Download or read book Machinery Dynamics written by Ce Zhang and published by Academic Press. This book was released on 2021-11-24 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machinery Dynamics includes recent advancements in this quickly evolving area, while also analyzing real applications, analyzing integrated systems, and including further discussions on each mechanical component. The book treats mechanisms separately, with different methods depending on the level of accuracy required. The contents of this book is made to suit the needs of MsC and PhD students, researchers and engineers in the areas of design of high speed machinery, condition monitoring of machine operation, and vibration. Addresses theoretical backgrounds on topics, including vibration and elastodynamics Introduces rigid and elastic dynamics of various mechanisms, including linkages, cams, gears and planetary gear trains Features relevant application examples

Download or read book Dynamics of Machinery written by Hans Dresig and published by Springer Science & Business Media. This book was released on 2010-07-27 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic loads and undesired oscillations increase with higher speed of machines. At the same time, industrial safety standards require better vibration reduction. This book covers model generation, parameter identification, balancing of mechanisms, torsional and bending vibrations, vibration isolation, and the dynamic behavior of drives and machine frames as complex systems. Typical dynamic effects, such as the gyroscopic effect, damping and absorption, shocks, resonances of higher order, nonlinear and self-excited vibrations are explained using practical examples. These include manipulators, flywheels, gears, mechanisms, motors, rotors, hammers, block foundations, presses, high speed spindles, cranes, and belts. Various design features, which influence the dynamic behavior, are described. The book includes 60 exercises with detailed solutions. The substantial benefit of this "Dynamics of Machinery" lies in the combination of theory and practical applications and the numerous descriptive examples based on real-world data. The book addresses graduate students as well as engineers.

Download or read book Dynamics and Control of Machines written by V.K. Astashev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic models and concepts of machine dynamics and motion control are presented in the order of the principal steps of machine design. The machine is treated as a coupled dynamical system, including drive, mechanisms and controller, to reveal its behavior at different regimes through the interaction of its units under dynamic and processing loads. The main dynamic effects in machines are explained. The influence of component compliances on accuracy, stability and efficiency of the machines is analyzed. Methods for decreasing internal and external vibration activity of machines are described. The dynamic features of digital control are considered. Special attention is given to machines with intense dynamic behavior: resonant and hand-held percussion ones. Targeted to engineers as well as to lecturers and advanced students.

Download or read book Handbook of Machinery Dynamics written by Lynn Faulkner and published by CRC Press. This book was released on 2000-12-14 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considering a broad range of fundamental factors and conditions influencing the optimal design and operation of machinery, the Handbook of Machinery Dynamics emphasizes the force and motion analysis of machine components in multiple applications. Containing details on basic theories and particular problems, the Handbook of Machinery Dynamics... Reviews machine design for selecting the most appropriate energy transfer mechanisms Elaborates on vibration operations Develops and numerically illustrates rotordynamic expressions relating to spin speed, as well as whirl magnitude, speed, mode, and ratio Examines fluid-structure interactions and ways to prevent structural damage through fluid machinery stall or cavitation Calculates dynamic responses of machine tool and workpiece systems and analyzes the machine tool-cutting process as a nonlinear, dynamic system Offers forecasting methods for natural frequencies and mode shapes of blade-disk assemblies, and axial thrust loads on turbomachine bearings Addresses damage control, maintenance requirements, and troubleshooting techniques for ensuring reliable machinery performance And more

Download or read book Dynamics of Machinery written by A.R. Holowenko and published by . This book was released on 1980 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book History of Rotating Machinery Dynamics written by J.S. Rao and published by Springer Science & Business Media. This book was released on 2011-03-07 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts with the invention of the wheel nearly 5000 years ago, and via Archimedes, Aristotle and Hero describes the first practical applications such as water wheels and grinding wheels, pushing on to more rigorous scientific research by inquiring minds such as Leonardo da Vinci and Copernicus in later ages. Newton and Leibniz followed, and beam structures received maximum attention three centuries ago. As focus shifts and related disciplines such as mathematics and physics also develop, slowly turbomachines and rotor and blade dynamics as we know the subject now take shape. While the book traces the events leading to Laval and Parsons Turbines, the emphasis is on rotor and blade dynamics aspects that pushed these turbines to their limits in the last century. The tabular and graphical methods developed in the pre-computer era have taken different form in the last fifty years through finite element methods. The methods evolved in the last century are discussed in detail to help modern day designers and researchers. This book will be useful to young researchers and engineers in industry and educational institutions engaged in rotor and blade dynamics work in understanding the past and the present developments and what is expected in future. Faculty and industry engineers can benefit from this broad perspective history in formulating their developmental plans.

Download or read book Dynamics of Machinery written by Anup Goel and published by Technical Publications. This book was released on 2021-01-01 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics of machinery is concerned with the motion of the parts of the machines and the forces acting on these parts. Dynamic loads and undesired oscillations increase with higher speed of machines. At the same time, industrial safety standards require better vibration isolation. This book covers balancing of mechanisms, torsion vibrations, vibration isolation and the dynamic behaviour of drives and machine frames as complex systems. Typical dynamic effects such as the gyroscopic effect, damping and absorption, shocks are explained using practical examples. The substantial benefit of this dynamics of machinery lies in the combination of theory and practical applications and the numerous descriptive examples based on practical data. Our hope is that this book, through its careful explanations of concepts, practical examples and figures bridges the gap between knowledge and proper application of that knowledge.

Download or read book Kinematics Dynamics and Design of Machinery written by Kenneth J. Waldron and published by John Wiley & Sons. This book was released on 2016-09-20 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kinematics, Dynamics, and Design of Machinery, Third Edition, presents a fresh approach to kinematic design and analysis and is an ideal textbook for senior undergraduates and graduates in mechanical, automotive and production engineering Presents the traditional approach to the design and analysis of kinematic problems and shows how GCP can be used to solve the same problems more simply Provides a new and simpler approach to cam design Includes an increased number of exercise problems Accompanied by a website hosting a solutions manual, teaching slides and MATLAB® programs

Download or read book Dynamics of Machines and Mechanisms Industrial Research written by K.R. Balasubramanian and published by Trans Tech Publications Ltd. This book was released on 2014-07-15 with total page 2786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2014 International Mechanical Engineering Congress (IMEC 2014), June 13-15, 2014, Tamil Nadu, India

Download or read book Introduction to Kinematics and Dynamics of Machinery written by Cho W. S. To and published by Morgan & Claypool Publishers. This book was released on 2017-12-06 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Kinematics and Dynamics of Machinery is presented in lecture notes format and is suitable for a single-semester three credit hour course taken by juniors in an undergraduate degree program majoring in mechanical engineering. It is based on the lecture notes for a required course with a similar title given to junior (and occasionally senior) undergraduate students by the author in the Department of Mechanical Engineering at the University of Calgary from 1981 and since 1996 at the University of Nebraska, Lincoln. The emphasis is on fundamental concepts, theory, analysis, and design of mechanisms with applications. While it is aimed at junior undergraduates majoring in mechanical engineering, it is suitable for junior undergraduates in biological system engineering, aerospace engineering, construction management, and architectural engineering.

Download or read book Reciprocating Machinery Dynamics written by Abdulla S. Rangwala and published by New Age International. This book was released on 2006 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Primarily Written To Meet The Needs Of Practicing Engineers In A Large Variety Of Industries Where Reciprocating Machines Are Used, Although All Of The Material Is Suitable For College Undergraduate Level Design Engineering Courses. It Is Expected That The Reader Is Familiar With Basic To Medium Level Calculus Offered At The College Undergraduate Level.The First Chapter Of The Book Deals With Classical Vibration Theory, Starting With A Single Degree Of Freedom System, To Develop Concepts Of Damping, Response And Unbalance. The Second Chapter Deals With Types And Classification Of Reciprocating Machines, While The Third Chapter Discusses Detail-Design Aspects Of Machine Components. The Fourth Chapter Introduces The Dynamics Of Slider And Cranks Mechanism, And Provides Explanation Of The Purpose And Motion Of Various Components.The Fifth Chapter Looks Into Dynamic Forces Created In The System, And Methods To Balance Gas Pressure And Inertia Loads. The Sixth Chapter Explains The Torsional Vibration Theory And Looks At The Different Variables Associated With It. Chapter Seven Analyzes Flexural Vibrations And Lateral Critical Speed Concepts, Together With Journal Bearings And Their Impact On A Rotating System. Advanced Analytical Techniques To Determine Dynamic Characteristics Of All Major Components Of Reciprocating Machinery Are Presented In Chapter Eight. Methods To Mitigate Torsional Vibrations In A Crankshaft Using Absorbers Are Analyzed In Close Detail. Various Mechanisms Of Flexural Excitation Sources And Their Response On A Rotor-Bearing System Are Explored. Stability Of A Rotor And Different Destabilizing Mechanisms Are Also Included In This Chapter.Techniques In Vibration Measurement And Balancing Of Reciprocating And Rotating Systems Are Presented In Chapter Nine. Chapter Ten Looks At Computational Fluid Dynamics Aspects Of Flow Through Intake And Exhaust Manifolds, As Well As Fluid Flow Induced Component Vibrations. Chapter Eleven Extends This Discussion To Pressure Pulsations In Piping Attached To Reciprocating Pumps And Compressors. Chapter Twelve Considers The Interaction Between The Structural Dynamics Of Components And Noise, Together With Methods To Improve Sound Quality. Optimized Design Of Components Of Reciprocating Machinery For Specified Parameters And Set Target Values Is Investigated At Length In Chapter Thirteen. Practicing Engineers Interested In Applying The Theoretical Model To Their Own Operating System Will Find Case Histories Shown In Chapter FourteenUseful.

Download or read book Fundamentals of Kinematics and Dynamics of Machines and Mechanisms written by Oleg Vinogradov and published by CRC Press. This book was released on 2000-07-25 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of the kinematics and dynamics of machines lies at the very core of a mechanical engineering background. Although tremendous advances have been made in the computational and design tools now available, little has changed in the way the subject is presented, both in the classroom and in professional references. Fundamentals of Kinematics and Dynamics of Machines and Mechanisms brings the subject alive and current. The author's careful integration of Mathematica software gives readers a chance to perform symbolic analysis, to plot the results, and most importantly, to animate the motion. They get to "play" with the mechanism parameters and immediately see their effects. The downloadable resources contain Mathematica-based programs for suggested design projects. As useful as Mathematica is, however, a tool should not interfere with but enhance one's grasp of the concepts and the development of analytical skills. The author ensures this with his emphasis on the understanding and application of basic theoretical principles, unified approach to the analysis of planar mechanisms, and introduction to vibrations and rotordynamics.

Download or read book Kinematics and Dynamics of Planar Machinery written by Burton Paul and published by Prentice Hall. This book was released on 1979 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Dynamics of Turbo Machines written by A. S. Rangwala and published by New Age International. This book was released on 2009 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: STRUCTURAL DYNAMICS OF TURBO-MACHINES presents a detailed and comprehensive treatment of structural vibration evaluation of turbo-machines. Starting with the fundamentals of the theory of vibration as related to various aspects of rotating machines, the dynamic analysis procedures of a broad spectrum of turbo-machines is covered. An in-depth procedure for analyzing the torsional and flexural oscillations of the components and of the rotor-bearing system is presented. The latest trends in design and analysis are presented, chief among them: Blade and coupled disk-blade mod.

Download or read book Advanced Dynamics of Mechanical Systems written by Federico Cheli and published by Springer. This book was released on 2015-05-29 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a general approach for schematization of mechanical systems with rigid and deformable bodies. It proposes a systems approach to reproduce the interaction of the mechanical system with different force fields such as those due to the action of fluids or contact forces between bodies, i.e., with forces dependent on the system states, introducing the concepts of the stability of motion. In the first part of the text mechanical systems with one or more degrees of freedom with large motion and subsequently perturbed in the neighborhood of the steady state position are analyzed. Both discrete and continuous systems (modal approach, finite elements) are analyzed. The second part is devoted to the study of mechanical systems subject to force fields, the rotor dynamics, techniques of experimental identification of the parameters and random excitations. The book will be especially valuable for students of engineering courses in Mechanical Systems, Aerospace, Automation and Energy but will also be useful for professionals. The book is made accessible to the widest possible audience by numerous, solved examples and diagrams that apply the principles to real engineering applications.

Download or read book Mechanical System Dynamics written by Friedrich Pfeiffer and published by Springer Science & Business Media. This book was released on 2008-09-27 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics as a fundamental science in Physics and in Engineering deals with interactions of forces resulting in motion and deformation of material bodies. Similar to other sciences Mechanics serves in the world of Physics and in that of Engineering in a di?erent way, in spite of many and increasing inter- pendencies. Machines and mechanisms are for physicists tools for cognition and research, for engineers they are the objectives of research, according to a famous statement of the Frankfurt physicist and biologist Friedrich Dessauer. Physicists apply machines to support their questions to Nature with the goal of new insights into our physical world. Engineers apply physical knowledge to support the realization process of their ideas and their intuition. Physics is an analytical Science searching for answers to questions concerning the world around us. Engineering is a synthetic Science, where the physical and ma- ematical fundamentals play the role of a kind of reinsurance with respect to a really functioning and e?ciently operating machine. Engineering is also an iterative Science resulting in typical long-time evolutions of their products, but also in terms of the relatively short-time developments of improving an existing product or in developing a new one. Every physical or mathematical Science has to face these properties by developing on their side new methods, new practice-proved algorithms up to new fundamentals adaptable to new technological developments. This is as a matter of fact also true for the ?eld of Mechanics.

Download or read book Machining Dynamics written by Kai Cheng and published by Springer Science & Business Media. This book was released on 2008-10-26 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining dynamics play an essential role in the performance of the machine tools and machining processes which directly affect the removal rate, workpiece surface quality and dimensional and form accuracy. Machining Dynamics: Fundamentals and Applications will be bought by advanced undergraduate and postgraduate students studying manufacturing engineering and machining technology in addition to manufacturing engineers, production supervisors, planning and application engineers, and designers.