Download or read book Practical Finite Element Analysis written by Nitin S. Gokhale and published by FINITE TO INFINITE. This book was released on 2008 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights of the book: Discussion about all the fields of Computer Aided Engineering, Finite Element Analysis Sharing of worldwide experience by more than 10 working professionals Emphasis on Practical usuage and minimum mathematics Simple language, more than 1000 colour images International quality printing on specially imported paper Why this book has been written ... FEA is gaining popularity day by day & is a sought after dream career for mechanical engineers. Enthusiastic engineers and managers who want to refresh or update the knowledge on FEA are encountered with volume of published books. Often professionals realize that they are not in touch with theoretical concepts as being pre-requisite and find it too mathematical and Hi-Fi. Many a times these books just end up being decoration in their book shelves ... All the authors of this book are from IIT€™s & IISc and after joining the industry realized gap between university education and the practical FEA. Over the years they learned it via interaction with experts from international community, sharing experience with each other and hard route of trial & error method. The basic aim of this book is to share the knowledge & practices used in the industry with experienced and in particular beginners so as to reduce the learning curve & avoid reinvention of the cycle. Emphasis is on simple language, practical usage, minimum mathematics & no pre-requisites. All basic concepts of engineering are included as & where it is required. It is hoped that this book would be helpful to beginners, experienced users, managers, group leaders and as additional reading material for university courses.

Download or read book Lectures on Finite Element Methods in Continuum Mechanics written by John Tinsley Oden and published by . This book was released on 1973 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonlinear Continuum Mechanics for Finite Element Analysis written by Javier Bonet and published by Cambridge University Press. This book was released on 1997-09-28 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unified treatment of nonlinear continuum analysis and finite element techniques.

Download or read book Introduction to Finite Element Analysis and Design written by Nam-Ho Kim and published by John Wiley & Sons. This book was released on 2018-05-24 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the basic concepts of FEM in an easy-to-use format so that students and professionals can use the method efficiently and interpret results properly Finite element method (FEM) is a powerful tool for solving engineering problems both in solid structural mechanics and fluid mechanics. This book presents all of the theoretical aspects of FEM that students of engineering will need. It eliminates overlong math equations in favour of basic concepts, and reviews of the mathematics and mechanics of materials in order to illustrate the concepts of FEM. It introduces these concepts by including examples using six different commercial programs online. The all-new, second edition of Introduction to Finite Element Analysis and Design provides many more exercise problems than the first edition. It includes a significant amount of material in modelling issues by using several practical examples from engineering applications. The book features new coverage of buckling of beams and frames and extends heat transfer analyses from 1D (in the previous edition) to 2D. It also covers 3D solid element and its application, as well as 2D. Additionally, readers will find an increase in coverage of finite element analysis of dynamic problems. There is also a companion website with examples that are concurrent with the most recent version of the commercial programs. Offers elaborate explanations of basic finite element procedures Delivers clear explanations of the capabilities and limitations of finite element analysis Includes application examples and tutorials for commercial finite element software, such as MATLAB, ANSYS, ABAQUS and NASTRAN Provides numerous examples and exercise problems Comes with a complete solution manual and results of several engineering design projects Introduction to Finite Element Analysis and Design, 2nd Edition is an excellent text for junior and senior level undergraduate students and beginning graduate students in mechanical, civil, aerospace, biomedical engineering, industrial engineering and engineering mechanics.

Download or read book Advanced Finite Element Methods and Applications written by Thomas Apel and published by Springer Science & Business Media. This book was released on 2012-07-16 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume on some recent aspects of finite element methods and their applications is dedicated to Ulrich Langer and Arnd Meyer on the occasion of their 60th birthdays in 2012. Their work combines the numerical analysis of finite element algorithms, their efficient implementation on state of the art hardware architectures, and the collaboration with engineers and practitioners. In this spirit, this volume contains contributions of former students and collaborators indicating the broad range of their interests in the theory and application of finite element methods. Topics cover the analysis of domain decomposition and multilevel methods, including hp finite elements, hybrid discontinuous Galerkin methods, and the coupling of finite and boundary element methods; the efficient solution of eigenvalue problems related to partial differential equations with applications in electrical engineering and optics; and the solution of direct and inverse field problems in solid mechanics.

Download or read book Finite Element Procedures written by Klaus-Jürgen Bathe and published by . This book was released on 1996 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: BASIC APPROACH: Comprehensive -- this text explores the "full range" of finite element methods used in engineering practice for actual applications in computer-aided design. It provides not only an introduction to finite element methods and the commonality in the various techniques, but explores state-of-the-art methods as well -- with a focus on what are deemed to become "classical techniques" -- procedures that will be "standard and authoritative" for finite element analysis for years to come. FEATURES: presents in sufficient depth and breadth elementary concepts AND advanced techniques in statics, dynamics, solids, fluids, linear and nonlinear analysis. emphasizes both the physical and mathematical characteristics of procedures. presents some important mathematical conditions on finite element procedures. contains an abundance of worked-out examples and various complete program listings. includes many exercises/projects that often require the use of a computer program.

Download or read book Automated Solution of Differential Equations by the Finite Element Method written by Anders Logg and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a tutorial written by researchers and developers behind the FEniCS Project and explores an advanced, expressive approach to the development of mathematical software. The presentation spans mathematical background, software design and the use of FEniCS in applications. Theoretical aspects are complemented with computer code which is available as free/open source software. The book begins with a special introductory tutorial for beginners. Following are chapters in Part I addressing fundamental aspects of the approach to automating the creation of finite element solvers. Chapters in Part II address the design and implementation of the FEnicS software. Chapters in Part III present the application of FEniCS to a wide range of applications, including fluid flow, solid mechanics, electromagnetics and geophysics.

Download or read book Fluid structure Interactions written by Thomas Richter and published by Springer. This book was released on 2017-08-26 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts by introducing the fundamental concepts of mathematical continuum mechanics for fluids and solids and their coupling. Special attention is given to the derivation of variational formulations for the subproblems describing fluid- and solid-mechanics as well as the coupled fluid-structure interaction problem. Two monolithic formulations for fluid-structure interactions are described in detail: the well-established ALE formulation and the modern Fully Eulerian formulation, which can effectively deal with problems featuring large deformation and contact. Further, the book provides details on state-of-the-art discretization schemes for fluid- and solid-mechanics and considers the special needs of coupled problems with interface-tracking and interface-capturing techniques. Lastly, advanced topics like goal-oriented error estimation, multigrid solution and gradient-based optimization schemes are discussed in the context of fluid-structure interaction problems.

Download or read book Finite Element Methods in Mechanics written by Noboru Kikuchi and published by CUP Archive. This book was released on 1986-06-12 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook written for mechanical engineering students at first-year graduate level. As such, it emphasizes the development of finite element methods used in applied mechanics. The book starts with fundamental formulations of heat conduction and linear elasticity and derives the weak form (i.e. the principle of virtual work in elasticity) from a boundary value problem that represents the mechanical behaviour of solids and fluids. Finite element approximations are then derived from this weak form. The book contains many useful exercises and the author appropriately provides the student with computer programs in both BASIC and FORTRAN for solving them. Furthermore, a workbook is available with additional computer listings, and also an accompanying disc that contains the BASIC programs for use on IBM-PC microcomputers and their compatibles. Thus the usefulness and versatility of this text is enhanced by the student's ability to practise problem solving on accessible microcomputers.

Download or read book Nonlinear Solid Mechanics for Finite Element Analysis Statics written by Javier Bonet and published by Cambridge University Press. This book was released on 2016-06-23 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear and complete postgraduate introduction to the theory and computer programming for the complex simulation of material behavior.

Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.

Download or read book TEXTBOOK OF FINITE ELEMENT ANALYSIS written by P. SESHU and published by PHI Learning Pvt. Ltd.. This book was released on 2003-01-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for a one-semester course in Finite Element Method, this compact and well-organized text presents FEM as a tool to find approximate solutions to differential equations. This provides the student a better perspective on the technique and its wide range of applications. This approach reflects the current trend as the present-day applications range from structures to biomechanics to electromagnetics, unlike in conventional texts that view FEM primarily as an extension of matrix methods of structural analysis. After an introduction and a review of mathematical preliminaries, the book gives a detailed discussion on FEM as a technique for solving differential equations and variational formulation of FEM. This is followed by a lucid presentation of one-dimensional and two-dimensional finite elements and finite element formulation for dynamics. The book concludes with some case studies that focus on industrial problems and Appendices that include mini-project topics based on near-real-life problems. Postgraduate/Senior undergraduate students of civil, mechanical and aeronautical engineering will find this text extremely useful; it will also appeal to the practising engineers and the teaching community.

Download or read book Finite Element and Boundary Element Techniques from Mathematical and Engineering Point of View written by E. Stein and published by Springer. This book was released on 2014-05-04 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional FEM and the more recent BEM underlie many engineering computational methods and corresponding software. Both methods have their merits and also their limitations. The combination of both methods will provide an improved numerical tool in the future. The aim of this book is to present significant basic formulations of FEM and BEM and to show their common practical and mathematical foundations, their differences and possibilities for their combination. These include variational foundations, FEM and BEM for linear and non-linear elasticity and potential problems, the combination of FEM-BEM asymptotic error analysis, modifications due to corner and crack singularities and corresponding improvement of convergence, plastic analysis, numerical algorithms and engineering applications.

Download or read book The Finite Element Method Solid mechanics written by O. C. Zienkiewicz and published by Butterworth-Heinemann. This book was released on 2000 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonlinear Solid Mechanics for Finite Element Analysis Dynamics written by Javier Bonet and published by Cambridge University Press. This book was released on 2021-03-18 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The perfect introduction to the theory and computer programming for the dynamic simulation of nonlinear solid mechanics.

Download or read book The Finite Element Method for Engineers written by Kenneth H. Huebner and published by John Wiley & Sons. This book was released on 2001-09-07 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eine Einführung in alle Aspekte der finiten Elemente, jetzt schon in der 4. Auflage! Geboten wird eine ausgewogene Mischung theoretischer und anwendungsorientierter Kapitel mit vielen Beispielen. Schwerpunkte liegen auf Anwendungen aus der Mechanik, dem Wärmetransport, der Elastizität sowie auf disziplinübergreifenden Problemen (Strömungen von Fluiden, Elektromagnetismus). Eine nützliche und zuverlässige Informationsquelle für Studenten und Praktiker!

Download or read book The Mathematics of Finite Elements and Applications written by J. R. Whiteman and published by Academic Press. This book was released on 2014-05-10 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mathematics of Finite Elements and Applications provides information pertinent to the mathematics of finite elements, applications, algorithms, and computational techniques. This book discusses the developments in the mathematics of finite elements. Organized into 32 chapters, this book begins with an overview of the basis of the finite element process as a general approximation tool. This text then examines the methods for obtaining bounds on the errors in finite element solutions to two-dimensional elliptic boundary value problems defined on simply connected polygonal regions. Other chapters consider the practical implementation of the Galerkin and the Rayleigh–Ritz methods to equations of importance to physics and engineering. This book discusses as well a fundamental investigation into the problem of convergence in the finite element method. The final chapter deals with an algorithm that is applicable to the analysis of arbitrary plane stress or plane strain configurations. This book is a valuable resource for numerical analysts, mathematical physicist, applied mathematicians, computer scientists, and engineers.