Download or read book Low temperature Surface Passivation of Crystalline Silicon and Its Application to the Rear Side of Solar Cells written by Stefan Dauwe and published by . This book was released on 2004 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Passivation of Industrial Crystalline Silicon Solar Cells written by Joachim John and published by Institution of Engineering and Technology. This book was released on 2018-11-15 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface passivation of silicon solar cells describes a technology for preventing electrons and holes to recombine prematurely with one another on the wafer surface. It increases the cell's energy conversion efficiencies and thus reduces the cost per kWh generated by a PV system.
Download or read book Physics and Technology of Amorphous Crystalline Heterostructure Silicon Solar Cells written by Wilfried G. J. H. M. van Sark and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s solar cell multi-GW market is dominated by crystalline silicon (c-Si) wafer technology, however new cell concepts are entering the market. One very promising solar cell design to answer these needs is the silicon hetero-junction solar cell, of which the emitter and back surface field are basically produced by a low temperature growth of ultra-thin layers of amorphous silicon. In this design, amorphous silicon (a-Si:H) constitutes both „emitter“ and „base-contact/back surface field“ on both sides of a thin crystalline silicon wafer-base (c-Si) where the electrons and holes are photogenerated; at the same time, a-Si:H passivates the c-Si surface. Recently, cell efficiencies above 23% have been demonstrated for such solar cells. In this book, the editors present an overview of the state-of-the-art in physics and technology of amorphous-crystalline heterostructure silicon solar cells. The heterojunction concept is introduced, processes and resulting properties of the materials used in the cell and their heterointerfaces are discussed and characterization techniques and simulation tools are presented.
Download or read book High Efficiency Crystalline Silicon Solar Cells written by Eun-Chel Cho and published by MDPI. This book was released on 2021-01-06 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is composed of 6 papers. The first paper reports a novel technique for the selective emitter formation by controlling the surface morphology of Si wafers. Selective emitter (SE) technology has attracted renewed attention in the Si solar cell industry to achieve an improved conversion efficiency of passivated-emitter rear-contact (PERC) cells. In the second paper, the temperature dependence of the parameters was compared through the PERC of the industrial-scale solar cells. As a result of their analysis, PERC cells showed different temperature dependence for the fill factor loss as temperatures rose. The third paper reports the effects of carrier selective front contact layer and defect state of hydrogenated amorphous silicon passivation layer/n-type crystalline silicon interface. The results demonstrated the effects of band offset determined by band bending at the interface of the passivation layer and carrier selective front contact layer. In addition, the nc-SiOx: H CSFC layer not only reduces parasitic absorption loss but also has a tunneling effect and field-effect passivation. The fourth paper reports excimer laser annealing of hydrogenated amorphous silicon film for TOPCon solar cell application. This paper analyzes the crystallization of a-Si:H via excimer laser annealing (ELA) and compared this process with conventional thermal annealing. The fifth paper reports the contact mechanism between Ag–Al and Si and the change in contact resistance (Rc) by varying the firing profile. Rc was measured by varying the belt speed and peak temperature of the fast-firing furnace. The sixth paper reports a silicon tandem heterojunction solar cell based on a ZnO/Cu2O subcell and a c-Si bottom subcell using electro-optical numerical modeling. The buffer layer affinity and mobility together with a low conduction band offset for the heterojunction are discussed, as well as spectral properties of the device model.
Download or read book Low Temperature Front Surface Passivation of Interdigitated Back Contact Silicon Heterojunction Solar Cell written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The interdigitated back contact silicon heterojunction (IBC-SHJ) solar cell requires a low temperature front surface passivation/anti-reflection structure. Conventional silicon surface passivation using SiO2 or a-SiNx is performed at temperature higher than 400°C, which is not suitable for the IBC-SHJ cell. In this paper, we propose a PECVD a-Si:H/a-SiNx:H/a-SiC:H stack structure to passivate the front surface of crystalline silicon at low temperature. The optical properties and passivation quality of this structure are characterized and solar cells using this structure are fabricated. With 2 nm a-Si:H layer, the stack structure exhibits stable passivation with effective minority carrier lifetime higher than 2 ms, and compatible with IBC-SHJ solar cell processing. A critical advantage of this structure is that the SiC allows it to be HF resistant, thus it can be deposited as the first step in the process. This protects the a-Si/c-Si interface and maintains a low surface recombination velocity.
Download or read book Aluminum Oxide for the Surface Passivation of High Efficiency Silicon Solar Cells written by Armin Richter and published by . This book was released on 2015-02-23 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book McEvoy s Handbook of Photovoltaics written by Soteris Kalogirou and published by Academic Press. This book was released on 2017-08-24 with total page 1341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Handbook of Photovoltaics, Third Edition, is a 'benchmark' publication for those involved in the design, manufacture and use of these devices. This fully revised handbook includes brand new sections on smart grids, net metering and the modeling of photovoltaic systems, as well as fully revised content on developments in photovoltaic applications, the economics of PV manufacturing and updated chapters on solar cell function, raw materials, photovoltaic standards, calibration and testing, all with new examples and case studies. The editor has assembled internationally-respected contributors from industry and academia around the world to make this a truly global reference. It is essential reading for electrical engineers, designers of systems, installers, architects, policymakers and physicists working with photovoltaics. Presents a cast of international experts from industry and academia to ensure the highest quality information from multiple stakeholder perspectives Covers all things photovoltaics, from the principles of solar cell function and their raw materials, to the installation and design of full photovoltaic systems Includes case studies, practical examples, and reports on the latest advances and worldwide applications
Download or read book Facile Grown Native Oxide Based Passivation of Crystalline Silicon written by A. K. M. Zahidur Rahim Chowdhury and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Cells written by Tom Markvart and published by Elsevier. This book was released on 2004-12-15 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The capture and use of solar energy has been growing for many years, but only in recent times have advances in design and manufacture allowed us to see the incorporation of solar energy as a significant player in the renewable energy arena. Solar cells are at the heart of any photovoltaic system and in this book the various types are described and their characteristics reviewed. Going beyond materials, design and function, ‘Solar Cells’ also covers their testing, monitoring and calibration thus providing a comprehensive account of current activity in this important field of research and industry. ‘Solar Cells’ has been abstracted from the recent ‘Practical Handbook of Photovoltaics’ by the same editors (ISBN 185617 3909. 2003: Elsevier) Internationally-respected contributors from industry and academia Abstracted from ‘The Practical Handbook of Photovoltaics' by the same Editors A comprehensive source-book on all aspects of solar cells
Download or read book New Perspectives on Surface Passivation Understanding the Si Al2O3 Interface written by Lachlan E. Black and published by Springer. This book was released on 2016-04-15 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses the problem of passivation at the surface of crystalline silicon solar cells. More specifically, it reports on a high-throughput, industrially compatible deposition method for Al2O3, enabling its application to commercial solar cells. One of the main focus is on the analysis of the physics of Al2O3 as a passivating dielectric for silicon surfaces. This is accomplished through a comprehensive study, which moves from the particular, the case of aluminium oxide on silicon, to the general, the physics of surface recombination, and is able to connect theory with practice, highlighting relevant commercial applications.
Download or read book Silicon Heterojunction Solar Cells written by W.R. Fahrner and published by Trans Tech Publications Ltd. This book was released on 2006-08-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of today must face up to two contradictory energy problems: on the one hand, there is the sharply growing consumer demand in countries such as China and India. On the other hand, natural resources are dwindling. Moreover, many of those countries which still possess substantial gas and oil supplies are politically unstable. As a result, renewable natural energy sources have received great attention. Among these, solar-cell technology is one of the most promising candidates. However, there still remains the problem of the manufacturing costs of such cells. Many attempts have been made to reduce the production costs of conventional solar cells (manufactured from monocrystalline silicon using diffusion methods) by instead using cheaper grades of silicon, and simpler pn-junction fabrication. That is the hero of this book; the heterojunction solar cell.
Download or read book Si Silicon written by Eberhard F. Krimmel and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first of three Gmelin Handbook volumes in the silicon se ries that will cover silicon nitride, a normaUy solid material with the idealized formula Si N . This volume, 3 4 "Silicon" Supplement Volume B Sc, is devoted to applications of silicon nitride in microelec tronics and solar ceUs. The compendium is the product of a critical selection among more than 17600 publications on silicon nitride issued up to January 1990. Out of a total of 5900 publications dealing with the fabrication and use of microelectronic devices (including 2400 Japanese patent applications), about 4000 papers have been selected for this volume. The current volume is grouped into three parts. Chapters 2 to 8 deal with general, non specific microelectronic applications of silicon nitride, Chapters 9 to 31 cover applications of silicon nitride in specific devices and device components, and Chapter 32 is devoted exclusively to applications in solar ceUs, including information on our general understanding of the role of silicon nitride in photovoltaic devices. Experimental results on the preparation of silicon nitride layers for application in unspeci fied devices are in Chapter 2. Whenever the preparation is in connection with specific devices, the information is presented in the respective chapters. The general preparation of silicon nitride layers is not covered in this volume, but will appear in "Silicon" Supplement Volume B 5a. See also the Introductory Remarks, Chapter 1, p. 1.
Download or read book High Efficiency Solar Cells written by Xiaodong Wang and published by Springer Science & Business Media. This book was released on 2013-11-01 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the effort to increase the contribution of solar cells (photovoltaics) to our energy mix, this book addresses three main areas: making existing technology cheaper, promoting advanced technologies based on new architectural designs, and developing new materials to serve as light absorbers. Leading scientists throughout the world create a fundamental platform for knowledge sharing that combines the physics, materials, and device architectures of high-efficiency solar cells. While providing a comprehensive introduction to the field, the book highlights directions for further research, and is intended to stimulate readers’ interest in the development of novel materials and technologies for solar energy applications.
Download or read book Proceedings of the 7th International Conference on Advances in Energy Research written by Manaswita Bose and published by Springer Nature. This book was released on 2020-10-17 with total page 1639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 7th International Conference on Advances in Energy Research (ICAER 2019), providing a comprehensive coverage encompassing all fields and aspects of energy in terms of generation, storage, and distribution. Themes such as optimization of energy systems, energy efficiency, economics, management, and policy, and the interlinkages between energy and environment are included. The contents of this book will be of use to researchers and policy makers alike.
Download or read book Effective Passivation of the Low Resistivity Silicon Surface by a Rapid Thermal Oxide PECVD Silicon Nitride Stack and Its Application to Passivated Rear and Bifacial Si Solar Cells written by and published by . This book was released on 1998 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: A novel stack passivation scheme, in which plasma silicon nitride (SiN) is stacked on top of a rapid thermal SiO2 (RTO) layer, is developed to attain a surface recombination velocity (S) approaching 10 cm/s at the 1.3 [Omega]-cm p-type (100) silicon surface. Such low S is achieved by the stack even when the RTO and SiN films individually yield considerably poorer surface passivation. Critical to achieving low S by the stack is the use of a short, moderate temperature anneal (in this study 730 C for 30 seconds) after film growth and deposition. This anneal is believed to enhance the release and delivery of atomic hydrogen from the SiN film to the Si-SiO2 interface, thereby reducing the density of interface traps at the surface. Compatibility with this post-deposition anneal makes the stack passivation scheme attractive for cost-effective solar cell production since a similar anneal is required to fire screen-printed contacts. Application of the stack to passivated rear screen-printed solar cells has resulted in V{sub oc}'s of 641 mV and 633 mV on 0.65 [Omega]-cm and 1.3 [Omega]-cm FZ Si substrates, respectively. These V{sub oc} values are roughly 20 mV higher than for cells with untreated, highly recombinative back surfaces. The stack passivation has also been used to form fully screen-printed bifacial solar cells which exhibit rear-illuminated efficiency as high as 11.6% with a single layer AR coating.
Download or read book Advanced Front Side Technology on Crystalline Silicon Solar Cells written by and published by Victor Prajapati. This book was released on with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tenth E C Photovoltaic Solar Energy Conference written by A. Luque and published by Springer. This book was released on 2012-12-06 with total page 1437 pages. Available in PDF, EPUB and Kindle. Book excerpt: I have great pleasure in presenting the Proceedings of the 10th European Photovoltaic Solar Energy Conference held in Lisbon from 8 to 12 April 1991. These Proceedings contain all the scientific papers delivered at the Conference. The following is a short summary of the Conference activities. The Conference was opened by the Minister of Industry and Energy of Portugal, Eng. Luis Mira do Amaral. At the opening ceremony the Becquerel Prize, created by the Commission of the European Communities, was awarded to Professor Werner Bloss of the University of Stuttgart, and presented by Professor Philippe Bourdeau, Director at the Directorate-General for Science, Research and Development. The Becquerellecture delivered by Professor Bloss constituted the scientific opening to the conference. About 760 delegates from 53 countries presented around 350 contributions, 50 of them as plenary lectures; the contributions were selected among the many papers submitted, this time more strictly than ever before. Also a selected group of scientists were invited to deliver 15 review lectures, to provide an adequate context to the contributions to the Conference. A Symposium on Photovoltaics in Developing Countries, which was very well attended, took place as a parallel event. The Symposium provided an opportunity to hear not only experts of the industrialized countries, but also speakers from the countries where photovoltaics provides services of paramount value.
