Download or read book Load and Resistance Factor Design of Bridge Foundations Accounting for Pile Group Soil Interaction written by Fei Han and published by . This book was released on 2016-12-31 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile group foundations are used in most foundation solutions for transportation structures. Rigorous and reliable pile design methods are required to produce designs whose level of safety (probability of failure) is known. By utilizing recently developed, advanced, two-surface plasticity constitutive models, rigorous finite element analyses are conducted. These analyses are for axially loaded single piles and pile groups with several pile-to-pile distances in various group configurations installed in sandy and clayey soil profiles. The analyses shed light on the relationships between the global response of the pile-soil system (development of shaft and base resistances) and the behavior of local soil elements (e.g., shear band formation). The influence of the group configuration, pile-topile spacing, soil profile, and pile head settlement on the group effects are studied. Mechanisms of pile-soil-pile interactions in pile groups are revealed. Pile efficiencies for individual piles and the overall pile group are reported for use in pile group design. The instrumentation, installation, and static and dynamic testing of a closed-ended, driven pipe pile in Marshall County, Indiana is documented. The test results along with two other case histories are used to verify the new Purdue pile design method. Probabilistic analyses are performed to develop resistance factors for the load and resistance factor design, LRFD, of vii pile groups considering both displacement and non-displacement piles, various soil profiles, and two target probabilities of failure. The pile design equations, pile group efficiencies and resistance factors together form the LRFD pile design framework. Two step-by-step design examples are provided to demonstrate the LRFD pile design procedures for single piles and pile groups.
Download or read book Load and Resistance Factor Design LRFD for Deep Foundations written by Samuel G. Paikowsky and published by Transportation Research Board. This book was released on 2004 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction and research approach -- Findings -- Interpretation, appraisal, and applications -- Conclusions and suggested research -- Bibliography -- Appendixes.
Download or read book The Engineering of Foundations Slopes and Retaining Structures written by Rodrigo Salgado and published by CRC Press. This book was released on 2022-06-01 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Engineering of Foundations, Slopes and Retaining Structures rigorously covers the construction, analysis, and design of shallow and deep foundations, as well as retaining structures and slopes. It includes complete coverage of soil mechanics and site investigations. This new edition is a well-designed balance of theory and practice, emphasizing conceptual understanding and design applications. It contains illustrations, applications, and hands-on examples that continue across chapters. Soil mechanics is examined with full explanation of drained versus undrained loading, friction and dilatancy as sources of shear strength, phase transformation, development of peak effective stress ratios, and critical-state and residual shear strength. The design and execution of site investigations is evaluated with complete discussion of the CPT and SPT. Additional topics include the construction, settlement and bearing capacity of shallow foundations, as well as the installation, ultimate resistance and settlement of deep foundations. Both traditional knowledge and methods and approaches based on recent progress are available. Analysis and design of retaining structures and slopes, such as the use of slope stability software stability calculations, is included. The book is ideal for advanced undergraduate students, graduate students and practicing engineers and researchers.
Download or read book Manuals for the Design of Bridge Foundations written by Richard M. Barker and published by Transportation Research Board National Research. This book was released on 1991 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book LRFD Design and Construction of Shallow Foundations for Highway Bridge Structures written by and published by Transportation Research Board. This book was released on 2010 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report develops and calibrates procedures and modifies the AASHTO LRFD Bridge Design Specifications, Section 10-Foundations for the Strength Limit State Design of Shallow Foundations. The material in this report will be of immediate interest to bridge engineers and geotechnical engineers involved in the design of shallow foundations.
Download or read book NCHRP Report 507 written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probabilistic Methods in Geotechnical Engineering written by K.S. Li and published by CRC Press. This book was released on 2020-08-19 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of this conference contain keynote addresses on recent developments in geotechnical reliability and limit state design in geotechnics. It also contains invited lectures on such topics as modelling of soil variability, simulation of random fields and probability of rock joints. Contents: Keynote addresses on recent development on geotechnical reliability and limit state design in geotechnics, and invited lectures on modelling of soil variability, simulation of random field, probabilistic of rock joints, and probabilistic design of foundations and slopes. Other papers on analytical techniques in geotechnical reliability, modelling of soil properties, and probabilistic analysis of slopes, embankments and foundations.
Download or read book Single Piles and Pile Groups Under Lateral Loading written by Lymon C. Reese and published by CRC Press. This book was released on 2010-12-15 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexities of designing piles for lateral loads are manifold as there are many forces that are critical to the design of big structures such as bridges, offshore and waterfront structures and retaining walls. The loads on structures should be supported either horizontally or laterally or in both directions and most structures have in common t
Download or read book The Foundation Engineering Handbook written by Manjriker Gunaratne and published by CRC Press. This book was released on 2013-11-26 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considering how structures interact with soil, and building proper foundations, is vital to ensuring public safety and to the longevity of buildings. Understanding the strength and compressibility of subsurface soil is essential to the foundation engineer. The Foundation Engineering Handbook, Second Edition provides the fundamentals of foundation e
Download or read book Design Guidelines for Increasing the Lateral Resistance of Highway Bridge Pile Foundations by Improving Weak Soils written by Kyle M. Rollins and published by Transportation Research Board. This book was released on 2011 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB’s National Cooperative Highway Research Program (NCHRP) Report 697: Design Guidelines for Increasing the Lateral Resistance of Highway-Bridge Pile Foundations by Improving Weak Soils examines guidance for strengthening of soils to resist lateral forces on bridge pile foundations.
Download or read book Design of Pile Foundations in Liquefiable Soils written by Gopal Madabhushi and published by World Scientific. This book was released on 2010 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile foundations are the most common form of deep foundations that are used both onshore and offshore to transfer large superstructural loads into competent soil strata. This book provides many case histories of failure of pile foundations due to earthquake loading and soil liquefaction. Based on the observed case histories, the possible mechanisms of failure of the pile foundations are postulated. The book also deals with the additional loading attracted by piles in liquefiable soils due to lateral spreading of sloping ground. Recent research at Cambridge forms the backbone of this book with the design methodologies being developed directly based on quantified centrifuge test results and numerical analysis.The book provides designers and practicing civil engineers with a sound knowledge of pile behaviour in liquefiable soils and easy-to-use methods to design pile foundations in seismic regions. For graduate students and researchers, it brings together the latest research findings on pile foundations in a way that is relevant to geotechnical practice.
Download or read book Calibration of Resistance Factors for Load and Resistance Factor Design of Driven Piles for Bridge Foundations written by Yu- Ting Su and published by . This book was released on 2005 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Highway Bridges written by Richard M. Barker and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of bridge design and analysis revised to reflect the fifth edition of the AASHTO LRFD specifications Design of Highway Bridges, Third Edition offers detailed coverage of engineering basics for the design of short- and medium-span bridges. Revised to conform with the latest fifth edition of the American Association of State Highway and Transportation Officials (AASHTO) LRFD Bridge Design Specifications, it is an excellent engineering resource for both professionals and students. This updated edition has been reorganized throughout, spreading the material into twenty shorter, more focused chapters that make information even easier to find and navigate. It also features: Expanded coverage of computer modeling, calibration of service limit states, rigid method system analysis, and concrete shear Information on key bridge types, selection principles, and aesthetic issues Dozens of worked problems that allow techniques to be applied to real-world problems and design specifications A new color insert of bridge photographs, including examples of historical and aesthetic significance New coverage of the "green" aspects of recycled steel Selected references for further study From gaining a quick familiarity with the AASHTO LRFD specifications to seeking broader guidance on highway bridge design Design of Highway Bridges is the one-stop, ready reference that puts information at your fingertips, while also serving as an excellent study guide and reference for the U.S. Professional Engineering Examination.
Download or read book Analytical Methods in Petroleum Upstream Applications written by Cesar Ovalles and published by CRC Press. This book was released on 2015-04-02 with total page 1351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective measurement of the composition and properties of petroleum is essential for its exploration, production, and refining; however, new technologies and methodologies are not adequately documented in much of the current literature. Analytical Methods in Petroleum Upstream Applications explores advances in the analytical methods and instrumentation that allow more accurate determination of the components, classes of compounds, properties, and features of petroleum and its fractions. Recognized experts explore a host of topics, including: A petroleum molecular composition continuity model as a context for other analytical measurements A modern modular sampling system for use in the lab or the process area to collect and control samples for subsequent analysis The importance of oil-in-water measurements and monitoring The chemical and physical properties of heavy oils, their fractions, and products from their upgrading Analytical measurements using gas chromatography and nuclear magnetic resonance (NMR) applications Asphaltene and heavy ends analysis Chemometrics and modeling approaches for understanding petroleum composition and properties to improve upstream, midstream, and downstream operations Due to the renaissance of gas and oil production in North America, interest has grown in analytical methods for a wide range of applications. The understanding provided in this text is designed to help chemists, geologists, and chemical and petroleum engineers make more accurate estimates of the crude value to specific refinery configurations, providing insight into optimum development and extraction schemes.
Download or read book Design of Pile Foundations written by Aleksandar Sedmak Vesić and published by Transportation Research Board. This book was released on 1977-01-01 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pile Design and Construction Practice written by Willis H. Thomas and published by CRC Press. This book was released on 2007-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group
Download or read book Design of Pile Foundations written by US Army Corps of Engineers and published by . This book was released on 2005-01-01 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides information, foundation exploration and testing procedures, load test methods, analysis techniques, allowable criteria, design procedures, and construction consideration for the selection, design, and installation of pile foundations. The guidance is based on the present state of the technology for pile-soil-structure-foundation interaction behavior. This manual provides design guidance intended specifically for the geotechnical and structural engineer but also provides essential information for others interested in pile foundations such as the construction engineer in understanding construction techniques related to pile behavior during installation. Since the understanding of the physical causes of pile foundation behavior is actively expanding by better definition through ongoing research, prototype, model pile, and pile group testing and development of more refined analytical models, this manual is intended to provide examples and procedures of what has been proven successful. This is not the last nor final word on the state of the art for this technology. We expect, as further practical design and installation procedures are developed from the expansion of this technology, that these updates will be issued as changes to this manual.
