Download or read book Low Power Processors and Systems on Chips written by Christian Piguet and published by CRC Press. This book was released on 2018-10-03 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The power consumption of microprocessors is one of the most important challenges of high-performance chips and portable devices. In chapters drawn from Piguet's recently published Low-Power Electronics Design, this volume addresses the design of low-power microprocessors in deep submicron technologies. It provides a focused reference for specialists involved in systems-on-chips, from low-power microprocessors to DSP cores, reconfigurable processors, memories, ad-hoc networks, and embedded software. Low-Power Processors and Systems on Chips is organized into three broad sections for convenient access. The first section examines the design of digital signal processors for embedded applications and techniques for reducing dynamic and static power at the electrical and system levels. The second part describes several aspects of low-power systems on chips, including hardware and embedded software aspects, efficient data storage, networks-on-chips, and applications such as routing strategies in wireless RF sensing and actuating devices. The final section discusses embedded software issues, including details on compilers, retargetable compilers, and coverification tools. Providing detailed examinations contributed by leading experts, Low-Power Processors and Systems on Chips supplies authoritative information on how to maintain high performance while lowering power consumption in modern processors and SoCs. It is a must-read for anyone designing modern computers or embedded systems.

Download or read book Low Power Methodology Manual written by David Flynn and published by Springer Science & Business Media. This book was released on 2007-07-31 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a practical guide for engineers doing low power System-on-Chip (SoC) designs. It covers various aspects of low power design from architectural issues and design techniques to circuit design of power gating switches. In addition to providing a theoretical basis for these techniques, the book addresses the practical issues of implementing them in today's designs with today's tools.

Download or read book System on Chip for Real Time Applications written by Wael Badawy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: System-on-Chip for Real-Time Applications will be of interest to engineers, both in industry and academia, working in the area of SoC VLSI design and application. It will also be useful to graduate and undergraduate students in electrical and computer engineering and computer science. A selected set of papers from the 2nd International Workshop on Real-Time Applications were used to form the basis of this book. It is organized into the following chapters: -Introduction; -Design Reuse; -Modeling; -Architecture; -Design Techniques; -Memory; -Circuits; -Low Power; -Interconnect and Technology; -MEMS. System-on-Chip for Real-Time Applications contains many signal processing applications and will be of particular interest to those working in that community.

Download or read book Gain Cell Embedded DRAMs for Low Power VLSI Systems on Chip written by Pascal Meinerzhagen and published by Springer. This book was released on 2017-07-06 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book pioneers the field of gain-cell embedded DRAM (GC-eDRAM) design for low-power VLSI systems-on-chip (SoCs). Novel GC-eDRAMs are specifically designed and optimized for a range of low-power VLSI SoCs, ranging from ultra-low power to power-aware high-performance applications. After a detailed review of prior-art GC-eDRAMs, an analytical retention time distribution model is introduced and validated by silicon measurements, which is key for low-power GC-eDRAM design. The book then investigates supply voltage scaling and near-threshold voltage (NTV) operation of a conventional gain cell (GC), before presenting novel GC circuit and assist techniques for NTV operation, including a 3-transistor full transmission-gate write port, reverse body biasing (RBB), and a replica technique for optimum refresh timing. Next, conventional GC bitcells are evaluated under aggressive technology and voltage scaling (down to the subthreshold domain), before novel bitcells for aggressively scaled CMOS nodes and soft-error tolerance as presented, including a 4-transistor GC with partial internal feedback and a 4-transistor GC with built-in redundancy.

Download or read book Advanced Memory Optimization Techniques for Low Power Embedded Processors written by Manish Verma and published by Springer Science & Business Media. This book was released on 2007-06-20 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes novel memory hierarchies and software optimization techniques for the optimal utilization of memory hierarchies. It presents a wide range of optimizations, progressively increasing in the complexity of analysis and of memory hierarchies. The final chapter covers optimization techniques for applications consisting of multiple processes found in most modern embedded devices.

Download or read book Low Power Electronics Design written by Christian Piguet and published by CRC Press. This book was released on 2018-10-03 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: The power consumption of integrated circuits is one of the most problematic considerations affecting the design of high-performance chips and portable devices. The study of power-saving design methodologies now must also include subjects such as systems on chips, embedded software, and the future of microelectronics. Low-Power Electronics Design covers all major aspects of low-power design of ICs in deep submicron technologies and addresses emerging topics related to future design. This volume explores, in individual chapters written by expert authors, the many low-power techniques born during the past decade. It also discusses the many different domains and disciplines that impact power consumption, including processors, complex circuits, software, CAD tools, and energy sources and management. The authors delve into what many specialists predict about the future by presenting techniques that are promising but are not yet reality. They investigate nanotechnologies, optical circuits, ad hoc networks, e-textiles, as well as human powered sources of energy. Low-Power Electronics Design delivers a complete picture of today's methods for reducing power, and also illustrates the advances in chip design that may be commonplace 10 or 15 years from now.

Download or read book System on Chip Design with Arm Cortex M Processors written by Joseph Yiu and published by Arm Education Media. This book was released on 2019-08-29 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Arm(R) Cortex(R)-M processors are already one of the most popular choices for loT and embedded applications. With Arm Flexible Access and DesignStart(TM), accessing Arm Cortex-M processor IP is fast, affordable, and easy. This book introduces all the key topics that system-on-chip (SoC) and FPGA designers need to know when integrating a Cortex-M processor into their design, including bus protocols, bus interconnect, and peripheral designs. Joseph Yiu is a distinguished Arm engineer who began designing SoCs back in 2000 and has been a leader in this field for nearly twenty years. Joseph's book takes an expert look at what SoC designers need to know when incorporating Cortex-M processors into their systems. He discusses the on-chip bus protocol specifications (AMBA, AHB, and APB), used by Arm processors and a wide range of on-chip digital components such as memory interfaces, peripherals, and debug components. Software development and advanced design considerations are also covered. The journey concludes with 'Putting the system together', a designer's eye view of a simple microcontroller-like design based on the Cortex-M3 processor (DesignStart) that uses the components that you will have learned to create.

Download or read book On Chip Power Delivery and Management written by Inna P. Vaisband and published by Springer. This book was released on 2016-04-26 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes methods for distributing power in high speed, high complexity integrated circuits with power levels exceeding many tens of watts and power supplies below a volt. It provides a broad and cohesive treatment of power delivery and management systems and related design problems, including both circuit network models and design techniques for on-chip decoupling capacitors, providing insight and intuition into the behavior and design of on-chip power distribution systems. Organized into subareas to provide a more intuitive flow to the reader, this fourth edition adds more than a hundred pages of new content, including inductance models for interdigitated structures, design strategies for multi-layer power grids, advanced methods for efficient power grid design and analysis, and methodologies for simultaneously placing on-chip multiple power supplies and decoupling capacitors. The emphasis of this additional material is on managing the complexity of on-chip power distribution networks.

Download or read book Low Power CMOS Circuits written by Christian Piguet and published by CRC Press. This book was released on 2018-10-03 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: The power consumption of microprocessors is one of the most important challenges of high-performance chips and portable devices. In chapters drawn from Piguet's recently published Low-Power Electronics Design, Low-Power CMOS Circuits: Technology, Logic Design, and CAD Tools addresses the design of low-power circuitry in deep submicron technologies. It provides a focused reference for specialists involved in designing low-power circuitry, from transistors to logic gates. The book is organized into three broad sections for convenient access. The first examines the history of low-power electronics along with a look at emerging and possible future technologies. It also considers other technologies, such as nanotechnologies and optical chips, that may be useful in designing integrated circuits. The second part explains the techniques used to reduce power consumption at low levels. These include clock gating, leakage reduction, interconnecting and communication on chips, and adiabatic circuits. The final section discusses various CAD tools for designing low-power circuits. This section includes three chapters that demonstrate the tools and low-power design issues at three major companies that produce logic synthesizers. Providing detailed examinations contributed by leading experts, Low-Power CMOS Circuits: Technology, Logic Design, and CAD Tools supplies authoritative information on how to design and model for high performance with low power consumption in modern integrated circuits. It is a must-read for anyone designing modern computers or embedded systems.

Download or read book Power Distribution Networks with On Chip Decoupling Capacitors written by Renatas Jakushokas and published by Springer Science & Business Media. This book was released on 2010-11-23 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes methods for distributing power in high speed, high complexity integrated circuits with power levels exceeding many tens of watts and power supplies below a volt. It provides a broad and cohesive treatment of power distribution systems and related design problems, including both circuit network models and design techniques for on-chip decoupling capacitors, providing insight and intuition into the behavior and design of on-chip power distribution systems. Organized into subareas to provide a more intuitive flow to the reader, this second edition adds more than a hundred pages of new content, including inductance models for interdigitated structures, design strategies for multi-layer power grids, advanced methods for efficient power grid design and analysis, and methodologies for simultaneously placing on-chip multiple power supplies and decoupling capacitors. The emphasis of this additional material is on managing the complexity of on-chip power distribution networks.

Download or read book Low Power CMOS Circuits written by Christian Piguet and published by CRC Press. This book was released on 2018-10-03 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The power consumption of microprocessors is one of the most important challenges of high-performance chips and portable devices. In chapters drawn from Piguet's recently published Low-Power Electronics Design, Low-Power CMOS Circuits: Technology, Logic Design, and CAD Tools addresses the design of low-power circuitry in deep submicron technologies. It provides a focused reference for specialists involved in designing low-power circuitry, from transistors to logic gates. The book is organized into three broad sections for convenient access. The first examines the history of low-power electronics along with a look at emerging and possible future technologies. It also considers other technologies, such as nanotechnologies and optical chips, that may be useful in designing integrated circuits. The second part explains the techniques used to reduce power consumption at low levels. These include clock gating, leakage reduction, interconnecting and communication on chips, and adiabatic circuits. The final section discusses various CAD tools for designing low-power circuits. This section includes three chapters that demonstrate the tools and low-power design issues at three major companies that produce logic synthesizers. Providing detailed examinations contributed by leading experts, Low-Power CMOS Circuits: Technology, Logic Design, and CAD Tools supplies authoritative information on how to design and model for high performance with low power consumption in modern integrated circuits. It is a must-read for anyone designing modern computers or embedded systems.

Download or read book Dedicated Digital Processors written by F. Mayer-Lindenberg and published by John Wiley & Sons. This book was released on 2004-04-02 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent evolution of digital technology has resulted in the design of digital processors with increasingly complex capabilities. The implementation of hardware/software co-design methodologies provides new opportunities for the development of low power, high speed DSPs and processor networks. Dedicated digital processors are digital processors with an application specific computational task. Dedicated Digital Processors presents an integrated and accessible approach to digital processor design principles, processes, and implementations based upon the author's considerable experience in teaching digital systems design and digital signal processing. Emphasis is placed on presentation of hardware/software co-design methods, with examples and illustrations provided throughout the text. System-on-a-chip and embedded systems are described and examples of high speed real-time processing are given. Coverage of standard and emerging DSP architectures enable the reader to make an informed selection when undertaking their own designs. Presents readers with the elementary building blocks for the design of digital hardware systems and processor networks Provides a unique evaluation of standard DSP architectures whilst providing up-to-date information on the latest architectures, including the TI 55x and TigerSharc chip families and the Virtex FPGA (field-programmable gate array) Introduces the concepts and methodologies for describing and designing hardware VHDL is presented and used to illustrate the design of a simple processor A practical overview of hardware/software codesign with design techniques and considerations illustrated with examples of real-world designs Fundamental reading for graduate and senior undergraduate students of computer and electronic engineering, and Practicing engineers developing DSP applications.

Download or read book Heterogeneous Multicore Processor Technologies for Embedded Systems written by Kunio Uchiyama and published by Springer Science & Business Media. This book was released on 2012-04-23 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: To satisfy the higher requirements of digitally converged embedded systems, this book describes heterogeneous multicore technology that uses various kinds of low-power embedded processor cores on a single chip. With this technology, heterogeneous parallelism can be implemented on an SoC, and greater flexibility and superior performance per watt can then be achieved. This book defines the heterogeneous multicore architecture and explains in detail several embedded processor cores including CPU cores and special-purpose processor cores that achieve highly arithmetic-level parallelism. The authors developed three multicore chips (called RP-1, RP-2, and RP-X) according to the defined architecture with the introduced processor cores. The chip implementations, software environments, and applications running on the chips are also explained in the book. Provides readers an overview and practical discussion of heterogeneous multicore technologies from both a hardware and software point of view; Discusses a new, high-performance and energy efficient approach to designing SoCs for digitally converged, embedded systems; Covers hardware issues such as architecture and chip implementation, as well as software issues such as compilers, operating systems, and application programs; Describes three chips developed according to the defined heterogeneous multicore architecture, including chip implementations, software environments, and working applications.

Download or read book Multi Processor System on Chip 1 written by Liliana Andrade and published by John Wiley & Sons. This book was released on 2021-03-12 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Multi-Processor System-on-Chip (MPSoC) is the key component for complex applications. These applications put huge pressure on memory, communication devices and computing units. This book, presented in two volumes – Architectures and Applications – therefore celebrates the 20th anniversary of MPSoC, an interdisciplinary forum that focuses on multi-core and multi-processor hardware and software systems. It is this interdisciplinarity which has led to MPSoC bringing together experts in these fields from around the world, over the last two decades. Multi-Processor System-on-Chip 1 covers the key components of MPSoC: processors, memory, interconnect and interfaces. It describes advance features of these components and technologies to build efficient MPSoC architectures. All the main components are detailed: use of memory and their technology, communication support and consistency, and specific processor architectures for general purposes or for dedicated applications.

Download or read book MULTICORE SYSTEMS ON CHIP written by Ben Abadallah Abderazek and published by Springer Science & Business Media. This book was released on 2010-08-01 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional on-chip communication design mostly use ad-hoc approaches that fail to meet the challenges posed by the next-generation MultiCore Systems on-chip (MCSoC) designs. These major challenges include wiring delay, predictability, diverse interconnection architectures, and power dissipation. A Network-on-Chip (NoC) paradigm is emerging as the solution for the problems of interconnecting dozens of cores into a single system on-chip. However, there are many problems associated with the design of such systems. These problems arise from non-scalable global wire delays, failure to achieve global synchronization, and difficulties associated with non-scalable bus-based functional interconnects. The book consists of three parts, with each part being subdivided into four chapters. The first part deals with design and methodology issues. The architectures used in conventional methods of MCSoCs design and custom multiprocessor architectures are not flexible enough to meet the requirements of different application domains and not scalable enough to meet different computation needs and different complexities of various applications. Several chapters of the first part will emphasize on the design techniques and methodologies. The second part covers the most critical part of MCSoCs design — the interconnections. One approach to addressing the design methodologies is to adopt the so-called reusability feature to boost design productivity. In the past years, the primitive design units evolved from transistors to gates, finite state machines, and processor cores. The network-on-chip paradigm offers this attractive property for the future and will be able to close the productivity gap. The last part of this book delves into MCSoCs validations and optimizations. A more qualitative approach of system validation is based on the use of formal techniques for hardware design. The main advantage of formal methods is the possibility to prove the validity of essential design requirements. As formal languages have a mathematical foundation, it is possible to formally extract and verify these desired properties of the complete abstract state space. Online testing techniques for identifying faults that can lead to system failure are also surveyed. Emphasis is given to analytical redundancy-based techniques that have been developed for fault detection and isolation in the automatic control area.

Download or read book Embedded Memory Design for Multi Core and Systems on Chip written by Baker Mohammad and published by Springer Science & Business Media. This book was released on 2013-10-22 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the various tradeoffs systems designers face when designing embedded memory. Readers designing multi-core systems and systems on chip will benefit from the discussion of different topics from memory architecture, array organization, circuit design techniques and design for test. The presentation enables a multi-disciplinary approach to chip design, which bridges the gap between the architecture level and circuit level, in order to address yield, reliability and power-related issues for embedded memory.

Download or read book Processor Design written by Jari Nurmi and published by Springer Science & Business Media. This book was released on 2007-07-26 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is an extremely useful book that provides insight into a number of different flavors of processor architectures and their design, software tool generation, implementation, and verification. After a brief introduction to processor architectures and how processor designers have sometimes failed to deliver what was expected, the authors introduce a generic flow for embedded on-chip processor design and start to explore the vast design space of on-chip processing. The authors cover a number of different types of processor core.