Download or read book Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystalline Materials written by Peter Klimanek and published by . This book was released on 2002 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last few years have witnessed a rapidly growing interest in the explanation and interpretation of the mesoscale microstructures which occur in distorted crystalline objects such as, for instance, conventional plastically deformed metals and alloys, as well as high-performance materials including ultra-fine grained polycrystals, nanocrystals and thin films.
Download or read book Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystalline Materials written by P. Klimanek and published by Trans Tech Publications Ltd. This book was released on 2002-02-01 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The last few years have witnessed a rapidly growing interest in the explanation and interpretation of the mesoscale microstructures which occur in distorted crystalline objects such as, for instance, conventional plastically deformed metals and alloys, as well as high-performance materials including ultra-fine grained polycrystals, nanocrystals and thin films.
Download or read book Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystalline Materials written by and published by . This book was released on 2002 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last few years have witnessed a rapidly growing interest in the explanation and interpretation of the mesoscale microstructures which occur in distorted crystalline objects such as, for instance, conventional plastically deformed metals and alloys, as well as high-performance materials including ultra-fine grained polycrystals, nanocrystals and thin films. This book describes experimental and theoretical research on distorted crystalline materials, and the interpretation of local lattice rotations by means of both dislocation and disclination theory. The general aim is to stimulate those scientists working in solid-state physics and materials science to use these theories as new and efficient tools for microstructure modeling, analysis and interpretation.
Download or read book International Conference on Martensitic Transformations ICOMAT 2008 written by Gregory Olson and published by John Wiley & Sons. This book was released on 2013-10-09 with total page 1617 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the week of June 29 - July 5, 2008, over 300 scientists and engineers from 30 countries spanning five continents converged at the historic La Fonda Hotel in the city of Santa Fe, New Mexico, USA to participate in the 12th International Conference on Martensitic Transformations (ICOMAT-08) to fathom the peculiar world of certain crystalline materials that undergo structural change when cooled or stressed. Many of these materials can restore their original shape when reheated, thus the name "Shape Memory Alloys". In the spirit of Santa Fe, a central theme of ICOMAT-08 was INTEGRATION across many dimensions.
Download or read book Applied Crystallography Proceedings Of The Xix Conference written by Danuta Stroz and published by World Scientific. This book was released on 2004-04-16 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to propagate the newest achievements of applied crystallography among crystallographers, solid state physicists and materials scientists. It presents application of structural studies to materials used in industrial practice rather than those associated with the crystal structure determination only.The proceedings have been selected for coverage in:• Materials Science Citation Index®• Index to Scientific & Technical Proceedings® (ISTP® / ISI Proceedings)• Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)• CC Proceedings — Engineering & Physical Sciences
Download or read book Nanostructures Synthesis Functional Properties and Application written by Thomas Tsakalakos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Study Institute on Synthesis, Functional Properties and Applications of Nanostructures, held at the Knossos Royal Village, Heraklion, Crete, Greece, July 26, 2002 - August 4, 2002, successfully reviewed the state-of-the-art of nanostructures and nanotechnology. It was concluded that Nanotechnology is widely agreed to be the research focus that will lead to the next generation of breakthroughs in science and engineering. There are three cornerstones to the expectation that Nanotechnology will yield revolutionary advances in understanding and application: • Breakthroughs in properties that arise from materials fabricated from the nanoscale. • Synergistic behavior that arise from the combination of disparate types of materials (soft vs. hard, organic vs. inorganic, chemical vs. biological vs. solid state) at the nanoscale. • Exploitation of natural (e.g. chemical and biological) assembly mechanisms that can accomplish structural control at the nanoscale. It is expected that this will lead to paradigms for assembling bio-inspired functional systems that accomplish desirable properties that are either unavailable or prohibitively expensive using top-down approaches.
Download or read book Diffusion and Defect Data written by and published by . This book was released on 2002 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic Deformation in Nanocrystalline Materials written by Mikhail Gutkin and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: It seems there is no special need to comment on the term 'nanostructure' now, when one often meets the 'nano' words not only in scientific journals but even in newspapers. Moreover, today they are even to be heard in TV and radio programmes. In academic science, where the terms 'nanostructure' and 'nan otechnology' have been extremely popular since the early 1990s, they have been successfully extended to the sphere of economics and business, and now to politics. This is quite natural because nanostructures and nanotechnolo gies will surely serve as a basis for the most advanced and highest technology production in the nearest and probably also the remote future. Hence, the struggle to create and occupy its markets is already under way. In this respect, it is of great interest to review data on the dynamics of U. S. Federal Goverment expenditure for nanotechnology [1,2]. In the fiscal years 1997 and 2002, expenditure was approximately US$116 and US$ 697 million, respectively. In the fiscal year 2004, the President's request for US federal in vestment in nanoscale science, engineering and technology is about US$ 849 million [2]. The indicative budget allocated to the Thematic Priority enti tled 'Nanotechnologies and nanosciences, knowledge-based multifunctional materials and new production processes and devices' for the duration 2002- 2006 of the sixth EU Framework Programme for Research and Technological Development is EUR 1300 million [3].
Download or read book Metallic Materials with High Structural Efficiency written by Oleg N. Senkov and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 1998, Prof. Sergey Firstov invited me to the Frantcevych Institute for Problems of Materials Science (IPMS) in Kyiv, Ukraine to discuss possible collaborations in the area of advanced metals research. During this visit, a strong mutual interest was evident in a broad range of structural metals technologies, and a quick friendship was established. Countless subsequent emails and a reciprocal visit to the U. S Air Force Research Laboratory by Prof. Firstov and a team of scientists from IPMS ensued to discuss and detail a broad collaboration in the area of structural metals. Two years after the initial visit, a major investment by the U. S. Air Force Office of Scientific Research (AFOSR) was established to pursue the technologies defined by these interactions. The annual reviews of the AFOSR Ukrainian Metals Initiative were held in late May, a most beautiful time in Kyiv when the lilacs are in bright display and the air is scented with the smell of falling blossoms from the chestnut trees that line the major streets and many parks. The sunny days and mild evenings provide a welcome break from winter, and on weekend evenings festive crowds spill onto the Khreshchatyk, Kyiv’s downtown boulevard, to listen to street musicians, watch jugglers and comedians, or simply to celebrate with friends. The annual reviews featured long days of intensive discussion of technical progress, followed in the evenings by the warm hospitality of the Ukrainian hosts.
Download or read book Nanomaterials by Severe Plastic Deformation written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the "Second International Conference on Nanomaterials by Severe Plastic Deformation" review the enormous scientific avalanche that has been developing in the field over recent years. A valuable resource for any scientist and engineer working in this emerging field of nanotechnology.
Download or read book Journal de physique written by and published by . This book was released on 2001 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 2002 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 5th European Mechanics of Materials Conference on Scale Transitions from Atomistics to Continuum Plasticity written by E. van der Giessen and published by . This book was released on 2001 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Metals Abstracts written by and published by . This book was released on 1981 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigations and Applications of Severe Plastic Deformation written by Terry C. Lowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material processing techniques that employ severe plastic deformation have evolved over the past decade, producing metals, alloys and composites having extraordinary properties. Variants of SPD methods are now capable of creating monolithic materials with submicron and nanocrystalline grain sizes. The resulting novel properties of these materials has led to a growing scientific and commercial interest in them. They offer the promise of bulk nanocrystalline materials for structural; applications, including nanocomposites of lightweight alloys with unprecedented strength. These materials may also enable the use of alternative metal shaping processes, such as high strain rate superplastic forming. Prospective applications for medical, automotive, aerospace and other industries are already under development.
Download or read book Worked Examples in the Geometry of Crystals written by Harshad Kumar Dharamshi Hansraj Bhadeshia and published by CRC Press. This book was released on 1987 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
