Download or read book Living controlled Radical Polymerization in a Continuous Tubular Reactor written by Thomas Edward Enright and published by . This book was released on 2010 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant advances have been made in the understanding of living/controlled radical polymerization processes since their discovery in the early 1990's. These processes enable an unprecedented degree of control over polymer architecture that was previously not possible using conventional radical polymerization processes, and this has made possible the synthesis of many new and interesting materials. However, there has been only limited success in commercializing these new methods. Recently there has been increased focus on the development of more industrially viable processes. Dispersed aqueous phase reactions have received much attention because these water-based processes have several technical, economic, and environmental benefits over the more common solution and bulk reactions that were originally developed. Likewise, there has been some investigation of using continuous reactors that have potential technical and economic benefits over the more commonly employed batch reactors. This thesis presents an in-depth study that combines the three aforementioned technologies: living/controlled radical polymerization, dispersed phase aqueous reactions, and continuous reactors. Specifically, the system of interest is a nitroxide-mediated miniemulsion polymerization reaction in a continuous tubular reactor to produce polymer latex. Design of the continuous tubular reactor is discussed in some detail with a focus on specific technical challenges that were faced in building a functional apparatus for this system. Scoping experiments are described which identified a significant effect of temperature ramping rate that is critical to understand when moving to larger scale reactors for this system. The unexpected phenomenon of room temperature polymerization initiated by ascorbic acid is also described. There is demonstration for the first time that bulk and miniemulsion polymers can be produced in a tubular reactor under controlled nitroxide-mediated polymerization conditions, and copolymers can be produced. A detailed residence time distribution study for the tubular reactor is also shown, and several interesting phenomena are discussed that have implications on the practical operating conditions of the tubular reactor. This particular study makes it clear that one should experimentally verify the residence time distribution within a continuous system with the reactants of interest, and that model systems may not give an accurate picture of the real system.
Download or read book Free Radical Polymerization in a Continuous Filled Tubular Reactor with Multifunctional Initiators written by Won Jung Yoon and published by . This book was released on 1992 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control of Polymerization Reactors written by Joseph Schork and published by Routledge. This book was released on 2017-09-20 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference and text provides an in-depth description of developments in control techniques and their application to polymerization reactors and offers important introductory background information on polymerization reaction engineering.;Discussing modelling, identification, linear, nonlinear and multivariable schemes, Control of Polymerization Reactors: presents all available techniques that can be used to control reactors properly for optimal performance; shows how to manipulate pivotal variables that affect reactor control; examines methods for deriving dynamic process models to improve reactor efficiency; reviews reactor control problems and points out end-use properties; supplies methods for measuring process variables, and ways to estimate variables that can't be measured; and explains how single-input, single-output (SISO) strategies can be effectively used for control.;Filled with illustrative examples to clarify concepts, including more than 730 figures, tables and equations, Control of Polymerization Reactors is intended for use as a reference for chemical, process development, process design, research and development, control systems, and polymer engineers; and polymer chemists and physicists; as well as a text for upper-level undergraduate and graduate students in polymerization reactor control courses.
Download or read book Advances in Controlled living Radical Polymerization written by Krzysztof Matyjaszewski and published by . This book was released on 2003 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Controlled/Living Radical Polymerization presents new developments in controlled/living radical polymerization in three areas: atom transfer radical polymerization (ATRP), nitroxide mediated polymerization (NMP), and reversible addition-fragmentation transfer (RAFT). This book also includes synthesis and characterization of many new materials.
Download or read book Atom Transfer Radical Polymerization with Low Catalyst Concentration in Continuous Processes written by Nicky C. F. Chan and published by . This book was released on 2012 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atom transfer radical polymerization (ATRP) is a dynamic technique that possesses tremendous potential for the synthesis of novel polymeric materials not possible through conventional free radical polymerization. However, its use on an industrial scale has been limited by the high level of transition metal complex required. Significant advances have been made in the last 5 years towards lowering the level of copper complexes used in ATRP, resulting in novel variants called "activator regenerated by electron transfer" (ARGET) and "single electron transfer-living radical polymerization" (SET-LRP). To fully realize the potential of ATRP, its use in industrially relevant processes must be studied. Continuous processes such as tubular flow reactors and stirred tank reactors (CSTR) can reduce waste, improve productivity and facilitate process scale-up when compared to common batch reactors. The combination of low copper concentration ATRP techniques and continuous processes are especially attractive towards the design of a commercially viable process. This thesis presents a study into ARGET ATRP and SET-LRP as applied to continuous tubular and stirred tank reactors for the production of acrylic and methacrylic polymers. The equilibrium which governs polymerization rate and control over molecular architecture is studied through batch ARGET ATRP experiments. The improved understanding of ARGET ATRP enabled the reduction of ligand from a 3 to 10 fold excess used previously down to a stoichiometric ratio to copper salts. ARGET ATRP was then adapted to a continuous tubular reactor, as well as to a semi-automated CSTR. The design of the reactors and the effect of reaction conditions such as reducing agent concentration and residence time are discussed. The use of common elemental copper(0) such as copper wire and copper tubing is also investigated with SET-LRP for room temperature polymerization of methyl acrylate. SET-LRP is adapted to a CSTR to observe the effects of residence time on reaction rate, molecular weight control as well as copper consumption rate. The use of copper tubing as a catalyst source for SET-LRP is demonstrated and the design of a continuous tubular reactor using a combination of copper and stainless steel tubing is discussed.
Download or read book Controlled Polymerization and Polymeric Structures written by Akihiro Abe and published by Springer. This book was released on 2014-07-08 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.
Download or read book Fundamentals of Controlled Living Radical Polymerization written by Nicolay V Tsarevsky and published by Royal Society of Chemistry. This book was released on 2013-04-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlled/living radical polymerization (CRP) has revolutionized and revitalized the field of synthetic polymer chemistry over the last twenty years as it is now possible to prepare a wide variety of previously inaccessible macromolecules under relatively mild conditions. Fundamentals of Controlled/Living Radical Polymerization provides an in-depth coverage of the essential chemical principles that enable and govern each of the CRP methods. The book starts with a brief historical overview of the major findings in polymer science which eventually led to the development of living ionic and living radical systems. It then goes on to introduce the main CRP techniques including their mechanistic understanding. The book also provides the information needed to select the appropriate reagents and conditions to conduct various CRP methods in a practical setting. Therefore, in addition to a newcomer gaining an appreciation for what has already been accomplished, the reader will be armed with the tools needed to begin independent research. Fundamentals of Controlled/Living Radical Polymerization provides essential insight into a rapidly growing field that goes beyond a simple literature review of the area. Written by leading experts in the field, the book is an indispensible resource for all researchers, instructors, and students in polymer chemistry.
Download or read book Handbook of Vinyl Polymers written by Munmaya Mishra and published by CRC Press. This book was released on 2016-04-19 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radical polymerization is one of the most widely used means of producing vinyl polymers, supporting a myriad of commercial uses. Maintaining the quality of the critically acclaimed first edition, the Handbook of Vinyl Polymers: Radical Polymerization, Process, and Technology, Second Edition provides a fully updated, single-volume source on t
Download or read book Mathematical Modeling of Bulk and Solution Free Radical Polymerization in Tubular Reactors written by Carl John Stevens and published by . This book was released on 1988 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Controlled living Radical Polymerization written by Krzysztof Matyjaszewski and published by . This book was released on 2000 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines recent progress in controlled/living radical polymerization. The volume focuses on three synthetic methods: atom transfer radical polymerization, nitroxide mediated polymerization and degenerative transfer via addition fragmentation. In addition, the volume covers the preparation and characterization of many never before seen materials using ATRP, NMP and RAFT.
Download or read book Controlled living Radical Polymerization written by Krzysztof Matyjaszewski and published by Academic. This book was released on 2009 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent progress in the field of controlled/living radical polymerization.
Download or read book Continuous Polymerization of Styrene in a Tubular Reactor written by David William Foster and published by . This book was released on 1973 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow Chemistry Applications written by Ferenc Darvas and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-10-25 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fully up-dated edition of the two-volume work covers both the theoretical foundation as well as the practical aspects. A strong insight in driving a chemical reaction is crucial for a deeper understanding of new potential technologies. New procedures for warranty of safety and green principles are discussed. Vol. 1: Fundamentals.
Download or read book Controlled Radical Polymerization written by Krzysztof Matyjaszewski and published by . This book was released on 1998 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent work in polymer chemistry has allowed scientists to control the polymerization reaction and produce increasingly well-defined polymers. This volume examines current work in the field and describes the synthesis of new materials. It includes discussions of nitroxide-mediated and metal-mediated radical polymerizations. It also includes an overview of the fundamentals of radical chemistry, making it accessible to a wide range of chemists and materials scientists.
Download or read book RAFT Polymerization 2 Volume Set written by Graeme Moad and published by John Wiley & Sons. This book was released on 2022-03-14 with total page 1283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore this one-stop resource for reversible addition-fragmentation chain transfer polymerization from a leading voice in chemistry RAFT Polymerization: Methods, Synthesis and Applications delivers a comprehensive and insightful analysis of reversible addition-fragmentation chain transfer polymerization (RAFT) and its applications to fields as diverse as material science, industrial chemistry, and medicine. This one-stop resource offers readers a detailed synopsis of the current state of RAFT polymerization. This text will inspire further research and continue the drive to an ever-increasing range of applications by synthesizing and explaining the more central existing literature on RAFT polymerization. It contains a beginner’s guide on how to do a RAFT polymerization before moving on to much more advanced techniques and concepts, like the kinetics and mechanisms of the RAFT process. The distinguished editors have also included resources covering the four major classes of RAFT agents and recent developments in processes for initiating RAFT polymerization. Readers will also benefit from the inclusion of: A thorough introduction to the mechanisms, theory, and mathematical modeling of RAFT Explorations of RAFT agent design and synthesis, dithioesters, dithiobenzoates, trithiocarbonates, xanthates, dithiocarbamates, macromonomer RAFT, and RAFT copolymerization Discussions of a variety of RAFT architectures, including multiblocks, combs, hyperbranched polymers, and stars Treatments of end group transformation, cationic RAFT, high-throughput RAFT, and RAFT in continuous flow An examination of sequence defined polymers by RAFT Perfect for organic chemists, polymer chemists, and materials scientists, RAFT Polymerization: Methods, Synthesis and Applications will also earn a place in the libraries of chemical engineers seeking a one-stop reference for this method of controlled radical polymerization with a wide range of applications in multiple areas.
Download or read book Continuous Polymerization Reactors written by American Institute of Chemical Engineers and published by . This book was released on 1976 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radical Polymerization Kinetics and Mechanism written by and published by Cuvillier Verlag. This book was released on 2006-08-22 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
