Download or read book Mechanical Properties of Materials at Low Temperatures written by D. Wigley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: In writing this monograph, the aim has been to consider the mechanical properties of the wide range of materials now available in such a way as to start with the fundamental nature of these properties and to follow the discussion through to the point at which the reader is able to comprehend the significance or otherwise of the large amounts of data now available in design manuals and other compilations. In short, it is hoped that this volume will be used as a companion to these data compilations and as an aid to their interpretation. In attempting to cover such a wide field, a large degree of selection has been necessary, as complete volumes have been written on topics which here have had to be covered in a few pages or less. It is inevitable that not everyone will agree with the choice made, especially if it is his own subject which has been discussed rather briefly, and the author accepts full res ponsibility for the selection made. The book is written at a level which should be easily followed by a university graduate in science or engineer ing, although, if his background has not included a course in materials science, some groundwork may be lacking.

Download or read book Mechanical Properties of Structural Materials at Low Temperatures written by Ralph Michael McClintock and published by . This book was released on 1960 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Properties of Aluminum Alloys written by John Gilbert Kaufman and published by ASM International. This book was released on 1999-01-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of data collected and maintained for many years as the property of a large aluminum company, which decided in 1997 to make it available to other engineers and materials specialists. In tabular form, presents data on the tensile and creep properties of eight species of wrought alloys and five species of cast alloys in the various shapes used in applications. Then looks at the fatigue data for several alloys under a range of conditions and loads. The data represent the typical or average findings, and though some were developed years ago, the collection is the largest and most detailed available. There is no index.

Download or read book Low Temperature Mechanical Properties of Copper and Selected Copper Alloys written by Richard Palmer Reed and published by . This book was released on 1967 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Cryogenic Engineering written by K. D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: By popular request, the National Bureau of Standards was again a host to a conference on cryogenic engineering on August 19-21, 1957. Similar meetings were held here in 1954 and 1956. The acceptance of over forty papers for this conference was certainly a sign of the increasing activity and interest in this engineering field. There seems little doubt that it will continue to grow, justifying the need for annual meetings. To make the Proceedings more interesting an attempt was made to include as much as possible of the general discussion which followed each paper. To obtain individual reprints of anyone particular paper, please contact the authors directly. 1957 CRYOGENIC ENGINEERING CONFERENCE COMMITTEE B. W. Birmingham National Bureau of Standards S. C. Collins Massachusetts Institute of Technology E. F. Hammel Los Alamos Scientific Laboratory R. B. Scott National Bureau of Standards K. D. Timmerhaus University of Colorado W. T. Ziegler Georgia Institute of Technology i ACKNOWLEDGMENTS The 1957 Cryogenic Engineering Conference Committee gratefully acknowledges the continued support and interest of the following organizations who have made the 1957 Cryogenic Engineering Conference and the publication of this Proceedings possible. L' Air Liquide Air Products, Inc. Allison Division, General Motor s American Messer Corporation Aro Equipment Corporation Beech Aircraft Corporation Bell Aircraft Boeing Airplane Company Cambridge Corporation Convair Curtiss-Wright Corporation Garrett Corporation General Electric Company Herrick L. Johnston, Inc. Hofman Laboratories Linde Company A. D. Little, Inc.

Download or read book Stainless Steels and Alloys written by Zoia Duriagina and published by BoD – Books on Demand. This book was released on 2019-02-13 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials science is the magic that allows us to change the chemical composition and microstructure of material to regulate its corrosion-mechanical, technological, and functional properties. Five major classes of stainless steels are widely used: ferritic, austenitic, martensitic, duplex, and precipitation hardening. Austenitic stainless steels are extensively used for service down to as low as the temperature of liquid helium (-269oC). This is largely due to the lack of a clearly defined transition from ductile to brittle fracture in impact toughness testing. Steels with ferritic or martensitic structures show a sudden change from ductile (safe) to brittle (unsafe) fracture over a small temperature difference. Even the best of these steels shows this behavior at temperatures higher than -100oC and in many cases only just below zero. Various types of stainless steel are used across the whole temperature range from ambient to 1100oC. This book will be useful to scientists, engineers, masters, graduate students, and students. I hope readers will enjoy this book and that it will serve to create new materials with unique properties.

Download or read book Light Metal Alloys Applications written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2014-06-11 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight alloys have become of great importance in engineering for construction of transportation equipment. At present, the metals that serve as the base of the principal light alloys are aluminum and magnesium. One of the most important lightweight alloys are the aluminum alloys in use for several applications (structural components wrought aluminum alloys, parts and plates). However, some casting parts that have low cost of production play important role in aircraft parts. Magnesium and its alloys are among the lightest of all metals and the sixth most abundant metal on earth. Magnesium is ductile and the most machinable of all metals. Many of these light weight alloys have appropriately high strength to warrant their use for structural purposes, and as a result of their use, the total weight of transportation equipment has been considerably decreased.

Download or read book Low Temperature Properties of Selected Materials written by Dorothea M. Johnson and published by . This book was released on 1977 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is a bibliography of the work reported in the literature on the effects of low temperature on the properties of structural materials. Some of the newer areas of cryogenic technology such as superconducting machinery involve environments which may subject the components to temperature as low as 4 K. Exposure of structural materials to such low temperatures affects their properties. This bibliography contains 963 references published between 1950-1976, arranged in chronological/alphabetical order. Combined material/property indexes are provided. (Author).

Download or read book Materials at Low Temperatures written by Richard Palmer Reed and published by ASM International(OH). This book was released on 1983 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Properties of Metals and Alloys written by John Laurence Everhart and published by . This book was released on 1943 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Austenitic Steels at Low Temperatures written by T. Horiuchi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for alternate energy sources has led to the develop ment of prototype fusion and MHD reactors. Both possible energy systems in current designs usually require the use of magnetic fields for plasma confinement and concentration. For the creation and maintenance of large 5 to 15 tesla magnetic fields, supercon ducting magnets appear more economical. But the high magnetic fields create large forces, and the complexities of the conceptual reactors create severe space restrictions. The combination of re quirements, plus the desire to keep construction costs at a mini mum, has created a need for stronger structural alloys for service at liquid helium temperature (4 K). The complexity of the required structures requires that these alloys be weldable. Furthermore, since the plasma is influenced by magnetic fields and since magnet ic forces from the use of ferromagnetic materials in many configur ations may be additive, the best structural alloy for most applica tions should be nonmagnetic. These requirements have led to consideration of higher strength austenitic steels. Strength increases at low temperatures are achieved by the addition of nitrogen. The stability of the austenitic structure is retained by adding manganese instead of nickel, which is more expensive. Research to develop these higher strength austenitic steels is in process, primarily in Japan and the United States.

Download or read book Experimental Techniques for Low Temperature Measurements written by Jack Ekin and published by Oxford University Press. This book was released on 2006-10-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher description

Download or read book High Entropy Alloys written by Michael C. Gao and published by Springer. This book was released on 2016-04-27 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive description of high-entropy alloys (HEAs). The authors summarize key properties of HEAs from the perspective of both fundamental understanding and applications, which are supported by in-depth analyses. The book also contains computational modeling in tackling HEAs, which help elucidate the formation mechanisms and properties of HEAs from various length and time scales.

Download or read book Advances in Cryogenic Engineering written by Klaus D. Timmerhaus and published by . This book was released on 1968 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lead free Soldering Process Development and Reliability written by Jasbir Bath and published by John Wiley & Sons. This book was released on 2020-06-12 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the major topics in lead-free soldering Lead-free Soldering Process Development and Reliability provides a comprehensive discussion of all modern topics in lead-free soldering. Perfect for process, quality, failure analysis and reliability engineers in production industries, this reference will help practitioners address issues in research, development and production. Among other topics, the book addresses: · Developments in process engineering (SMT, Wave, Rework, Paste Technology) · Low temperature, high temperature and high reliability alloys · Intermetallic compounds · PCB surface finishes and laminates · Underfills, encapsulants and conformal coatings · Reliability assessments In a regulatory environment that includes the adoption of mandatory lead-free requirements in a variety of countries, the book’s explanations of high-temperature, low-temperature, and high-reliability lead-free alloys in terms of process and reliability implications are invaluable to working engineers. Lead-free Soldering takes a forward-looking approach, with an eye towards developments likely to impact the industry in the coming years. These will include the introduction of lead-free requirements in high-reliability electronics products in the medical, automotive, and defense industries. The book provides practitioners in these and other segments of the industry with guidelines and information to help comply with these requirements.

Download or read book Cryogenic Materials Data Handbook written by United States. National Bureau of Standards. Cryogenic Engineering Laboratory. Boulder, Colo and published by . This book was released on 1961 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Liquid Phase Sintering written by R.M. German and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past few years there has been rapid growth in the activities involving particulate materials because of recognized advantages in manufacturing. This growth is attributed to several factors; i) an increased concern over energy utilization, ii) a desire to better control microstructure in engineermg materials, iii) the need for 1mproved material economy, iv) societal and economic pressures for higher productivity and quality, v) requirements for unique property combinations for high performance applica tions, and vi) a desire for net shape forming. Accordingly, liquid phase sintering has received increased attention as part of the growth in particulate materials processing. As a consequence, the commercial applications for liquid phase sintering are expanding rapidly. This active and expanding interest is not well served by available texts. For this reason I felt it was appropriate to write this book on liquid phase sintering. The technology of liquid phase sintering IS quite old and has been in use in the ceramics industry for many centuries. However, the general perception among materials and manufacturing engineers is that liquid phase sintering is still a novel technique. I believe the diverse technological appli cations outlined in this book will dispel I such impressions. Liquid phase. sintering has great value in fabricating several unique materials to near net shapes and will continue to expand in applications as the fundamental attrib utes are better appreciated. I am personally involved with several uses for liquid phase sintering.