Download or read book Lecture Notes on Mean Curvature Flow written by Carlo Mantegazza and published by Springer Science & Business Media. This book was released on 2011-07-28 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the subject of mean curvature flow of hypersurfaces with special emphasis on the analysis of singularities. This flow occurs in the description of the evolution of numerous physical models where the energy is given by the area of the interfaces. These notes provide a detailed discussion of the classical parametric approach (mainly developed by R. Hamilton and G. Huisken). They are well suited for a course at PhD/PostDoc level and can be useful for any researcher interested in a solid introduction to the technical issues of the field. All the proofs are carefully written, often simplified, and contain several comments. Moreover, the author revisited and organized a large amount of material scattered around in literature in the last 25 years.
Download or read book Lectures on Mean Curvature Flows written by Xi-Ping Zhu and published by American Mathematical Soc.. This book was released on 2002 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: ``Mean curvature flow'' is a term that is used to describe the evolution of a hypersurface whose normal velocity is given by the mean curvature. In the simplest case of a convex closed curve on the plane, the properties of the mean curvature flow are described by Gage-Hamilton's theorem. This theorem states that under the mean curvature flow, the curve collapses to a point, and if the flow is diluted so that the enclosed area equals $\pi$, the curve tends to the unit circle. In thisbook, the author gives a comprehensive account of fundamental results on singularities and the asymptotic behavior of mean curvature flows in higher dimensions. Among other topics, he considers in detail Huisken's theorem (a generalization of Gage-Hamilton's theorem to higher dimension), evolutionof non-convex curves and hypersurfaces, and the classification of singularities of the mean curvature flow. Because of the importance of the mean curvature flow and its numerous applications in differential geometry and partial differential equations, as well as in engineering, chemistry, and biology, this book can be useful to graduate students and researchers working in these areas. The book would also make a nice supplementary text for an advanced course in differential geometry.Prerequisites include basic differential geometry, partial differential equations, and related applications.
Download or read book Regularity Theory for Mean Curvature Flow written by Klaus Ecker and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Devoted to the motion of surfaces for which the normal velocity at every point is given by the mean curvature at that point; this geometric heat flow process is called mean curvature flow. * Mean curvature flow and related geometric evolution equations are important tools in mathematics and mathematical physics.
Download or read book Lecture Notes on Mean Curvature Flow Barriers and Singular Perturbations written by Giovanni Bellettini and published by Springer. This book was released on 2014-05-13 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the book is to study some aspects of geometric evolutions, such as mean curvature flow and anisotropic mean curvature flow of hypersurfaces. We analyze the origin of such flows and their geometric and variational nature. Some of the most important aspects of mean curvature flow are described, such as the comparison principle and its use in the definition of suitable weak solutions. The anisotropic evolutions, which can be considered as a generalization of mean curvature flow, are studied from the view point of Finsler geometry. Concerning singular perturbations, we discuss the convergence of the Allen–Cahn (or Ginsburg–Landau) type equations to (possibly anisotropic) mean curvature flow before the onset of singularities in the limit problem. We study such kinds of asymptotic problems also in the static case, showing convergence to prescribed curvature-type problems.
Download or read book Mean Curvature Flow written by Theodora Bourni and published by de Gruyter. This book was released on 2019-07-03 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions by leading experts in geometric analysis, this volume is documenting the material presented in the John H. Barrett Memorial Lectures held at the University of Tennessee, Knoxville, on May 29 - June 1, 2018. The central topic of the 2018 lectures was mean curvature flow, and the material in this volume covers all recent developments in this vibrant area that combines partial differential equations with differential geometry.
Download or read book Mean Curvature Flow written by Theodora Bourni and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-12-07 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions by leading experts in geometric analysis, this volume is documenting the material presented in the John H. Barrett Memorial Lectures held at the University of Tennessee, Knoxville, on May 29 - June 1, 2018. The central topic of the 2018 lectures was mean curvature flow, and the material in this volume covers all recent developments in this vibrant area that combines partial differential equations with differential geometry.
Download or read book The Ricci Flow An Introduction written by Bennett Chow and published by American Mathematical Soc.. This book was released on 2004 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ricci flow is a powerful technique that integrates geometry, topology, and analysis. Intuitively, the idea is to set up a PDE that evolves a metric according to its Ricci curvature. The resulting equation has much in common with the heat equation, which tends to 'flow' a given function to ever nicer functions. By analogy, the Ricci flow evolves an initial metric into improved metrics. Richard Hamilton began the systematic use of the Ricci flow in the early 1980s and applied it in particular to study 3-manifolds. Grisha Perelman has made recent breakthroughs aimed at completing Hamilton's program. The Ricci flow method is now central to our understanding of the geometry and topology of manifolds.This book is an introduction to that program and to its connection to Thurston's geometrization conjecture. The authors also provide a 'Guide for the hurried reader', to help readers wishing to develop, as efficiently as possible, a nontechnical appreciation of the Ricci flow program for 3-manifolds, i.e., the so-called 'fast track'. The book is suitable for geometers and others who are interested in the use of geometric analysis to study the structure of manifolds. "The Ricci Flow" was nominated for the 2005 Robert W. Hamilton Book Award, which is the highest honor of literary achievement given to published authors at the University of Texas at Austin.
Download or read book Lectures on the Ricci Flow written by Peter Topping and published by Cambridge University Press. This book was released on 2006-10-12 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to Ricci flow suitable for graduate students and research mathematicians.
Download or read book Global Differential Geometry written by Christian Bär and published by Springer Science & Business Media. This book was released on 2011-12-18 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of well-written surveys provided by experts in Global Differential Geometry to give an overview over recent developments in Riemannian Geometry, Geometric Analysis and Symplectic Geometry. The papers are written for graduate students and researchers with a general interest in geometry, who want to get acquainted with the current trends in these central fields of modern mathematics.
Download or read book Extrinsic Geometric Flows written by Bennett Chow and published by American Mathematical Soc.. This book was released on 2020-05-14 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extrinsic geometric flows are characterized by a submanifold evolving in an ambient space with velocity determined by its extrinsic curvature. The goal of this book is to give an extensive introduction to a few of the most prominent extrinsic flows, namely, the curve shortening flow, the mean curvature flow, the Gauß curvature flow, the inverse-mean curvature flow, and fully nonlinear flows of mean curvature and inverse-mean curvature type. The authors highlight techniques and behaviors that frequently arise in the study of these (and other) flows. To illustrate the broad applicability of the techniques developed, they also consider general classes of fully nonlinear curvature flows. The book is written at the level of a graduate student who has had a basic course in differential geometry and has some familiarity with partial differential equations. It is intended also to be useful as a reference for specialists. In general, the authors provide detailed proofs, although for some more specialized results they may only present the main ideas; in such cases, they provide references for complete proofs. A brief survey of additional topics, with extensive references, can be found in the notes and commentary at the end of each chapter.
Download or read book Hamilton s Ricci Flow written by Bennett Chow and published by American Mathematical Society, Science Press. This book was released on 2023-07-13 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ricci flow is a powerful analytic method for studying the geometry and topology of manifolds. This book is an introduction to Ricci flow for graduate students and mathematicians interested in working in the subject. To this end, the first chapter is a review of the relevant basics of Riemannian geometry. For the benefit of the student, the text includes a number of exercises of varying difficulty. The book also provides brief introductions to some general methods of geometric analysis and other geometric flows. Comparisons are made between the Ricci flow and the linear heat equation, mean curvature flow, and other geometric evolution equations whenever possible. Several topics of Hamilton's program are covered, such as short time existence, Harnack inequalities, Ricci solitons, Perelman's no local collapsing theorem, singularity analysis, and ancient solutions. A major direction in Ricci flow, via Hamilton's and Perelman's works, is the use of Ricci flow as an approach to solving the Poincaré conjecture and Thurston's geometrization conjecture.
Download or read book The Motion of a Surface by Its Mean Curvature MN 20 written by Kenneth A. Brakke and published by Princeton University Press. This book was released on 2015-03-08 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kenneth Brakke studies in general dimensions a dynamic system of surfaces of no inertial mass driven by the force of surface tension and opposed by a frictional force proportional to velocity. He formulates his study in terms of varifold surfaces and uses the methods of geometric measure theory to develop a mathematical description of the motion of a surface by its mean curvature. This mathematical description encompasses, among other subtleties, those of changing geometries and instantaneous mass losses. Originally published in 1978. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Elliptic Regularization and Partial Regularity for Motion by Mean Curvature written by Tom Ilmanen and published by American Mathematical Soc.. This book was released on 1994 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: We study Brakke's motion of varifolds by mean curvature in the special case that the initial surface is an integral cycle, giving a new existence proof by mean of elliptic regularization. Under a uniqueness hypothesis, we obtain a weakly continuous family of currents solving Brakke's motion. These currents remain within the corresponding level-set motion by mean curvature, as defined by Evans-Spruck and Chen-Giga-Goto. Now let [italic capital]T0 be the reduced boundary of a bounded set of finite perimeter in [italic capital]R[superscript italic]n. If the level-set motion of the support of [italic capital]T0 does not develop positive Lebesgue measure, then there corresponds a unique integral [italic]n-current [italic capital]T, [partial derivative/boundary/degree of a polynomial symbol][italic capital]T = [italic capital]T0, whose time-slices form a unit density Brakke motion. Using Brakke's regularity theorem, spt [italic capital]T is smooth [script capital]H[superscript italic]n-almost everywhere. In consequence, almost every level-set of the level-set flow is smooth [script capital]H[superscript italic]n-almost everywhere in space-time.
Download or read book Lectures on Symplectic Geometry written by Ana Cannas da Silva and published by Springer. This book was released on 2004-10-27 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of these notes is to provide a fast introduction to symplectic geometry for graduate students with some knowledge of differential geometry, de Rham theory and classical Lie groups. This text addresses symplectomorphisms, local forms, contact manifolds, compatible almost complex structures, Kaehler manifolds, hamiltonian mechanics, moment maps, symplectic reduction and symplectic toric manifolds. It contains guided problems, called homework, designed to complement the exposition or extend the reader's understanding. There are by now excellent references on symplectic geometry, a subset of which is in the bibliography of this book. However, the most efficient introduction to a subject is often a short elementary treatment, and these notes attempt to serve that purpose. This text provides a taste of areas of current research and will prepare the reader to explore recent papers and extensive books on symplectic geometry where the pace is much faster. For this reprint numerous corrections and clarifications have been made, and the layout has been improved.
Download or read book Contemporary Research in Elliptic PDEs and Related Topics written by Serena Dipierro and published by Springer. This book was released on 2019-07-12 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects contributions from the speakers at an INdAM Intensive period held at the University of Bari in 2017. The contributions cover several aspects of partial differential equations whose development in recent years has experienced major breakthroughs in terms of both theory and applications. The topics covered include nonlocal equations, elliptic equations and systems, fully nonlinear equations, nonlinear parabolic equations, overdetermined boundary value problems, maximum principles, geometric analysis, control theory, mean field games, and bio-mathematics. The authors are trailblazers in these topics and present their work in a way that is exhaustive and clearly accessible to PhD students and early career researcher. As such, the book offers an excellent introduction to a variety of fundamental topics of contemporary investigation and inspires novel and high-quality research.
Download or read book 2019 20 MATRIX Annals written by Jan de Gier and published by Springer Nature. This book was released on 2021-02-10 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATRIX is Australia’s international and residential mathematical research institute. It facilitates new collaborations and mathematical advances through intensive residential research programs, each 1-4 weeks in duration. This book is a scientific record of the ten programs held at MATRIX in 2019 and the two programs held in January 2020: · Topology of Manifolds: Interactions Between High and Low Dimensions · Australian-German Workshop on Differential Geometry in the Large · Aperiodic Order meets Number Theory · Ergodic Theory, Diophantine Approximation and Related Topics · Influencing Public Health Policy with Data-informed Mathematical Models of Infectious Diseases · International Workshop on Spatial Statistics · Mathematics of Physiological Rhythms · Conservation Laws, Interfaces and Mixing · Structural Graph Theory Downunder · Tropical Geometry and Mirror Symmetry · Early Career Researchers Workshop on Geometric Analysis and PDEs · Harmonic Analysis and Dispersive PDEs: Problems and Progress The articles are grouped into peer-reviewed contributions and other contributions. The peer-reviewed articles present original results or reviews on a topic related to the MATRIX program; the remaining contributions are predominantly lecture notes or short articles based on talks or activities at MATRIX.
Download or read book Extrinsic Geometric Flows written by Ben Andrews and published by American Mathematical Society. This book was released on 2022-03-02 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extrinsic geometric flows are characterized by a submanifold evolving in an ambient space with velocity determined by its extrinsic curvature. The goal of this book is to give an extensive introduction to a few of the most prominent extrinsic flows, namely, the curve shortening flow, the mean curvature flow, the Gauß curvature flow, the inverse-mean curvature flow, and fully nonlinear flows of mean curvature and inverse-mean curvature type. The authors highlight techniques and behaviors that frequently arise in the study of these (and other) flows. To illustrate the broad applicability of the techniques developed, they also consider general classes of fully nonlinear curvature flows. The book is written at the level of a graduate student who has had a basic course in differential geometry and has some familiarity with partial differential equations. It is intended also to be useful as a reference for specialists. In general, the authors provide detailed proofs, although for some more specialized results they may only present the main ideas; in such cases, they provide references for complete proofs. A brief survey of additional topics, with extensive references, can be found in the notes and commentary at the end of each chapter.