Download or read book Lumped and Distributed Passive Networks written by M. Ronald Wohlers and published by Academic Press. This book was released on 2013-10-22 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lumped and Distributed Passive Networks: A Generalized and Advanced Viewpoint considers the mathematical study of a subset of passive linear operators. This five-chapter focuses on the questions of analysis and representation of such operators and illustrates the results of these analyses by obtaining some of the limitations that are imposed on the performance of passive systems. The first two chapters deal with the structure of general linear passive operators. These chapters specifically look into the theory of distributions, called generalized functions. The third and fourth chapters illustrate the application of passive operator theory to rational (lumped) and irrational (distributed) systems. The fifth chapter discusses some applications of optimization theory to the study of networks.
Download or read book Lumped Distributed Passive Networks written by R.M. Wohlers and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Electronics Handbook written by Jerry C. Whitaker and published by CRC Press. This book was released on 1996-12-23 with total page 2626 pages. Available in PDF, EPUB and Kindle. Book excerpt: The superb organization of The Electronics Handbook means that it is not only a comprehensive and fascinating reference, but also a pleasure to use. Some of these organizational features include:
Download or read book Design and Control of RF Power Amplifiers written by Alireza Shirvani and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Control of RF Power Amplifiers investigates various architectures and concepts for the design and control of radio-frequency (RF) power amplifiers. This book covers merits and challenges of integrating RF power amplifiers in various technologies, and introduces a number of RF power amplifier performance metrics. It provides a thorough review of various power amplifier topologies, followed by a description of approaches and architectures for the control and linearization of these amplifiers. A novel parallel amplifier architecture introduced in this book offers a breakthrough solution to enhancing efficiency in systems using power control. Design and Control of RF Power Amplifiers is a valuable resource for designers, researchers and students in the field of RF integrated circuit design. Detailed and thorough coverage of various concepts in RF power amplifier design makes this book an invaluable guide for both beginners and professionals.
Download or read book The Synthesis of Networks Containing Lumped and Distributed Elements Parts i and Ii written by D. C. Youla and published by . This book was released on 1966 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paper is devoted to the synthesis of n-ports composed of the usual passive lumped building blocks and ideal uniform transmission lines possessing identical one-way delays. It is shown that the scattering matrix, W(p, s), of such a structure is two-variable bounded-real. A complete synthesis technique is evolved for purely reactive networks by introducing the concept of a minimal realization. Moreover, it is demonstrated that such lossless networks may be constructed with the absolute minimum number of lumped reactances and lines. Several theorems are also presented delineating the fine structure of nonminimal realizations and two examples serve to illustrate the basic synthesis approach. (Author).
Download or read book Passive Macromodeling written by Stefano Grivet-Talocia and published by John Wiley & Sons. This book was released on 2015-12-07 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers an overview of state of the art passive macromodeling techniques with an emphasis on black-box approaches This book offers coverage of developments in linear macromodeling, with a focus on effective, proven methods. After starting with a definition of the fundamental properties that must characterize models of physical systems, the authors discuss several prominent passive macromodeling algorithms for lumped and distributed systems and compare them under accuracy, efficiency, and robustness standpoints. The book includes chapters with standard background material (such as linear time-invariant circuits and systems, basic discretization of field equations, state-space systems), as well as appendices collecting basic facts from linear algebra, optimization templates, and signals and transforms. The text also covers more technical and advanced topics, intended for the specialist, which may be skipped at first reading. Provides coverage of black-box passive macromodeling, an approach developed by the authors Elaborates on main concepts and results in a mathematically precise way using easy-to-understand language Illustrates macromodeling concepts through dedicated examples Includes a comprehensive set of end-of-chapter problems and exercises Passive Macromodeling: Theory and Applications serves as a reference for senior or graduate level courses in electrical engineering programs, and to engineers in the fields of numerical modeling, simulation, design, and optimization of electrical/electronic systems. Stefano Grivet-Talocia, PhD, is an Associate Professor of Circuit Theory at the Politecnico di Torino in Turin, Italy, and President of IdemWorks. Dr. Grivet-Talocia is author of over 150 technical papers published in international journals and conference proceedings. He invented several algorithms in the area of passive macromodeling, making them available through IdemWorks. Bjørn Gustavsen, PhD, is a Chief Research Scientist in Energy Systems at SINTEF Energy Research in Trondheim, Norway. More than ten years ago, Dr. Gustavsen developed the original version of the vector fitting method with Prof. Semlyen at the University of Toronto. The vector fitting method is one of the most widespread approaches for model extraction. Dr. Gustavsen is also an IEEE fellow.
Download or read book Mathematical Aspects of Electrical Network Analysis written by Herbert S. Wilf and published by American Mathematical Soc.. This book was released on 1971 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transmission Lines and Lumped Circuits written by Giovanni Miano and published by Elsevier. This book was released on 2001-02-23 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of transmission lines is a classical topic of electrical engineering. Recently this topic has received renewed attention and has been a focus of considerable research. This is because the transmisson line theory has found new and important applications in the area of high-speed VLSI interconnects, while it has retained its significance in the area of power transmission. In many applications, transmission lines are connected to nonlinear circuits. For instance, interconnects of high-speed VLSI chips can be modelled as transmission lines loaded with nonlinear elements. These nonlinearities may lead to many new effects such as instability, chaos, generation of higher order harmonics, etc. The mathematical models of transmission lines with nonlinear loads consist of the linear partial differential equations describing the current and voltage dynamics along the lines together with the nonlinear boundary conditions imposed by the nonlinear loads connected to the lines. These nonlinear boundary conditions make the mathematical treatment very difficult. For this reason, the analysis of transmission lines with nonlinear loads has not been addressed adequately in the existing literature. The unique and distinct feature of the proposed book is that it will present systematic, comprehensive, and in-depth analysis of transmission lines with nonlinear loads. A unified approach for the analysis of networks composed of distributed and lumped circuits A simple, concise and completely general way to present the wave propagation on transmission lines, including a thorough study of the line equations in characteristic form Frequency and time domain multiport representations of any linear transmission line A detailed analysis of the influence on the line characterization of the frequency and space dependence of the line parameters A rigorous study of the properties of the analytical and numerical solutions of the network equations The associated discrete circuits and the associated resisitive circuits of transmission lines Periodic solutions, bifurcations and chaos in transmission lines connected to noninear lumped circuits
Download or read book Lumped Elements for RF and Microwave Circuits Second Edition written by Inder J. Bahl and published by Artech House. This book was released on 2022-12-31 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated and including entirely new chapters, this Second Edition provides in-depth coverage of the different types of RF and microwave circuit elements, including inductors, capacitors, resistors, transformers, via holes, airbridges, and crossovers. Featuring extensive formulas for lumped elements, design trade-offs, and an updated and current list of references, the book helps you understand the value and usefulness of lumped elements in the design of RF, microwave and millimeter wave components and circuits. You’ll find a balanced treatment between standalone lumped elements and their circuits using MICs, MMICs and RFICs technologies. You’ll also find detailed information on a broader range RFICs that was not available when the popular first edition was published. The book captures – in one consolidated volume -- the fundamentals, equations, modeling, examples, references and overall procedures to design, test and produce microwave components that are indispensable in industry and academia today. With its superb organization and expanded coverage of the subject, this is a must-have, go-to resource for practicing engineers and researchers in industry, government and university and microwave engineers working in the antenna area. Students will also find it a useful reference with its clear explanations, many examples and practical modeling guidelines.
Download or read book Realizability Theory for Continuous Linear Systems written by Armen H. Zemanian and published by Courier Corporation. This book was released on 1995-01-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise exposition of realizability theory as applied to continous linear systems, specifically to the operators generated by physical systems as mappings of stimuli into responses. Many problems included.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1970 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization of Distributed lumped active Networks written by Mohammad-Ebrahim Mokari-Bolhassan and published by . This book was released on 1970 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many engineering systems which cannot be reasonably modeled by lumped elements, but must be modeled by distributed elements. This is especially true in electrical networks at high frequencies and in integrated circuits. Herein are discussed some computer optimization methods for the design of lumped-distributed networks in which the parameters of the network are adjusted until certain engineering requirements are met. An efficient way to adjust the parameters is to utilize the gradient of the performance index. Two different algorithms are developed to generate the gradient of the performance index with respect to the adjustable parameters. The first method assumes that the network has a cascaded structure, and the gradient is obtained by calculus of variation techniques. The second method which proved to be more efficient is the adjoint network method. The adjoint network method developed previously, using Tellegen's Theorem, for lumped-active networks in branch formulation is extended to distributed-lumped-active networks. For this, the port parameter formulation is used. These methods are applied to several practical examples. The first examples are on the design of UHF broad-band amplifiers with both real and complex loads (a slot antenna). The third example is the low noise matching of a slot antenna to a transistor amplifier. The last example is a design of a low-pass distributed-lumped-active filter. Some of the designs have been built and the measurements show close agreement with the calculated results. A survey of stability criteria which were used in the designs is included. (Author).
Download or read book Air Force Research Resum s written by and published by . This book was released on with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Ultra Wideband Power Transfer Networks written by Binboga Siddik Yarman and published by John Wiley & Sons. This book was released on 2010-06-14 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining analytic theory and modern computer-aided design techniques this volume will enable you to understand and design power transfer networks and amplifiers in next generation radio frequency (RF) and microwave communication systems. A comprehensive theory of circuits constructed with lumped and distributed elements is covered, as are electromagnetic field theory, filter theory, and broadband matching. Along with detailed roadmaps and accessible algorithms, this book provides up-to-date, practical design examples including: filters built with microstrip lines in C and X bands; various antenna matching networks over HF and microwave frequencies; channel equalizers with arbitary gain shapes; matching networks for ultrasonic transducers; ultra wideband microwave amplifiers constructed with lumped and distributed elements. A companion website details all Real Frequency Techniques (including line segment and computational techniques) with design tools developed on MatLab. Essential reading for all RF and circuit design engineers, this is also a great reference text for other electrical engineers and researchers working on the development of communications applications at wideband frequencies. This book is also beneficial to advanced electrical and communications engineering students taking courses in RF and microwave communications technology. www.wiley.com/go/yarman_wideband
Download or read book Electrical Engineering For 1st Year of UPTU UTU written by Navani J.P. & Sapra Sonal and published by S. Chand Publishing. This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic Of Concepts • D.C. Circuit Analaysis • Network Theorem • A. C. Fundamentals • Analysis Of Single Phase A.C. Circuit • Three Phase A.C. Circuit • Measuring Instruments • Introduction To Power System • Magnetic Circuits • Single Phase Trasformer • D.C. Machines • Induction Motors • Three Phase Synchronus Machaines Papers Index
Download or read book The Theory of Linear Systems written by J. E. Rubio and published by Academic Press. This book was released on 2013-10-22 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Theory of Linear Systems presents the state-phase analysis of linear systems. This book deals with the transform theory of linear systems, which had most of its success when applied to time-invariant systems. Organized into nine chapters, this book begins with an overview of the development of some properties of simple differential systems that are mostly of a nonalgebraic nature. This text then presents a brief treatment of vector spaces, matrices, transformations, norms, and inner products. Other chapters deal with the inductive process used to define dynamical systems. This book discusses as well the existence and uniqueness theorem for the solutions of a homogeneous linear differential system. The final chapter deals with the abstract concept of a dynamical system and derives properties of these systems. This book is a valuable resource for advanced graduate students in areas such as economics and bioengineering. Engineers engaged in systems design will also find this book useful.