Download or read book LLDPE Production via Solution Process Cost Analysis LLDPE E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-07 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-octene using a solution process. The process under analysis is similar to NOVA Chemicals SCLAIRTECH process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): EP Patent 0527144, issued to DuPont in 1996 Keywords: Ethene, DuPont Canada, Cyclohexane, Stirred-Reactor, Swing Technology, Multi-Reactor
Download or read book LLDPE Production via Solution Process Cost Analysis LLDPE E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-octene using a solution process. The process under analysis is similar to NOVA Chemicals SCLAIRTECH process. This report was developed based essentially on the following reference(s): EP Patent 0527144, issued to DuPont in 1996 Keywords: Ethene, DuPont Canada, Cyclohexane, Stirred-Reactor, Swing Technology, Multi-Reactor
Download or read book Linear Alpha Olefins from Ethylene Cost Analysis LAO E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Alpha Olefins (LAO) production from ethylene. The process examined is similar to Shell Higher Olefins Process (SHOP). In this process, ethylene is oligomerized to produce Linear Alpha Olefins ranging from C4 to C20. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Olefins, Higher", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: Ethene, Ethylene Oligomerization, Internal Olefins
Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.
Download or read book Advances in Lightweight Materials and Structures written by A. Praveen Kumar and published by Springer Nature. This book was released on 2020-10-13 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advanced Lightweight Materials and Structures (ICALMS) 2020, and discusses the triad of processing, structure, and various properties of lightweight materials. It provides a well-balanced insight into materials science and mechanics of both synthetic and natural composites. The book includes topics such as nano composites for lightweight structures, impact and failure of structures, biomechanics and biomedical engineering, nanotechnology and micro-engineering, tool design and manufacture for producing lightweight components, joining techniques for lightweight structures for similar and dissimilar materials, design for manufacturing, reliability and safety, robotics, automation and control, fatigue and fracture mechanics, and friction stir welding in lightweight sandwich structures. The book also discusses latest research in composite materials and their applications in the field of aerospace, construction, wind energy, automotive, electronics and so on. Given the range of topics covered, this book can be a useful resource for beginners, researchers and professionals interested in the wide ranging applications of lightweight structures.
Download or read book Carbon Fibers written by Soo-Jin Park and published by Springer. This book was released on 2014-10-08 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains eight chapters that discuss the manufacturing methods, surface treatment, composite interfaces, microstructure-property relationships with underlying fundamental physical and mechanical principles, and applications of carbon fibers and their composites. Recently, carbon-based materials have received much attention for their many potential applications. The carbon fibers are very strong, stiff, and lightweight, enabling the carbon materials to deliver improved performance in several applications such as aerospace, sports, automotive, wind energy, oil and gas, infrastructure, defense, and semiconductors. However, the use of carbon fibers in cost-sensitive, high-volume industrial applications is limited because of their relatively high costs. However, its production is expected to increase because of its widespread use in high-volume industrial applications; therefore, the methods used for manufacturing carbon fibers and carbon-fiber-reinforced composites and their structures and characteristics need to be investigated.
Download or read book Dielectric Polymer Nanocomposites written by J. Keith Nelson and published by Springer Science & Business Media. This book was released on 2009-12-17 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectric Polymer Nanocomposites provides the first in-depth discussion of nano-dielectrics, an emerging and fast moving topic in electrical insulation. The text begins with an overview of the background, principles and promise of nanodielectrics, followed by a discussion of the processing of nanocomposites and then proceeds with special considerations of clay based processes, mechanical, thermal and electric properties and surface properties as well as erosion resistance. Carbon nanotubes are discussed as a means of creation of non linear conductivity, the text concludes with a industrial applications perspective.
Download or read book Advanced Polymeric Materials written by Gabriel O. Shonaike and published by CRC Press. This book was released on 2003-04-14 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from experts at some of the world's leading academic and industrial institutions, Advanced Polymeric Materials: Structure Property Relationships brings into book form a wealth of information previously available primarily only within computer programs. In a welcome narrative treatment, it provides comprehensive coverage of p
Download or read book Electric Cables Handbook written by BICC Cables Ltd and published by Wiley-Blackwell. This book was released on 1997-12-08 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Cables Handbook provides a comprehensive and substantial coverage of all types of energy cables--from wiring and flexible cables for general use, to distribution, transmission and submarine cables. It includes information on materials, design principles, installation, operating experience and standards, and several appendices contain extensive data tables on commonly used cable types and their properties. Electric Cables Handbook is an extensive source of up-to-date and essential information for electrical engineers, contractors, supply authorities and cable manufacturers.
Download or read book Additives for Polyolefins written by Michael Tolinski and published by William Andrew. This book was released on 2009-09-22 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasizes the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. With major sections for each additive function, this book provides a highly practical guide for engineers and scientists creating and using polyolefin compounds, who will find in this book a wealth of detail and practical guidance. This unique resource will enable them to make practical decisions about the use of the various additives, fillers, and reinforcements specific to this family of materials. ABOUT THE AUTHOR Michael Tolinski is a freelance writer and a lecturer at the University of Michigan's College of Engineering. He is a frequent contributor to Plastics Engineering and Manufacturing Engineering. Structured to make it easy for the reader to find solutions for specific property requirements Contains a number of short case studies about companies that have used or developed a particular additive to achieve a desired result Covers environmental resistance, mechanical property enhancement, appearance enhancement, processing aids, and other modifications of form and function
Download or read book Transients in Electrical Systems Analysis Recognition and Mitigation written by J. C. Das and published by McGraw Hill Professional. This book was released on 2010-05-06 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detect and Mitigate Transients in Electrical Systems This practical guide explains how to identify the origin of disturbances in electrical systems and analyze them for effective mitigation and control. Transients in Electrical Systems considers all transient frequencies, ranging from 0.1 Hz to 50 MHz, and discusses transmission line and cable modeling as well as frequency dependent behavior. Results of EMTP simulations, solved examples, and detailed equations are included in this comprehensive resource. Transients in Electrical Systems covers: Transients in lumped circuits Control systems Lightning strokes, shielding, and backflashovers Transients of shunt capacitor banks Switching transients and temporary overvoltages Current interruption in AC circuits Symmetrical and unsymmetrical short-circuit currents Transient behavior of synchronous generators, induction and synchronous motors, and transformers Power electronic equipment Flicker, bus, transfer, and torsional vibrations Insulation coordination Gas insulated substations Transients in low-voltage and grounding systems Surge arresters DC systems, short-circuits, distributions, and HVDC Smart grids and wind power generation
Download or read book Progress in Food Preservation written by Rajeev Bhat and published by John Wiley & Sons. This book was released on 2012-03-05 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a wide range of new approaches aimed at improving the safety and quality of food products and agricultural commodities. Each chapter provides in-depth information on new and emerging food preservation techniques including those relating to decontamination, drying and dehydration, packaging innovations and the use of botanicals as natural preservatives for fresh animal and plant products. The 28 chapters, contributed by an international team of experienced researchers, are presented in five sections, covering: Novel decontamination techniques Novel preservation techniques Active and atmospheric packaging Food packaging Mathematical modelling of food preservation processes Natural preservatives This title will be of great interest to food scientists and engineers based in food manufacturing and in research establishments. It will also be useful to advanced students of food science and technology.
Download or read book The Effect of Sterilization on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2018-02-22 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Effect of Sterilization Methods on Plastics and Elastomers, Fourth Edition brings together a wide range of essential data on the sterilization of plastics and elastomers, thus enabling engineers to make optimal material choices and design decisions. The data tables in this book enable engineers and scientists to select the right materials and sterilization method for a given product or application. The book is a unique and essential reference for anybody working with plastic materials that are likely to be exposed to sterilization methods, be it in medical device or packaging development, food packaging or other applications. Presents essential data and practical guidance for engineers and scientists working with plastics in applications that require sterile packaging and equipment Updated edition removes obsolete data, updates manufacturers, verifies data accuracy, and adds new plastics materials for comparison Provides essential information and guidance for FDA submissions required for new medical devices
Download or read book Carbon based Polymer Nanocomposites for Environmental and Energy Applications written by Ahmad Fauzi Ismail and published by Elsevier. This book was released on 2018-03-28 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Polymer Nanocomposites for Environmental and Energy Applications provides the fundamental physico-chemical characterizations of recently explored carbon-based polymer nanocomposites, such as carbon nanotubes, graphene and its derivatives, nanodiamond, fullerenes and other nano-sized carbon allotropes. The book also covers the applications of carbon-based polymer nanocomposite in the environmental and energy fields. Topics range from the various approaches that have been explored and developed for the fabrication of carbon-based polymer nanocomposite, to their applications in tackling environmental and energy related issues. Provides a clear picture of the current state-of-the-art and future trends in carbon-based polymer nanomaterials Explains the interactions between nanofiller-polymer matrices and mechanisms related to applications in environmental pollution and energy shortage Includes computational and experimental studies of the physical and chemical properties of carbon-based polymer nanocomposites Features chapters written by world leading experts
Download or read book Use of Recycled Plastics in Eco efficient Concrete written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2018-11-21 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use of Recycled Plastics in Eco-efficient Concrete looks at the processing of plastic waste, including techniques for separation, the production of plastic aggregates, the production of concrete with recycled plastic as an aggregate or binder, the fresh properties of concrete with plastic aggregates, the shrinkage of concrete with plastic aggregates, the mechanical properties of concrete with plastic aggregates, toughness of concrete with plastic aggregates, modulus of elasticity of concrete with plastic aggregates, durability of concrete with plastic aggregates, concrete plastic waste powder with enhanced neutron radiation shielding, and more, thus making it a valuable reference for academics and industrial researchers. Describes the main types of recycled plastics that can be applied in concrete manufacturing Presents, for the first time, state-of-the art knowledge on the properties of conventional concrete with recycled plastics Discusses the technological challenges for concrete manufactures for mass production of recycled concrete from plastic waste
Download or read book Polymer Science and Technology written by Robert O. Ebewele and published by CRC Press. This book was released on 2000-03-23 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your search for the perfect polymers textbook ends here - with Polymer Science and Technology. By incorporating an innovative approach and consolidating in one volume the fundamentals currently covered piecemeal in several books, this efficient text simplifies the learning of polymer science. The book is divided into three main sections: po
Download or read book Models for Thermodynamic and Phase Equilibria Calculations written by Stanley I. Sandler and published by CRC Press. This book was released on 1993-10-07 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a definitive state-of-the-art review of the models used in applied thermodynamics. Dis-cusses all aspects of thermodynamic modeling relevant to the chemical industry-including activ4 coefficient models, equations of state, mixture group contribution methods, and specialized procedures for polymer and ele tr@01 e solutions.