Download or read book Low Power CMOS Digital Pixel Imagers for High Speed Uncooled PbSe IR Applications written by Josep Maria Margarit and published by Springer. This book was released on 2016-12-29 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of a new low-cost medium wavelength IR (MWIR) monolithic imager technology for high-speed uncooled industrial applications. It takes the baton on the latest technological advances in the field of vapor phase deposition (VPD) PbSe-based MWIR detection accomplished by the industrial partner NIT S.L., adding fundamental knowledge on the investigation of novel VLSI analog and mixed-signal design techniques at circuit and system levels for the development of the readout integrated device attached to the detector. In order to fulfill the operational requirements of VPD PbSe, this work proposes null inter-pixel crosstalk vision sensor architectures based on a digital-only focal plane array (FPA) of configurable pixel sensors. Each digital pixel sensor (DPS) cell is equipped with fast communication modules, self-biasing, offset cancellation, analog-to-digital converter (ADC) and fixed pattern noise (FPN) correction. In-pixel power consumption is minimized by the use of comprehensive MOSFET subthreshold operation.
Download or read book Infrared Detectors and Emitters Materials and Devices written by Peter Capper and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date view of the various detector/emitter materials systems currently in use or being actively researched. The book is aimed at newcomers and those already working in the IR industry. It provides both an introductory text and a valuable overview of the entire field.
Download or read book Infrared Photon Detectors written by Antoni Rogalski and published by SPIE-International Society for Optical Engineering. This book was released on 1995 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Infrared Thermal Imaging written by Michael Vollmer and published by John Wiley & Sons. This book was released on 2018-02-20 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new up-to-date edition of the successful handbook and ready reference retains the proven concept of the first, covering basic and advanced methods and applications in infrared imaging from two leading expert authors in the field. All chapters have been completely revised and expanded and a new chapter has been added to reflect recent developments in the field and report on the progress made within the last decade. In addition there is now an even stronger focus on real-life examples, with 20% more case studies taken from science and industry. For ease of comprehension the text is backed by more than 590 images which include graphic visualizations and more than 300 infrared thermography figures. The latter include many new ones depicting, for example, spectacular views of phenomena in nature, sports, and daily life.
Download or read book Infrared Detectors written by Antonio Rogalski and published by CRC Press. This book was released on 2010-11-15 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and reorganized while retaining the approachable style of the first edition, Infrared Detectors, Second Edition addresses the latest developments in the science and technology of infrared (IR) detection. Antoni Rogalski, an internationally recognized pioneer in the field, covers the comprehensive range of subjects necessary to un
Download or read book Quantum Dot Photodetectors written by Xin Tong and published by Springer Nature. This book was released on 2021-09-17 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of state-of-the-art quantum dot photodetectors, including device fabrication technologies, optical engineering/manipulation strategies, and emerging photodetectors with building blocks of novel quantum dots (e.g. perovskite) as well as their hybrid structured (e.g. 0D/2D) materials. Semiconductor quantum dots have attracted much attention due to their unique quantum confinement effect, which allows for the facile tuning of optical properties that are promising for next-generation optoelectronic applications. Among these remarkable properties are large absorption coefficient, high photosensitivity, and tunable optical spectrum from ultraviolet/visible to infrared region, all of which are very attractive and favorable for photodetection applications. The book covers both fundamental and frontier research in order to stimulate readers' interests in developing novel ideas for semiconductor photodetectors at the center of future developments in materials science, nanofabrication technology and device commercialization. The book provides a knowledge sharing platform and can be used as a reference for researchers working in the fields of photonics, materials science, and nanodevices.
Download or read book Antimonide based Infrared Detectors written by Antoni Rogalski and published by SPIE-International Society for Optical Engineering. This book was released on 2017-09 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Among the many materials investigated in the infrared (IR) field, narrow-gap semiconductors are the most important in IR photon detector family. Although the first widely used narrow-gap materials were lead salts (during the 1950s, IR detectors were built using single-element-cooled PbS and PbSe photoconductive detectors, primary for anti-missile seekers), this semiconductor family was not well distinguished. This situation seems to have resulted from two reasons: the preparation process of lead salt photoconductive polycrystalline detectors was not well understood and could only be reproduced with well-tried recipes; and the theory of narrow-gap semiconductor bandgap structure was not well known for correct interpretation of the measured transport and photoelectrical properties of these materials"--
Download or read book Principles of Power Integrity for PDN Design Simplified written by Larry D. Smith and published by Prentice Hall. This book was released on 2017-04-06 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consistently Design PDNs That Deliver Reliable Performance at the Right Cost Too often, PDN designs work inconsistently, and techniques that work in some scenarios seem to fail inexplicably in others. This book explains why and presents realistic processes for getting PDN designs right in any new product. Drawing on 60+ years of signal and power integrity experience, Larry Smith and Eric Bogatin show how to manage noise and electrical performance, and complement intuition with analysis to balance cost, performance, risk, and schedule. Throughout, they distill the essence of complex real-world problems, quantify core principles via approximation, and apply them to specific examples. For easy usage, dozens of key concepts and observations are highlighted as tips and listed in quick, chapter-ending summaries. Coverage includes • A practical, start-to-finish approach to consistently meeting PDN performance goals • Understanding how signals interact with interconnects • Identifying root causes of common problems, so you can avoid them • Leveraging analysis tools to efficiently explore design space and optimize tradeoffs • Analyzing impedance-related properties of series and parallel RLC circuits • Measuring low impedance for components and entire PDN ecologies • Predicting loop inductance from physical design features • Reducing peak impedances from combinations of capacitors • Understanding power and ground plane properties in the PDN interconnect • Taming signal integrity problems when signals change return planes • Reducing peak impedance created by on-die capacitance and package lead inductance • Controlling transient current waveform interactions with PDN features • Simple spreadsheet-based analysis techniques for quickly creating first-pass designs This guide will be indispensable for all engineers involved in PDN design, including product, board, and chip designers; system, hardware, component, and package engineers; power supply designers, SI and EMI engineers, sales engineers, and their managers.
Download or read book Proceedings of the Scientific Practical Conference Research and Development 2016 written by K. V. Anisimov and published by Springer. This book was released on 2017-12-04 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book relates to the III Annual Conference hosted by The Ministry of Education and Science of the Russian Federation in December 2016. This event has summarized, analyzed and discussed the interim results, academic outputs and scientific achievements of the Russian Federal Targeted Programme “Research and Development in Priority Areas of Development of the Russian Scientific and Technological Complex for 2014–2020.” It contains 75 selected papers from 6 areas considered priority by the Federal Targeted Programme: computer science, ecology & environment sciences; energy and energy efficiency; lifesciences; nanoscience & nanotechnology and transport & communications. The chapters report the results of the 3-years research projects supported by the Programme and finalized in 2016.
Download or read book Laser Radar written by National Research Council and published by National Academies Press. This book was released on 2014-03-14 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's world, the range of technologies with the potential to threaten the security of U.S. military forces is extremely broad. These include developments in explosive materials, sensors, control systems, robotics, satellite systems, and computing power, to name just a few. Such technologies have not only enhanced the capabilities of U.S. military forces, but also offer enhanced offensive capabilities to potential adversaries - either directly through the development of more sophisticated weapons, or more indirectly through opportunities for interrupting the function of defensive U.S. military systems. Passive and active electro-optical (EO) sensing technologies are prime examples. Laser Radar considers the potential of active EO technologies to create surprise; i.e., systems that use a source of visible or infrared light to interrogate a target in combination with sensitive detectors and processors to analyze the returned light. The addition of an interrogating light source to the system adds rich new phenomenologies that enable new capabilities to be explored. This report evaluates the fundamental, physical limits to active EO sensor technologies with potential military utility; identifies key technologies that may help overcome the impediments within a 5-10 year timeframe; considers the pros and cons of implementing each existing or emerging technology; and evaluates the potential uses of active EO sensing technologies, including 3D mapping and multi-discriminate laser radar technologies.
Download or read book Handbook of Optoelectronics written by John P. Dakin and published by CRC Press. This book was released on 2017-10-05 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Optoelectronics offers a self-contained reference from the basic science and light sources to devices and modern applications across the entire spectrum of disciplines utilizing optoelectronic technologies. This second edition gives a complete update of the original work with a focus on systems and applications. Volume I covers the details of optoelectronic devices and techniques including semiconductor lasers, optical detectors and receivers, optical fiber devices, modulators, amplifiers, integrated optics, LEDs, and engineered optical materials with brand new chapters on silicon photonics, nanophotonics, and graphene optoelectronics. Volume II addresses the underlying system technologies enabling state-of-the-art communications, imaging, displays, sensing, data processing, energy conversion, and actuation. Volume III is brand new to this edition, focusing on applications in infrastructure, transport, security, surveillance, environmental monitoring, military, industrial, oil and gas, energy generation and distribution, medicine, and free space. No other resource in the field comes close to its breadth and depth, with contributions from leading industrial and academic institutions around the world. Whether used as a reference, research tool, or broad-based introduction to the field, the Handbook offers everything you need to get started. John P. Dakin, PhD, is professor (emeritus) at the Optoelectronics Research Centre, University of Southampton, UK. Robert G. W. Brown, PhD, is chief executive officer of the American Institute of Physics and an adjunct full professor in the Beckman Laser Institute and Medical Clinic at the University of California, Irvine.
Download or read book Principles of Infrared Technology written by John Lester Miller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about general infrared (IR) engineering, technology, practices, and principles as they apply to modem imaging systems. An alternative title to this book with appeal to managers and marketing personnel might be "Everything You Always Wanted to Know about Infrared Sensors, but Couldn't Get Answers on from Engineers." This book is not meant to be a comprehensive compendium of IR (like the Infrared and Electro Optical Systems Handbook). Rather, it is intend ed to complement such texts by providing up to date information and pragmatic knowledge that is difficult to locate outside of periodicals. The information contained in this book is critical in the day-to-day life of en gineering practitioners, proposal writers, and those on the periphery of an IR pro gram. It serves as a guide for engineers wishing to "catch up," engineers new to the field, managers, students, administrators, and technicians. It is also useful for seasoned IR engineers who want to review recent technological developments.
Download or read book New Worlds New Horizons in Astronomy and Astrophysics written by National Research Council and published by National Academies Press. This book was released on 2011-02-04 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Driven by discoveries, and enabled by leaps in technology and imagination, our understanding of the universe has changed dramatically during the course of the last few decades. The fields of astronomy and astrophysics are making new connections to physics, chemistry, biology, and computer science. Based on a broad and comprehensive survey of scientific opportunities, infrastructure, and organization in a national and international context, New Worlds, New Horizons in Astronomy and Astrophysics outlines a plan for ground- and space- based astronomy and astrophysics for the decade of the 2010's. Realizing these scientific opportunities is contingent upon maintaining and strengthening the foundations of the research enterprise including technological development, theory, computation and data handling, laboratory experiments, and human resources. New Worlds, New Horizons in Astronomy and Astrophysics proposes enhancing innovative but moderate-cost programs in space and on the ground that will enable the community to respond rapidly and flexibly to new scientific discoveries. The book recommends beginning construction on survey telescopes in space and on the ground to investigate the nature of dark energy, as well as the next generation of large ground-based giant optical telescopes and a new class of space-based gravitational observatory to observe the merging of distant black holes and precisely test theories of gravity. New Worlds, New Horizons in Astronomy and Astrophysics recommends a balanced and executable program that will support research surrounding the most profound questions about the cosmos. The discoveries ahead will facilitate the search for habitable planets, shed light on dark energy and dark matter, and aid our understanding of the history of the universe and how the earliest stars and galaxies formed. The book is a useful resource for agencies supporting the field of astronomy and astrophysics, the Congressional committees with jurisdiction over those agencies, the scientific community, and the public.
Download or read book Integrated Imaging and Vision Techniques for Industrial Inspection written by Zheng Liu and published by Springer. This book was released on 2015-09-24 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This pioneering text/reference presents a detailed focus on the use of machine vision techniques in industrial inspection applications. An internationally renowned selection of experts provide insights on a range of inspection tasks, drawn from their cutting-edge work in academia and industry, covering practical issues of vision system integration for real-world applications. Topics and features: presents a comprehensive review of state-of-the-art hardware and software tools for machine vision, and the evolution of algorithms for industrial inspection; includes in-depth descriptions of advanced inspection methodologies and machine vision technologies for specific needs; discusses the latest developments and future trends in imaging and vision techniques for industrial inspection tasks; provides a focus on imaging and vision system integration, implementation, and optimization; describes the pitfalls and barriers to developing successful inspection systems for smooth and efficient manufacturing process.
Download or read book Photonic Instrumentation Engineering written by Society of Photo-optical Instrumentation Engineers (United States) and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronic Portable Instruments written by Halit Eren and published by CRC Press. This book was released on 2003-10-16 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the availability of advanced technologies, digital systems, and communications, portable instruments are rapidly evolving from simple, stand alone, low-accuracy measuring instruments to complex multifunctional, network integrated, high-performance digital devices with advanced interface capabilities. The relatively brief treatments these instr
Download or read book Mems Packaging written by Yung-cheng Lee and published by World Scientific. This book was released on 2018-01-03 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS sensors and actuators are enabling components for smartphones, AR/VR, and wearable electronics. MEMS packaging is recognized as one of the most critical activities to design and manufacture reliable MEMS. A unique challenge to MEMS packaging is how to protect moving MEMS devices during manufacturing and operation. With the introduction of wafer level capping and encapsulation processes, this barrier is removed successfully. In addition, MEMS devices should be integrated with their electronic chips with the smallest footprint possible. As a result, 3D packaging is applied to connect the devices vertically for the most effective integration. Such 3D packaging also paves the way for further heterogenous integration of MEMS devices, electronics, and other functional devices.This book consists of chapters written by leaders developing products in a MEMS industrial setting and faculty members conducting research in an academic setting. After an introduction chapter, the practical issues are covered: through-silicon vias (TSVs), vertical interconnects, wafer level packaging, motion sensor-to-CMOS bonding, and use of printed circuit board technology to fabricate MEMS. These chapters are written by leaders developing MEMS products. Then, fundamental issues are discussed, topics including encapsulation of MEMS, heterogenous integration, microfluidics, solder bonding, localized sealing, microsprings, and reliability.
