Download or read book Low Binder Concrete and Mortars written by Jorge de Brito and published by MDPI. This book was released on 2020-12-06 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of a Special Issue published in Applied Sciences entitled “Low Binder Concrete and Mortars". The main aim of this work is to highlight practical approaches that facilitate the production of low binder content concrete and mortar with an acceptable level of technical performance (e.g., mechanical and durability) and environmental impacts (e.g., ecotoxicological and global warming). Its contents are organized in the following sections: Developing Zero-Cement Binder; Ecotoxicological and Chemical Characteristics of the Non-conventional Materials Used to Replace Cement and Natural Aggregates; Reduce the Environmental Impacts and Resources Use of Binders; Modify the Characteristics of the Cement-Based Materials; Low Binder Concrete On-Site Application; Sustainable Cement-Based Materials in Road Engineering.
Download or read book Low Binder Concrete and Mortars written by Jorge de Brito and published by . This book was released on 2020 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of a Special Issue published in Applied Sciences entitled “Low Binder Concrete and Mortars". The main aim of this work is to highlight practical approaches that facilitate the production of low binder content concrete and mortar with an acceptable level of technical performance (e.g., mechanical and durability) and environmental impacts (e.g., ecotoxicological and global warming). Its contents are organized in the following sections: Developing Zero-Cement Binder; Ecotoxicological and Chemical Characteristics of the Non-conventional Materials Used to Replace Cement and Natural Aggregates; Reduce the Environmental Impacts and Resources Use of Binders; Modify the Characteristics of the Cement-Based Materials; Low Binder Concrete On-Site Application; Sustainable Cement-Based Materials in Road Engineering.
Download or read book Handbook of Alkali Activated Cements Mortars and Concretes written by F. Pacheco-Torgal and published by Elsevier. This book was released on 2014-11-20 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an updated state-of-the-art review on new developments in alkali-activation. The main binder of concrete, Portland cement, represents almost 80% of the total CO2 emissions of concrete which are about 6 to 7% of the Planet’s total CO2 emissions. This is particularly serious in the current context of climate change and it could get even worse because the demand for Portland cement is expected to increase by almost 200% by 2050 from 2010 levels, reaching 6000 million tons/year. Alkali-activated binders represent an alternative to Portland cement having higher durability and a lower CO2 footprint. Reviews the chemistry, mix design, manufacture and properties of alkali-activated cement-based concrete binders Considers performance in adverse environmental conditions. Offers equal emphasis on the science behind the technology and its use in civil engineering.
Download or read book Improving Concrete and Mortar using Modified Ash and Slag Cements written by Leonid Dvorkin and published by CRC Press. This book was released on 2020-04-18 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of concrete and mortar containing coal fly ash, blast furnace slag, and other dispersed technogenic materials is one of the major areas of potential resource savings and improving the environmental efficiency and sustainability of construction. Improving Concrete and Mortar using Modified Ash and Slag Cements presents the results of a study of high-tech concrete on composite Portland cement and slag Portland cement. It explains the possibility of significantly improving the properties of cements and concrete with the introduction of superplasticizers and hardening activators. Features: Describes how additives can reduce costs and lead to more environmentally sustainable production Explains the possibility of obtaining high-tech concrete with a high content of ash, slag, and clinker kiln dust Presents the possibility of significant reductions of the most energy-intensive component of cements Examines the calculated dependences for predicting the technical properties of concrete saturated with dispersed technogenic products Explains the methods of calculating the composition of concrete with specified properties of low-clinker cements Suitable for civil and structural engineers as well as for specialists working in the field of concrete technology, students of civil engineering, and researchers of new construction technologies, this book allows readers to understand new and sustainable ways to improve the properties of concrete and mortar by utilizing additives.
Download or read book Handbook of Polymer Modified Concrete and Mortars written by Yoshihiko Ohama and published by William Andrew. This book was released on 1995-12-31 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mortar and concrete made with portland cement has been a popular construction material in the world for the past 170 years or more. However, cement mortar and concrete have some disadvantages such as delayed hardening, low tensile strength, large drying shrinkage and low chemical resistance. To reduce these disadvantages, polymers have been utilized as an additive. Polymer-modified or polymer cement mortar (PCM) and concrete (PCC) are the materials which are made by partially replacing the cement hydrate binders of conventional cement mortar or concrete, with polymers. This book deals with the principles of polymer modification for cement composites, the process technology, properties and applications of the polymer-modified mortar and concrete, and special polymer-modified systems such as M DF cement, antiwashout underwater concrete, polymer-ferrocement, and artificial I wood. The polymeric admixtures or cement modifiers include latexes or emulsions, redispersible polymer powders, water-soluble polymers, liquid resins and monomers. This book describes the current knowledge and information of polymer-modified mortars and concretes, and discusses or reviews the following items in detail: 1. Principles of polymer modification for cement composites. 2. Process technology of polymer-modified mortars and concretes. 3. Properties of polymer-modified mortars and concretes. 4. Applications of polymer-modified mortars and concretes. 5. Special polymer-modified systems such as MDF cements, antiwashout underwater concretes, polymer-ferrocements, and artificial woods.
Download or read book Handbook of Low Carbon Concrete written by Ali Nazari and published by Butterworth-Heinemann. This book was released on 2016-09-30 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Low Carbon Concrete brings together the latest breakthroughs in the design, production, and application of low carbon concrete. In this handbook, the editors and contributors have paid extra attention to the emissions generated by coarse aggregates, emissions due to fine aggregates, and emissions due to cement, fly ash, GGBFS, and admixtures. In addition, the book provides expert coverage on emissions due to concrete batching, transport and placement, and emissions generated by typical commercially produced concretes. Includes the tools and methods for reducing the emissions of greenhouse gases Explores technologies, such as carbon capture, storage, and substitute cements Provides essential data that helps determine the unique factors involved in designing large, new green cement plants
Download or read book Improving Concrete and Mortar using Modified Ash and Slag Cements written by Leonid Dvorkin and published by CRC Press. This book was released on 2020-04-18 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of concrete and mortar containing coal fly ash, blast furnace slag, and other dispersed technogenic materials is one of the major areas of potential resource savings and improving the environmental efficiency and sustainability of construction. Improving Concrete and Mortar using Modified Ash and Slag Cements presents the results of a study of high-tech concrete on composite Portland cement and slag Portland cement. It explains the possibility of significantly improving the properties of cements and concrete with the introduction of superplasticizers and hardening activators. Features: Describes how additives can reduce costs and lead to more environmentally sustainable production Explains the possibility of obtaining high-tech concrete with a high content of ash, slag, and clinker kiln dust Presents the possibility of significant reductions of the most energy-intensive component of cements Examines the calculated dependences for predicting the technical properties of concrete saturated with dispersed technogenic products Explains the methods of calculating the composition of concrete with specified properties of low-clinker cements Suitable for civil and structural engineers as well as for specialists working in the field of concrete technology, students of civil engineering, and researchers of new construction technologies, this book allows readers to understand new and sustainable ways to improve the properties of concrete and mortar by utilizing additives.
Download or read book Improving Cementitious Properties of Blended Pozzolan Based Materials for Construction of Low Cost Buildings in Mbeya Region Tanzania written by Duwa Hamisi Chengula and published by kassel university press GmbH. This book was released on 2018-02-28 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study therefore investigated and improved cementitious properties of pozzolan blended with calcium hydroxide, gypsum and cement in order to extend its use from low strength mortars to concrete works which can be used for low to medium rise structural applications. Characterization, strength tests and durability tests were performed on pozzolan mixtures under laboratory conditions and the effects of adding gypsum to pozzolan and calcium hydroxide mixtures on the compressive strength and durability of cured concrete specimens were investigated.
Download or read book Polymers in Concrete written by Satish Chandra and published by CRC Press. This book was released on 2020-08-11 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This broad-based, introductory reference provides excellent discussions regarding the hydration of Portland cement, durability problems in concrete, mechanisms of concrete deterioration, and interaction of polymers in concrete. It also covers properties of concrete with added polymers and practical applications of polymers in concrete. The historic background of polymers in building materials is examined, and a comprehensive comparison of natural vs. synthetic polymers is provided and conveniently summarized in a tabular format.
Download or read book Eco efficient Rendering Mortars written by Catarina Brazao Farinha and published by Woodhead Publishing. This book was released on 2021-04-15 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-Efficient Rendering Mortars: Use of Recycled Materials focuses on the use of waste materials into cement-based renders, discussing the origins, treatment processes and properties of relevant wastes. The book dispels mistrust through demonstrating the technical feasibility and environmental benefits of eco-efficient rendering mortars. It considers the characteristics of different waste products, such as aggregates, fillers, binders and additions. The functional requirements of renders are also discussed alongside their impact. Finally, the title considers the lifecycle and durability of modified mortars. This book offers robust support and clear guidance on the use of wastes as a substitute for natural aggregates and binders. Presents evidence supporting the use of wastes as a substitute for natural aggregates and binders Characterizes wastes and considers how to best incorporate different kinds of waste into renders Gives details on the technical efficiency and environmental impact of different waste materials on mortars Analyzes the impact of wastes on render performance in terms of fresh state, mechanical, water and durability Considers the lifecycle assessment and durability of modified mortars
Download or read book InCIEC 2015 written by Marina Yusoff and published by Springer. This book was released on 2016-06-18 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: The special focus of these proceedings is on the areas of infrastructure engineering and sustainability management. They provide detailed information on innovative research developments in construction materials and structures, in addition to a compilation of interdisciplinary findings combining nano-materials and engineering. The coverage of cutting-edge infrastructure and sustainability issues in engineering includes earthquakes, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems.
Download or read book Latex modified Concretes and Mortars written by V. Ramakrishnan and published by Transportation Research Board. This book was released on 1992 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis wil be of interest to materials engineers, construction engineers, maintenance engineers, pavement contractors and others interested in the use of latex-modified mortars (LMM) and concretes ( LMC). Information is provided on material properties of various LMM and LMC, as well as current construction practices used for LMM and LMC. Potential applications for LMM and LMC are also included. The use of innovative modified portland cement mortars and concretes for construction and maintenance applications is growing. This report of the Transportation Research Board describes the current state of the practice with respect to the use of latex-modified portland cement concretes and mortars. The extent of use of each material (including case histories), based on results of surveys of state highway agencies and a review of the literature, is summarized.
Download or read book Characteristics and Uses of Steel Slag in Building Construction written by Ivanka Netinger Grubeša and published by Woodhead Publishing. This book was released on 2016-05-20 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characteristics and Uses of Steel Slag in Building Construction focuses predominantly on the utilization of ferrous slag (blast furnace and steel slag) in building construction. This extensive literature review discusses the worldwide utilization of ferrous slag and applications in all sectors of civil engineering, including structural engineering, road construction, and hydro-technical structures. It presents cutting-edge research on the characteristics and properties of ferrous slag, and its overall impact on the environment. Comprehensively reviews the literature on the use of blast furnace and steel slag in civil engineering Examines the environmental impact of slag production and its effect on human health Presents cutting-edge research from worldwide studies on the use of blast furnace and steel slag
Download or read book A Compendium of Information on Selected Low cost Building Materials written by United Nations Centre for Human Settlements and published by UN-HABITAT. This book was released on 1988 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Science and Technology of Cement and other Hydraulic Binders written by Vipin Kant Singh and published by Elsevier. This book was released on 2023-02-21 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Cement and other Hydraulic Binders covers the design of Portland Cement composition using the ideas and formulae of earlier scientists, including the calculation of proportions of different cement phases formed during processing. Other chapters cover cement manufacture by dry, semi-dry or wet processes using rotary and shaft kilns. Particular attention is given to the physical changes that occur in the raw mix when affected by chemical processes. The chemistry of clinker formation which is concerned chiefly with high temperature reactions in the solid-state phase or reactions in the presence of the liquid phase is also discussed. Users will find the latest information on the storage of cement, its packing and handling, hydration and setting, Gypsum, different mineral additions, and advances in special and newer cements, including blended cements, Portland slag cement, Pozzolanic cements, high alumina cements, high-strength cement-based materials, fiber-reinforced cement, non-Portland cements and lime. Covers raw materials, cement design and manufacturing, fuels used in manufacturing, phase balances, clinker training, hydration and setting Includes various types of cement, mineral additions, high strength cement and different cement-based materials Presents information on activated alkaline materials, recycled cements and novel additions Discusses future trends in cement manufacturing and the circular economy Contains a high number of figures, tables and reference data
Download or read book Concrete Under Severe Conditions written by Koji Sakai and published by Taylor & Francis US. This book was released on 1995 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Second RILEM International Conference on Concrete and Digital Fabrication written by Freek P. Bos and published by Springer Nature. This book was released on 2020-07-08 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.
