Download or read book Life Cycle Assessment Issues for the Automotive Plastics Industry written by Brett C. Smith and Michael S. Flynn and published by . This book was released on 1993 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Life Cycle Assessment and Environmental Impact of Polymeric Products written by T. J. O'Neill and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review describes the process of life cycle analysis in some detail. It describes the different organisations involved in researching and applying these techniques and the database resources being used to generate comparative reports. The overview explains the factors to be considered, the terminology, the organisations involved in developing these techniques and the legislation which is driving the whole process forward. The ISO standards relating to environmental management are also discussed briefly in the document. Design for the environment is covered in the report. This review is accompanied by summaries of selected papers on life cycle analysis and environmental impact from the Rapra Polymer Library database.
Download or read book Design and Manufacture of Textile Composites written by A C Long and published by CRC Press. This book was released on 2006-01-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textile composites encompass a rather narrow range of materials, based on three-dimensional reinforcements produced using specialist equipment. This book describes the design, manufacture and applications of textile composites. The intention is to describe the broad range of polymer composite materials with textile reinforcements, from woven and non-crimp commodity fabrics to 3-D textiles and their applications. The book gives particular attention to the modelling of textile structures, composites manufacturing methods, and subsequent component performance. This practical book is an invaluable guide for manufacturers of polymer composite components, end-users and designers, structural materials researchers, and textile manufacturers involved in the development of new products with textile composites.
Download or read book Life Cycle Management written by Guido Sonnemann and published by Springer. This book was released on 2015-07-16 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides insight into the Life Cycle Management (LCM) concept and the progress in its implementation. LCM is a management concept applied in industrial and service sectors to improve products and services, while enhancing the overall sustainability performance of business and its value chains. In this regard, LCM is an opportunity to differentiate through sustainability performance on the market place, working with all departments of a company such as research and development, procurement and marketing, and to enhance the collaboration with stakeholders along a company’s value chain. LCM is used beyond short-term business success and aims at long-term achievements by minimizing environmental and socio-economic burden, while maximizing economic and social value.
Download or read book Life Cycle Assessment LCA written by Allan Astrup Jensen and published by . This book was released on 1998 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life Cycle Assessment
Download or read book Automotive Plastic Chain Some Issues and Challenges written by Michael S. Flynn and Brett C. Smith and published by . This book was released on 1993 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials in Automotive Engineering written by Jason Rowe and published by Elsevier. This book was released on 2012-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is under constant pressure to design vehicles capable of meeting increasingly demanding challenges such as improved fuel economy, enhanced safety and effective emission control. Drawing on the knowledge of leading experts, Advanced materials in automotive engineering explores the development, potential and impact of using such materials.Beginning with a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications, Advanced materials in automotive engineering goes on to consider nanostructured steel for automotive body structures, aluminium sheet and high pressure die-cast aluminium alloys for automotive applications, magnesium alloys for lightweight powertrains and automotive bodies, and polymer and composite moulding technologies. The final chapters then consider a range of design and manufacturing issues that need to be addressed when working with advanced materials, including the design of advanced automotive body structures and closures, technologies for reducing noise, vibration and harshness, joining systems, and the recycling of automotive materials.With its distinguished editor and international team of contributors, Advanced materials in automotive engineering is an invaluable guide for all those involved in the engineering, design or analysis of motor vehicle bodies and components, as well as all students of automotive design and engineering. - Explores the development, potential and impact of using advanced materials for improved fuel economy, enhanced safety and effective mission control in the automotive industry - Provides a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications - Covers a range of design ideas and manufacturing issues that arise when working with advanced materials, including technologies for reducing noise, vibration and harshness, and the recycling of automotive materials
Download or read book Materials for Automobile Bodies written by Geoffrey Davies and published by Butterworth-Heinemann. This book was released on 2012-03-30 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 Introduction -- 2 Design and material utilization -- 3 Materials for consideration and use in automotive body structures -- 4 The role of demonstration, concept and competition cars -- 5 Component manufacture -- 6 Component assembly: materials joining technology -- 7 Corrosion and protection of the automotive structure -- 8 Environmental considerations -- 9 Future trends in automotive body materials.
Download or read book Life Cycle Assessment Handbook written by Mary Ann Curran and published by John Wiley & Sons. This book was released on 2012-10-08 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book of its kind, the Life Cycle Assessment Handbook: A Guide for Environmentally Sustainable Products will become an invaluable resource for environmentally progressive manufacturers and suppliers, product and process designers, executives and managers, and government officials who want to learn about this essential component of environmental sustainability. As the last several decades have seen a dramatic rise in the application of Life Cycle Assessment (LCA) in decision making, the interest in the life cycle concept as an environmental management and sustainability tool continues to grow. The LCA Handbook offers a look at the role that life cycle information, in the hands of companies, governments, and consumers, may have in improving the environmental performance of products and technologies. It concisely and clearly presents the various aspects of LCA in order to help the reader better understand the subject. The content of the book was designed with a certain flow in mind. After a high-level overview to describe current views and state-of-the-practice of LCA, it presents chapters that address specific LCA methodological issues including creating life cycle inventory, life cycle impact assessment, and capturing eco-systems services. These are followed by example applications of LCA in the agri-food industry; sustainable supply chain management; solid waste management; mining and mineral extraction; forest products; buildings; product innovation; and sustainable chemistry and engineering. The international success of the sustainability paradigm needs the participation of many stakeholders, including citizens, corporations, academia, and NGOs. The handbook links LCA and responsible decision making and how the life cycle concept is a critical element in environmental sustainability. It covers issues such as building capacity in developing countries and emerging economies so that they are more capable of harnessing the potential in LCA for sustainable development. Governments play a very important role with the leverage they have through procurement, regulation, international treaties, tax incentives, public outreach, and other policy tools. This compilation points to the clear trend for incorporating life cycle information into the design and development processes for products and policies, just as quality and safety concerns are now addressed throughout product design and development.
Download or read book Environmental Life Cycle Assessment of Goods and Services written by Chris T. Hendrickson and published by Routledge. This book was released on 2010-09-30 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental life cycle assessment is often thought of as cradle to grave and therefore as the most complete accounting of the environmental costs and benefits of a product or service. However, as anyone who has done an environmental life cycle assessment knows, existing tools have many problems: data is difficult to assemble and life cycle studies take months of effort. A truly comprehensive analysis is prohibitive, so analysts are often forced to simply ignore many facets of life cycle impacts. But the focus on one aspect of a product or service can result in misleading indications if that aspect is benign while other aspects pollute or are otherwise unsustainable. This book summarizes the EIO-LCA method, explains its use in relation to other life cycle assessment models, and provides sample applications and extensions of the model into novel areas. A final chapter explains the free, easy-to-use software tool available on a companion website. (www.eiolca.net) The software tool provides a wealth of data, summarizing the current U.S. economy in 500 sectors with information on energy and materials use, pollution and greenhouse gas discharges, and other attributes like associated occupational deaths and injuries. The joint project of twelve faculty members and over 20 students working together over the past ten years at the Green Design Institute of Carnegie Mellon University, the EIO-LCA has been applied to a wide range of products and services. It will prove useful for research, industry, and in economics, engineering, or interdisciplinary classes in green design.
Download or read book Annual Report written by United States. Federal Emergency Management Agency and published by . This book was released on 1983 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Life Cycle Assessment Open Access written by Olivier Jolliet and published by CRC Press. This book was released on 2015-11-18 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Life Cycle Assessment is a pivotal guide to identifying environmental problems and reducing related impacts for companies and organizations in need of life cycle assessment (LCA). LCA, a unique sustainability tool, provides a framework that addresses a growing demand for practical technological solutions. Detailing each phase of the LCA methodology, this textbook covers the historical development of LCA, presents the general principles and characteristics of LCA, and outlines the corresponding standards for good practice determined by the International Organization for Standardization. It also explains how to identify the critical aspects of an LCA, provides detailed examples of LCA analysis and applications, and includes illustrated problems and solutions with concrete examples from water management, electronics, packaging, automotive, and other industries. In addition, readers will learn how to: Use consistent criteria to realize and evaluate an LCA independently of individual interests Understand the LCA methodology and become familiar with existing databases and methods based on the latest results of international research Analyze and critique a completed LCA Apply LCA methodology to simple case studies Geared toward graduate and undergraduate students studying environmental science and industrial ecology, as well as practicing environmental engineers, and sustainability professionals who want to teach themselves LCA good practices, Environmental Life Cycle Assessment demonstrates how to conduct environmental assessments for products throughout their life cycles. It presents existing methods and recent developments in the growing field of LCA and systematically covers goal and system definition, life cycle inventory, life cycle impact assessment, and interpretation.
Download or read book High Performance and Specialty Fibers written by Japan The Society of Fiber Science and Techno and published by Springer. This book was released on 2016-08-16 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the key technologies and characteristics of the modern man-made specialty fibers mainly developed in Japan. Since the production of many low-cost man-made fibers shifted to China and other Asian countries, Japanese companies have focused on production of high-quality, high-performance super fibers as well as highly functionalized fibers so-called ‘Shin-gosen’. ZylonTM and DyneemaTM manufactured by Toyobo, TechnoraTM produced by Teijin, and VectranTM developed by Kuraray are those examples of super fibers. Carbon fibers ToraycaTM from Toray have occupied the most advanced high-performance application area. Various types of polyester fibers having design-shaped cross-sections and special fiber morphologies and those showing specific physico-chemical properties have also been developed to acquire a high-value textile market of the world. This book describes how these high-tech fibers have been developed and what aspects are the most important in each fiber based on its structure-property relationship. Famous specialists both in industry and academia are responsible for the contents, explaining the design concepts and the special technologies for the production of these special fibers. For university teachers and students, this volume is an excellent textbook that elucidates the basic concepts of modern fibers. At the same time, researchers, both in academia and industry, will find a comprehensive overview of recent man-made fibers. This publication, presenting the most easily understandable general survey of specialty man-made fibers to date, is dedicated to the 70th-anniversary of the Society of Fiber Science and Technology, Japan.
Download or read book Life Cycle Engineering of Plastics written by L. Lundquist and published by Elsevier. This book was released on 2001-01-23 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book adds much to the already evolving field of Design for Environment; but it goes far beyond most works on this subject by surrounding the central notions of life cycle assessment with a scientific body of knowledge and with a more practical slant reflecting the reality of the organizations in which product development occurs. Through a focus on plastic products, the authors show the importance of making ties between basic technical knowledge and the process of life cycle engineering. Their approach offers a practical, deliberate way to make ecologically and economically sensible decisions about product reuse and recycling and other critical dimensions of product life behavior. They demonstrate a positive approach to designing products that fits into a sustainable economy through down-to-earth cases. While the book focuses on the life cycle engineering of plastics, it is only a short step to other materials and products. Beyond contributing to the technology of life cycle engineering, this text adds to the growing body of knowledge that argues for an fundamentally new way of thinking about economic and social activity--a new paradigm for sustainable social and industrial problem solving. Industrial ecology is such a new system for thinking about and implementing sustainability that draws its core set of ideas from the ecological world. Industrial ecology brings to the surface the idea of interdependence among members of a community-- natural or economic, and notes the material cycles that are central to a stable ecosystem. The life cycle engineering framework, coupled with sound scientific knowledge of materials behavior as articulated in this book, makes a giant step towards bringing the model of industrial ecology into everyday practice." From the Preface by John R. Ehrenfeld Director, MIT Technology, Business and Environment Program Center for Technology, Policy, and Industrial Development
Download or read book LCA of an ecolabeled notebook consideration of social and environmental impacts along the entire life cycle written by Andreas Ciroth and published by Lulu.com. This book was released on 2011 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study investigates social and environmental impacts caused by an ecolabeled notebook along its entire life cycle. In order to analyse the divers effects of the laptop, a social life cycle assessment and an environmental life cycle assessment were performed in parallel. Both assessments together provide a holistic overview of positive and negative impacts in regard to social and environmental sustainability.This book contains the complete final report written by GreenDeltaTC on behalf of the Belgian Federal Public Planning Service Sustainable Development. It comprises the methodological background, the social inventory, process modifications with regard to the environmental inventory, and detailed results of the impact assessment phase. Further, a newly developed social impact assessment method is presented and applied. In addition, recommendations on company and policy level were derived.
Download or read book Plastic Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. - Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement - Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation - Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches
Download or read book Economic Issues in the Reuse of Automotive Plastics written by Daniel Kaplan and published by . This book was released on 1993 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
