Download or read book Load and Resistance Factor Design LRFD for Deep Foundations written by Samuel G. Paikowsky and published by Transportation Research Board. This book was released on 2004 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction and research approach -- Findings -- Interpretation, appraisal, and applications -- Conclusions and suggested research -- Bibliography -- Appendixes.

Download or read book NCHRP Report 507 written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pile Foundations in Engineering Practice written by Shamsher Prakash and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise, systematic and complete treatment of the design and construction of pile foundations. Discusses pile behavior under various loadings and types of piles and their installation, including consideration of soil parameters. It provides step-by-step design procedures for piles subject to vertical loading and pullout, lateral, inclined and eccentric loads, or dynamic loads, and for piles in permafrost. Also describes load test procedures and their interpretation and buckling of long, slender piles with and without supported length. The closing chapter presents case histories of prediction and performance of piles and pile groups. Includes numerous solved problems.

Download or read book Calibration of Resistance Factors Needed in the LRFD Design of Driven Piles written by Murad Yusuf Abu-Farsakh and published by . This book was released on 2009 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Related Development and Implementation of Load and Resistance Factor Design LRFD Methods written by George G. Goble and published by Transportation Research Board. This book was released on 1999 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis report will be of interest to geotechnical, structural, and bridge engineers, especially those involved in the development and implementation of the geotechnical aspects of the AASHTO Bridge Code. The synthesis documents a review of geotechnical related LRFD specifications and their development worldwide to compare them with the current AASHTO LRFD Bridge Code. Design procedures for foundations, earth retaining structures, and culverts are summarized and compared with the methods specified by the AASHTO code. This TRB report provides information designed to assist engineers in implementing the geotechnical features of LRFD methods. Information for the synthesis was collected by surveying U.S. and Canadian transportation agencies and by conducting a literature search using domestic and international sources. Interviews were also conducted with selected international experts. The limited available experience in the United States and information from international practice are discussed to understand the problems that have arisen in order that solutions may be found. Based on the studies reported here, suggestions for improving the code are identified.

Download or read book Application of Stress Wave Theory to Piles Quality Assurance on Land and Offshore Piling written by J. Beim and published by CRC Press. This book was released on 2000-01-01 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work collates the topics discussed in the sixth International Conference on land and offshore piling. It covers topics such as: wave mechanics and its application to pile mechanics; driving equipment and developments; and pile integrity and low strain dynamic testing.

Download or read book New Generation Design Codes For Geotechnical Engineering Practice Taipei 2006 With Cd rom Proceedings Of The International Symposium written by Meei-ling Lin and published by World Scientific. This book was released on 2006-10-25 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Communication of design risk within a transparent and rational framework is necessary in view of the increasing interest in code harmonization, public involvement in defining acceptable risk levels, and risk-sharing among client, consultant, insurer, and financier. Activities in code harmonization are particularly noteworthy. For the geotechnical engineering profession, there is added pressure for it to undergo a significant revamp because structural and geotechnical design are increasingly incompatible. The contributions in this volume tackle the important issues relating to new generation geotechnical design codes, in a bid to move geotechnical engineers forward together with the significant changes occurring at the global level.

Download or read book Geotechnical Risk and Safety written by Yusuke Honjo and published by CRC Press. This book was released on 2009-06-01 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Communication of risks within a transparent and accountable framework is essential in view of increasing mobility and the complexity of the modern society and the field of geotechnical engineering does not form an exception. As a result, modern risk assessment and management are required in all aspects of geotechnical issues, such as planning, design, construction of geotechnical structures, mitigation of geo-hazards, management of large construction projects, maintenance of structures and life-cycle cost evaluation. This volume discusses: 1. Evaluation and control of uncertainties through investigation, design and construction of geotechnical structures; 2. Performance-based specifications, reliability based design and limit state design of geotechnical structures, and design code developments; 3. Risk assessment and management of geo-hazards, such as landslides, earthquakes, debris flow, etc.; 4. Risk management issues concerning large geotechnical construction projects; 5. Repair and maintenance strategies of geotechnical structures. Intended for researchers and practitioners in geotechnical, geological, infrastructure and construction engineering.

Download or read book Proceedings of the International Workshop on Limit State Design in Geotechnical Engineering Practice written by Robert Bruce Gilbert and published by World Scientific. This book was released on 2003 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication contains the abstracts of 20 papers, the majority of which were presented at the International Workshop on Limit State Design in Geotechnical Engineering Practice (LSD2003). The complete contributions are available in the accompanying CD-ROM (special lecture not included). The topics covered include: performance-based and limit state design philosophies; issues arising from the implementation of limit state design codes; elaborations of OC measured valuesOCO, OC derived valuesOCO and OC characteristic valuesOCO; reliability-based methodologies for analytical calibration of partial factors; and application of partial factors in FEM where highly nonlinear force-deformation behaviors may govern."

Download or read book Frontiers in Offshore Geotechnics III written by Vaughan Meyer and published by CRC Press. This book was released on 2015-05-15 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Offshore Geotechnics III comprises the contributions presented at the Third International Symposium on Frontiers in Offshore Geotechnics (ISFOG, Oslo, Norway, 10-12 June 2015), organised by the Norwegian Geotechnical Institute (NGI). The papers address current and emerging geotechnical engineering challenges facing those working in off

Download or read book Reliability Based Design in Geotechnical Engineering written by Kok-Kwang Phoon and published by CRC Press. This book was released on 2008-04-21 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability-based design is the only engineering methodology currently available which can ensure self-consistency in both physical and probabilistic terms. It is also uniquely compatible with the theoretical basis underlying other disciplines such as structural design. It is especially relevant as geotechnical design becomes subject to incre

Download or read book A Short Course in Soil Structure Engineering of Deep Foundations Excavations and Tunnels written by Charles Ng and published by Thomas Telford. This book was released on 2004-09-26 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD includes student editions of the OASYS software packages 'FREW' and 'Safe'.

Download or read book Developing Production Pile Driving Criteria from Test Pile Data written by Dan A. Brown and published by Transportation Research Board. This book was released on 2011 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB’s National Cooperative Highway Research Program (NCHRP) Synthesis 418: Developing Production Pile Driving Criteria from Test Pile Data provides information on the current practices used by state transportation agencies to develop pile driving criteria, with special attention paid to the use of test pile data in the process.

Download or read book Foundation Design Codes and Soil Investigation in View of International Harmonization and Performance Based Design written by Y. Honjo and published by CRC Press. This book was released on 2002-01-01 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions contained in these proceedings are divided into three main sections: theme lectures presented during the pre-workshop lecture series; keynote lectures and other contributed papers; and a translation of the Japanese geotechnical design code.

Download or read book Improving Agreement Between Static Method and Dynamic Formula for Driven Cast in place Piles in Wisconsin written by James H. Long and published by . This book was released on 2013 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Foundation Engineering Handbook written by Manjriker Gunaratne and published by CRC Press. This book was released on 2006-01-13 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Great strides have been made in the art of foundation design during the last two decades. In situ testing, site improvement techniques, the use of geogrids in the design of retaining walls, modified ACI codes, and ground deformation modeling using finite elements are but a few of the developments that have significantly advanced foundation engineering in recent years. What has been lacking, however, is a comprehensive reference for foundation engineers that incorporates these state-of-the-art concepts and techniques. The Foundation Engineering Handbook fills that void. It presents both classical and state-of-the-art design and analysis techniques for earthen structures, and covers basic soil mechanics and soil and groundwater modeling concepts along with the latest research results. It addresses isolated and shallow footings, retaining structures, and modern methods of pile construction monitoring, as well as stability analysis and ground improvement methods. The handbook also covers reliability-based design and LRFD (Load Resistance Factor Design)-concepts not addressed in most foundation engineering texts. Easy-to-follow numerical design examples illustrate each technique. Along with its unique, comprehensive coverage, the clear, concise discussions and logical organization of The Foundation Engineering Handbook make it the one quick reference every practitioner and student in the field needs.

Download or read book Hydro Environmental Analysis written by James L. Martin and published by CRC Press. This book was released on 2013-12-04 with total page 5742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on fundamental principles, Hydro-Environmental Analysis: Freshwater Environments presents in-depth information about freshwater environments and how they are influenced by regulation. It provides a holistic approach, exploring the factors that impact water quality and quantity, and the regulations, policy and management methods that are necessary to maintain this vital resource. It offers a historical viewpoint as well as an overview and foundation of the physical, chemical, and biological characteristics affecting the management of freshwater environments. The book concentrates on broad and general concepts, providing an interdisciplinary foundation. The author covers the methods of measurement and classification; chemical, physical, and biological characteristics; indicators of ecological health; and management and restoration. He also considers common indicators of environmental health; characteristics and operations of regulatory control structures; applicable laws and regulations; and restoration methods. The text delves into rivers and streams in the first half and lakes and reservoirs in the second half. Each section centers on the characteristics of those systems and methods of classification, and then moves on to discuss the physical, chemical, and biological characteristics of each. In the section on lakes and reservoirs, it examines the characteristics and operations of regulatory structures, and presents the methods commonly used to assess the environmental health or integrity of these water bodies. It also introduces considerations for restoration, and presents two unique aquatic environments: wetlands and reservoir tailwaters. Written from an engineering perspective, the book is an ideal introduction to the aquatic and limnological sciences for students of environmental science, as well as students of environmental engineering. It also serves as a reference for engineers and scientists involved in the management, regulation, or restoration of freshwater environments.