.
Download or read book Machining of Complex Sculptured Surfaces written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The machining of complex sculptured surfaces is a global technological topic, in modern manufacturing with relevance in both industrialized and emerging in countries, particularly within the moulds and dies sector whose applications include highly technological industries such as the automotive and aircraft industry. Machining of Complex Sculptured Surfaces considers new approaches to the manufacture of moulds and dies within these industries. The traditional technology employed in the manufacture of moulds and dies combined conventional milling and electro-discharge machining (EDM) but this has been replaced with high-speed milling (HSM) which has been applied in roughing, semi-finishing and finishing of moulds and dies with great success. Machining of Complex Sculptured Surfaces provides recent information on machining of complex sculptured surfaces including modern CAM systems and process planning for three and five axis machining as well as explanations of the advantages of HSM over traditional methods ranging from work piece precision and roughness to manual polishing following machining operations. Whilst primarily intended for engineering students and post graduates (particularly in the fields of mechanical, manufacturing or materials), Machining of Complex Sculptured Surfaces provides clear instructions on modern manufacturing; serving as a practical resource for all academics, researchers, engineers and industry professionals with interest in the machining of complex sculptured surfaces.
Download or read book Machining written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2008-07-11 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining is one of the most important manufacturing processes. Parts manufactured by other processes often require further operations before the product is ready for application. “Machining: Fundamentals and Recent Advances” is divided into two parts. Part I explains the fundamentals of machining, with special emphasis on three important aspects: mechanics of machining, tools, and work-piece integrity. Part II is dedicated to recent advances in machining, including: machining of hard materials, machining of metal matrix composites, drilling polymeric matrix composites, ecological machining (minimal quantity of lubrication), high-speed machining (sculptured surfaces), grinding technology and new grinding wheels, micro- and nano-machining, non-traditional machining processes, and intelligent machining (computational methods and optimization). Advanced students, researchers and professionals interested or involved in modern manufacturing engineering will find the book a useful reference.
Download or read book Sculptured Surface Machining written by Byoung K. Choi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential book documents the latest research progress and key issues affecting SSM software development. With a particular focus on the CAD/CAM environment, it provides a rich source of reference and covers a wide range of topics.
Download or read book Hybrid Manufacturing Processes written by Wit Grzesik and published by Springer Nature. This book was released on 2021-07-03 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores, in a systematic way, both conventional and unconventional material shaping processes with various modes of hybridization in relation to theory, modelling and industrial potential. The demand for high productivity and high accuracy in manufacturing is continuously increasing, based on improvement and optimization strategies. Hybridization of manufacturing processes will play a crucial role and will be of a key importance in achieving environmental and economical sustainability. Structured in three parts, Hybrid Manufacturing Processes summarizes the state-of-the art hybrid manufacturing processes based on available literature sources and production reports. The book begins by providing information on the physical fundamentals of the removal and non-removal processes in macro-, micro and nanoscales. It then follows with an overview of the possible ways of hybridization and the effects on the enhancement of process performance, before concluding with a summary of production outputs related to surface integrity, specifically with respect to difficult-to-machine materials. Considering the applications of different sources of hybridization including mechanical, thermal and chemical interactions or their combinations, this book will be of interest to a range of researchers and practicing engineers within the field of manufacturing.
Download or read book Geometric and Algorithmic Aspects of Computer Aided Design and Manufacturing written by Ravi Janardan and published by American Mathematical Soc.. This book was released on 2005 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Design and Manufacturing (CAD/CAM) is concerned with all aspects of the process of designing, prototyping, manufacturing, inspecting, and maintaining complex geometric objects under computer control. As such, there is a natural synergy between this field and Computational Geometry (CG), which involves the design, analysis, implementation, and testing of efficient algorithms and data representation techniques for geometric entities such as points, polygons, polyhedra, curves, and surfaces. The DIMACS Center (Piscataway, NJ) sponsored a workshop to further promote the interaction between these two fields. Attendees from academia, research laboratories, and industry took part in the invited talks, contributed presentations, and informal discussions. This volume is an outgrowth of that meeting.
Download or read book Introduction to Mechanical Engineering written by J. Paulo Davim and published by Springer. This book was released on 2018-04-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook fosters information exchange and discussion on all aspects of introductory matters of modern mechanical engineering from a number of perspectives including: mechanical engineering as a profession, materials and manufacturing processes, machining and machine tools, tribology and surface engineering, solid mechanics, applied and computational mechanics, mechanical design, mechatronics and robotics, fluid mechanics and heat transfer, renewable energies, biomechanics, nanoengineering and nanomechanics. At the end of each chapter, a list of 10 questions (and answers) is provided.
Download or read book Machining Impossible Shapes written by Gustav J. Olling and published by Springer. This book was released on 2013-03-20 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: On November 9-11, 1998,85 participants, representing 17 countries, gathered in Aubum Hills, Michigan, at the Chrysler Tech Center, to attend a workshop "SSM'98" (or Sculptured Surface Machining '98) organized by IFIP Working Group 5.3. This was the first major workshop on sculptured surface machining since the CAM-I sponsored conference "Machining Impossible Surfaces" held in 1981. The purpose of the SSM'98 workshop, entitled "Machining Impossible Shapes", was to promote a cross-fertilization of ideas among three communities: industrial users, CAM software developers and academic researchers. There were 17 participants who were "industrial users", 15 represented CAM software developers, 4 were from the machine tool industry, with the remainder being academic researchers. The format of the meeting included 40 presentations in 9 sessions, 4 keynote speeches and a sufficient amount of time for informal discussion amongst the participants. One of the most valuable aspects of the workshop was the opportunity for participants to meet informally and to discuss their mutual interests. This led to two "participant organized" sessions on five axis machining and on machine tool controllers.
Download or read book Intelligent Robotics and Applications written by Honghai Liu and published by Springer. This book was released on 2010-11-10 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: The market demand for skills, knowledge and adaptability have positioned robotics to be an important field in both engineering and science. One of the most highly visible applications of robotics has been the robotic automation of many industrial tasks in factories. In the future, a new era will come in which we will see a greater success for robotics in non-industrial environments. In order to anticipate a wider deployment of intelligent and autonomous robots for tasks such as manufacturing, healthcare, ent- tainment, search and rescue, surveillance, exploration, and security missions, it is essential to push the frontier of robotics into a new dimension, one in which motion and intelligence play equally important roles. The 2010 International Conference on Intelligent Robotics and Applications (ICIRA 2010) was held in Shanghai, China, November 10–12, 2010. The theme of the c- ference was “Robotics Harmonizing Life,” a theme that reflects the ever-growing interest in research, development and applications in the dynamic and exciting areas of intelligent robotics. These volumes of Springer’s Lecture Notes in Artificial Intel- gence and Lecture Notes in Computer Science contain 140 high-quality papers, which were selected at least for the papers in general sessions, with a 62% acceptance rate Traditionally, ICIRA 2010 holds a series of plenary talks, and we were fortunate to have two such keynote speakers who shared their expertise with us in diverse topic areas spanning the rang of intelligent robotics and application activities.
Download or read book Digital Manufacturing and Assembly Systems in Industry 4 0 written by Kaushik Kumar and published by CRC Press. This book was released on 2019-07-03 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, like other industries, is rising to the challenges imposed by aggressive consumer demands and the need for cost-effective processing that delivers quality in the fastest possible time. Fierce competition means that keeping abreast of new developments and applications in technology is essential if companies are to meet demands profitably and keep ahead of competitors. This book investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products using the I40 (industry 4.0)-enabling technologies. This book will also provide case studies covering modeling, simulation, and optimization. eBook includes color figures. Discusses how the advancement of data communication and storage through the Internet of Things (IoT) opens the possibilities of connecting sensors, robots, and devices Sheds light on how the human role in industry is decreasing due to the development of connected manufacturing floors, allowing them to take more control over the manufacturing processes, decisions, and even maintenance Covers the benefits from exploiting digital manufacturing, manufacturing enterprises, and what they expect to achieve Explains the important roles that modeling, simulation, and optimization play Investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products exploiting the I40 (industry 4.0)-enabling technologies
Download or read book Innovating the Future Through Manufacturing written by Vivekanandu Shanmuganathan and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt: Attempts to provide a holistic view of the changing scenario and current research trends in manufacturing. This volume can provide the necessary information to all researchers, professionals and beginners alike in introducing innovating manufacturing practices and furthering research on newer and improved manufacturing technologies.
Download or read book Flexible Automation and Intelligent Manufacturing Establishing Bridges for More Sustainable Manufacturing Systems written by Francisco J. G. Silva and published by Springer Nature. This book was released on 2023-08-23 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and developments in manufacturing, giving a special emphasis to solutions fostering automation and sustainability. Topics cover manufacturing process optimization, remanufacturing, machines and mechanical design, CAD/CAM/CAE, materials characterization and processing, measurement and predictive maintenance techniques. Further topics include artificial intelligence and IoT in manufacturing, robotics, and cutting-edge issues in Industry 4.0/5.0. Based on proceedings of the 32nd edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023, held on June 18 – 22, 2023, in Porto, Portugal, this first volume of a 2-volume set provides academics and professionals with extensive, technical information on trends and technologies in manufacturing, yet it also discusses challenges and practice-oriented experience in all the above-mentioned areas.
Download or read book CAD CAM of Sculptured Surfaces on Multi Axis NC Machine written by Stephen Radzevich and published by Springer Nature. This book was released on 2022-05-31 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many products are designed with aesthetic sculptured surfaces to enhance their appearance, an important factor in customer satisfaction, especially for automotive and consumer electronics products. In other cases, products have sculptured surfaces to meet functional requirements. Functional surfaces interact with the environment or with other surfaces. Because of this, functional surfaces can also be called dynamic surfaces. Functional surfaces do not possess the property to slide over itself, which causes significant complexity in machining of sculptured surfaces. The application of multiaxis numerically controlled (NC) machines is the only way for an efficient machining of sculptured surfaces. Reduction of machining time is a critical issue when machining sculptured surfaces on multiaxis NC machines. To reduce the machining cost of a sculptured surface, the machining time must be as short as possible. Table of Contents: Introduction / Analytical Representation of Scupltured Surfaces / Kinematics of Sculptured-Surface Machining / Analytical Description of the Geometry of Contact of the Sculptured Surface and of the Generating Surface of the Form-Cutting Tool / Form-Cutting Tools of Optimal Design / Conditions of Proper Sculptured-Surface Generation / Predicted Accuracy of the Machined Sculptured Surface / Optimal Sculptured-Surface Machining
Download or read book Kinematic Geometry of Surface Machining written by Stephen P. Radzevich and published by CRC Press. This book was released on 2007-12-14 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principle of Occam's razor loosely translates tothe simplest solution is often the best. The author of Kinematic Geometry of Surface Machining utilizes this reductionist philosophy to provide a solution to the highly inefficient process of machining sculptured parts on multi-axis NC machines. He has developed a method to quickly calcu
Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2019-08-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena organizations must continually strive to create new and better products faster, more efficiently, and more cost effectively than competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standard, in all major industries. The seven volumes in Computer-Aided Design, Engineering, and Manufacturing: Systems Techniques, and Manufacturing provide a comprehensive treatment of the techniques and applications of CAD, CAE, and CAM.
Download or read book Proceedings Of 17th All India Manufacturing Technology written by and published by Allied Publishers. This book was released on with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Generation of Surfaces written by Stephen P. Radzevich and published by CRC Press. This book was released on 2014-02-03 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: A commonly used practice in industry is the machining of sculptured part surfaces on a multiaxis numerical control (NC) machine. While this practice is vital, it is also a costly aspect of the surface generation process. After investing more than 40 years of research into the theory of part surface generation, the author of Generation of Surfaces: Kinematic Geometry of Surface Machining considers an approach that provides optimal machining while factoring in the lowest possible cost. This book presents the modern theory of part surface generation with a focus on kinematic geometry of part surface machining on a multiaxis (NC) machine, and introduces key methods for applying the DG/K-based approach to part surface generation. The DG/K approach is based on the results of research found in two main areas: differential geometry (DG) of surfaces, and kinematics (K) of rigid body in three-dimensional Euclidian space E3. It is an extremely powerful tool for solving a plurality of problems in mechanical/manufacturing engineering. The text is presented in three parts: the basics, the fundamentals, and applications of part surface generation. The first part of the book provides an analytical description of part surfaces, details the principal elements of the theory of multiparametric motion of a rigid body in E3 space, and defines applied coordinate systems. The second half introduces the theory of part surface generation, and includes an analytical description of contact geometry, while the final portion illustrates the potential development of highly effective part surface generation methods. The author illustrates the most complex features of the book with examples, explains all of the results of analysis mathematically, and uses just one set of input parameters—the design parameters of the part surface to be machined. The book considers practical applications for part surface machining and cutting tool design. Developed for use with computer-aided design (CAD) and computer-aided machining (CAM), this text is useful for anyone starting work on new software packages for sculptured part surface machining on a multiaxis NC machine.
