Download or read book Gas Turbine Blade Cooling written by Chaitanya D Ghodke and published by SAE International. This book was released on 2018-12-10 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbines play an extremely important role in fulfilling a variety of power needs and are mainly used for power generation and propulsion applications. The performance and efficiency of gas turbine engines are to a large extent dependent on turbine rotor inlet temperatures: typically, the hotter the better. In gas turbines, the combustion temperature and the fuel efficiency are limited by the heat transfer properties of the turbine blades. However, in pushing the limits of hot gas temperatures while preventing the melting of blade components in high-pressure turbines, the use of effective cooling technologies is critical. Increasing the turbine inlet temperature also increases heat transferred to the turbine blade, and it is possible that the operating temperature could reach far above permissible metal temperature. In such cases, insufficient cooling of turbine blades results in excessive thermal stress on the blades causing premature blade failure. This may bring hazards to the engine's safe operation. Gas Turbine Blade Cooling, edited by Dr. Chaitanya D. Ghodke, offers 10 handpicked SAE International's technical papers, which identify key aspects of turbine blade cooling and help readers understand how this process can improve the performance of turbine hardware.

Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.

Download or read book Heat Transfer in Gas Turbines written by Bengt Sundén and published by Witpress. This book was released on 2001 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents and reflects current active research on various heat transfer topics and related phenomena in gas turbine systems. It begins with a general introduction to gas turbine heat transfer, before moving on to specific areas.

Download or read book ASME Technical Papers written by and published by . This book was released on 2001 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the ASME Turbo Expo 2008 written by American Society of Mechanical Engineers and published by Amer Society of Mechanical. This book was released on 2008 with total page 927 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine written by and published by . This book was released on 1999 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the ASME Turbo Expo 2002 Presented at the 2002 ASME Turbo Expo June 3 6 2002 Amsterdam the Netherlands written by and published by . This book was released on 2002 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is Volume 1 of five volumes that comprise the proceedings of the June 2002 conference, sponsored by the International Gas Turbine Institute (IGTI), a technical institute of the American Society of Mechanical Engineers. The purpose of the conference was to facilitate international exchange and development of educational and technical information related to the design, application, manufacture, operation, maintenance, and environmental impact of all types of gas engines. With an emphasis upon the need for more efficient, cleaner, and more reliable gas turbines, the approximately 130 articles cover various technical aspects of aircraft engines; coal, biomass, and alternative fuels; combustion and fuels; education; electric power; and vehicular and small turbomachines. There is no subject index. Annotation c. Book News, Inc., Portland, OR (booknews.com).

Download or read book Introduction to Heat Transfer written by Bengt Sundén and published by WIT Press. This book was released on 2012 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the basic mechanisms for transfer of heat, this book gives a deeper and more comprehensive view than existing titles on the subject. Derivation and presentation of analytical and empirical methods are provided for calculation of heat transfer rates and temperature fields as well as pressure drop. The book covers thermal conduction, forced and natural laminar and turbulent convective heat transfer, thermal radiation including participating media, condensation, evaporation and heat exchangers. This book is aimed to be used in both undergraduate and graduate courses in heat transfer and thermal engineering. It can successfully be used in R & D work and thermal engineering design in industry and by consultancy firms

Download or read book Advanced Fluid Mechanics and Heat Transfer for Engineers and Scientists written by Meinhard T. Schobeiri and published by Springer Nature. This book was released on 2022-01-17 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current book, Advanced Fluid Mechanics and Heat Transfer is based on author's four decades of industrial and academic research in the area of thermofluid sciences including fluid mechanics, aero-thermodynamics, heat transfer and their applications to engineering systems. Fluid mechanics and heat transfer are inextricably intertwined and both are two integral parts of one physical discipline. No problem from fluid mechanics that requires the calculation of the temperature can be solved using the system of Navier-Stokes and continuity equations only. Conversely, no heat transfer problem can be solved using the energy equation only without using the Navier-Stokes and continuity equations. The fact that there is no book treating this physical discipline as a unified subject in a single book that considers the need of the engineering and physics community, motivated the author to write this book. It is primarily aimed at students of engineering, physics and those practicing professionals who perform aero-thermo-heat transfer design tasks in the industry and would like to deepen their knowledge in this area. The contents of this new book covers the material required in Fluid Mechanics and Heat Transfer Graduate Core Courses in the US universities. It also covers the major parts of the Ph.D-level elective courses Advanced Fluid Mechanics and Heat Transfer that the author has been teaching at Texas A&M University for the past three decades.

Download or read book Gas Turbine Performance written by Philip P. Walsh and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: A significant addition to the literature on gas turbine technology, the second edition of Gas Turbine Performance is a lengthy text covering product advances and technological developments. Including extensive figures, charts, tables and formulae, this book will interest everyone concerned with gas turbine technology, whether they are designers, marketing staff or users.

Download or read book Journal of Heat Transfer written by and published by . This book was released on 2003 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Paper written by and published by . This book was released on 2001 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1983 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the ASME Turbo Expo written by and published by . This book was released on 2002 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1986 with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aeronautical Engineering written by and published by . This book was released on 1971 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA)