Download or read book Lecture Notes on the Mathematical Theory of Generalized Boltzmann Models written by N. Bellomo and published by World Scientific. This book was released on 2000 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the idea that Boltzmann-like modelling methods can be developed to design, with special attention to applied sciences, kinetic-type models which are called generalized kinetic models. In particular, these models appear in evolution equations for the statistical distribution over the physical state of each individual of a large population. The evolution is determined both by interactions among individuals and by external actions. Considering that generalized kinetic models can play an important role in dealing with several interesting systems in applied sciences, the book provides a unified presentation of this topic with direct reference to modelling, mathematical statement of problems, qualitative and computational analysis, and applications. Models reported and proposed in the book refer to several fields of natural, applied and technological sciences. In particular, the following classes of models are discussed: population dynamics and socio-economic behaviours, models of aggregation and fragmentation phenomena, models of biology and immunology, traffic flow models, models of mixtures and particles undergoing classic and dissipative interactions.
Download or read book Generalized Kinetic Models In Applied Sciences Lecture Notes On Mathematical Problems written by Luisa Arlotti and published by World Scientific Publishing Company. This book was released on 2003-08-12 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with analytic problems related to some developments and generalizations of the Boltzmann equation toward the modeling and qualitative analysis of large systems that are of interest in applied sciences. These generalizations are documented in the various surveys edited by Bellomo and Pulvirenti with reference to models of granular media, traffic flow, mathematical biology, communication networks, and coagulation models.The above literature motivates applied mathematicians to study the Cauchy problem and to develop an asymptotic analysis for models regarded as developments of the Boltzmann equation. This book aims to initiate the research plan by the analyzing afore mentioned analysis problems.The first generalization dealt with refers to the averaged Boltzmann equation, which is obtained by suitable averaging of the distribution function of the field particles into the action domain of the test particle. This model is further developed to describe equations with dissipative collisions and a class of models that are of interest in mathematical biology. In this latter case the state of the particles is defined not only by a mechanical variable but also by a biological microscopic state.The book is essentially devoted to analytic aspects and deals with the analysis of the Cauchy problem and with the development of an asymptotic theory to obtain the macroscopic description from the mesoscopic one.
Download or read book Generalized Kinetic Models in Applied Sciences written by Luisa Arlotti and published by World Scientific. This book was released on 2003 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with analytic problems related to some developments and generalizations of the Boltzmann equation toward the modeling and qualitative analysis of large systems that are of interest in applied sciences. These generalizations are documented in the various surveys edited by Bellomo and Pulvirenti with reference to models of granular media, traffic flow, mathematical biology, communication networks, and coagulation models. The first generalization dealt with refers to the averaged Boltzmann equation, which is obtained by suitable averaging of the distribution function of the field particles into the action domain of the test particle. This model is further developed to describe equations with dissipative collisions and a class of models that are of interest in mathematical biology. In this latter case the state of the particles is defined not only by a mechanical variable but also by a biological microscopic state.
Download or read book Lecture Notes on the Discretization of the Boltzmann Equation written by N. Bellomo and published by World Scientific. This book was released on 2003 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents contributions on the following topics: discretization methods in the velocity and space, analysis of the conservation properties, asymptotic convergence to the continuous equation when the number of velocities tends to infinity, and application of discrete models. It consists of ten chapters. Each chapter is written by applied mathematicians who have been active in the field, and whose scientific contributions are well recognized by the scientific community.
Download or read book High dimensional Nonlinear Diffusion Stochastic Processes written by Yevgeny Mamontov and published by World Scientific. This book was released on 2001 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This book is one of the first few devoted to high-dimensional diffusion stochastic processes with nonlinear coefficients. These processes are closely associated with large systems of Ito's stochastic differential equations and with discretized-in-the-parameter versions of Ito's stochastic differential equations that are nonlocally dependent on the parameter. The latter models include Ito's stochastic integro-differential, partial differential and partial integro-differential equations.The book presents the new analytical treatment which can serve as the basis of a combined, analytical -- numerical approach to greater computational efficiency. Some examples of the modelling of noise in semiconductor devices are provided
Download or read book Wavelet and Wave Analysis as Applied to Materials with Micro Or Nanostructure written by Carlo Cattani and published by World Scientific. This book was released on 2007 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This seminal book unites three different areas of modern science: the micromechanics and nanomechanics of composite materials; wavelet analysis as applied to physical problems; and the propagation of a new type of solitary wave in composite materials, nonlinear waves. Each of the three areas is described in a simple and understandable form, focusing on the many perspectives of the links among the three.All of the techniques and procedures are described here in the clearest and most open form, enabling the reader to quickly learn and use them when faced with the new and more advanced problems that are proposed in this book. By combining these new scientific concepts into a unitary model and enlightening readers on this pioneering field of research, readers will hopefully be inspired to explore the more advanced aspects of this promising scientific direction. The application of wavelet analysis to nanomaterials and waves in nanocomposites can be very appealing to both specialists working on theoretical developments in wavelets as well as specialists applying these methods and experiments in the mechanics of materials.
Download or read book Advanced Mathematical And Computational Tools In Metrology Vi written by Patrizia Ciarlini and published by World Scientific. This book was released on 2004-07-09 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects refereed contributions based on the presentations made at the Sixth Workshop on Advanced Mathematical and Computational Tools in Metrology, held at the Istituto di Metrologia “G. Colonnetti” (IMGC), Torino, Italy, in September 2003. It provides a forum for metrologists, mathematicians and software engineers that will encourage a more effective synthesis of skills, capabilities and resources, and promotes collaboration in the context of EU programmes, EUROMET and EA projects, and MRA requirements. It contains articles by an important, worldwide group of metrologists and mathematicians involved in measurement science and, together with the five previous volumes in this series, constitutes an authoritative source for the mathematical, statistical and software tools necessary to modern metrology.The proceedings have been selected for coverage in:Index to Scientific & Technical Proceedings® (ISTP® / ISI Proceedings)Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)CC Proceedings — Engineering & Physical Sciences
Download or read book Mathematical Methods for the Natural and Engineering Sciences written by Ronald E. Mickens and published by World Scientific. This book was released on 2004 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a variety of methods required for the analysis and solution of equations which arise in the modeling of phenomena from the natural and engineering sciences. It can be used productively by both undergraduate and graduate students, as well as others who need to learn and understand these techniques. A detailed discussion is also presented for several topics that are usually not included in standard textbooks at this level: qualitative methods for differential equations, dimensionalization and scaling, elements of asymptotics, difference equations, and various perturbation methods. Each chapter contains a large number of worked examples and provides references to the appropriate literature.
Download or read book Applied and Industrial Mathematics in Italy II written by Vincenzo Cutello and published by World Scientific. This book was released on 2007 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial mathematics is evolving into an important branch of mathematics. Mathematicians, in particular in Italy, are becoming increasingly aware of this new trend and are engaged in bridging the gap between highly specialized mathematical research and the emerging demand for innovation from industry. The contributions in this volume provide both R&D workers in industry with a general view of existing skills, and academics with state-of-the-art applications of mathematics to real-world problems, which may also be incorporated in advanced courses.
Download or read book Mathematical Modelling of Continuum Physics written by Angelo Morro and published by Springer Nature. This book was released on 2023-03-19 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides a comprehensive and self-contained treatment of continuum physics, illustrating a systematic approach to the constitutive equations for wide-ranging classes of materials. Derivations of results are detailed through careful proofs, and the contents have been developed to ensure a self-contained and consistent presentation. Part I reviews the kinematics of continuous bodies and illustrates the general setting of balance laws. Essential preliminaries to continuum physics – such as reference and current configurations, transport relations, singular surfaces, objectivity, and objective time derivatives – are covered in detail. A chapter on balance equations then develops the balance laws of mass, linear momentum, angular momentum, energy, and entropy, as well as the balance laws in electromagnetism. Part II is devoted to the general requirements on constitutive models, emphasizing the application of objectivity and consistency with the second law of thermodynamics. Common models of simple materials are then reviewed, and in this framework, detailed descriptions are given of solids (thermoelastic, elastic, and dissipative) and fluids (elastic, thermoelastic, viscous, and Newtonian). A wide of variety of constitutive models are investigated in Part III, which consists of separate chapters focused on several types of non-simple materials: materials with memory, aging and higher-order grade materials, mixtures, micropolar media, and porous materials. The interaction of the electromagnetic field with deformation is also examined within electroelasticity, magnetoelasticity, and plasma theory. Hysteretic effects and phase transitions are considered in Part IV. A new approach is established by treating entropy production as a constitutive function in itself, as is the case for entropy and entropy flux. This proves to be conceptually and practically advantageous in the modelling of nonlinear phenomena, such as those occurring in hysteretic continua (e.g., plasticity, electromagnetism, and the physics of shape memory alloys). Mathematical Modelling of Continuum Physics will be an important reference for mathematicians, engineers, physicists, and other scientists interested in research or applications of continuum mechanics.
Download or read book Mathematical Models and Methods for Smart Material written by Mauro Fabrizio and published by World Scientific. This book was released on 2002 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the conference on OC Mathematical Models and Methods for Smart MaterialsOCO, held in Italy in 2001. The papers are divided into four parts: OCOMethods in Materials ScienceOCO deals mainly with mathematical techniques for the investigation of physical systems, such as liquid crystals, materials with internal variables, amorphous materials, and thermoelastic materials. Also, techniques are exhibited for the analysis of stability and controllability of classical models of continuum mechanics and of dynamical systems.OCOModelling of Smart MaterialsOCO is devoted to models of superfluids, superconductors, materials with memory, nonlinear elastic solids, and damaged materials. In the elaboration of the models, thermodynamic aspects play a central role in the characterization of the constitutive properties.OCOWell-Posedness in Materials with MemoryOCO deals with existence, uniqueness and stability for the solution of problems, most often expressed by integrodifferential equations, which involve materials with fading memory. Also, attention is given to exponential decay in viscoelasticity, inverse problems in heat conduction with memory, and automatic control for parabolic equations.OCOAnalytic Problems in Phase TransitionsOCO discusses nonlinear partial differential equations associated with phase transitions, and hysteresis, possibly involving fading memory effects. Particular applications are developed for the phase-field model with memory, the Stefan problem with a Cattaneo-type equation, the hysteresis in thermo-visco-plasticity, and the solid-solid phase transition."
Download or read book Motor Vehicle Dynamics Modelling And Simulation written by Giancarlo Genta and published by World Scientific. This book was released on 1997-04-19 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book starts with an historical overview of road vehicles. The first part deals with the forces exchanged between the vehicle and the road and the vehicle and the air with the aim of supplying the physical facts and the relevant mathematical models about the forces which dominate the dynamics of the vehicle.The second part deals with the dynamic behaviour of the vehicle in normal driving conditions with some extensions towards conditions encountered in high-speed racing driving.
Download or read book Clusters And Nano assemblies Physical And Biological Systems written by Purusottam Jena and published by World Scientific. This book was released on 2005-05-09 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the field of clusters and nano-structures in the physical sciences has been actively pursued only over the past two decades, nature has known the benefits of the nanoscale for a very long time. The focus of the International Symposium on Clusters and Nano-Assemblies: Physical and Biological Systems was to explore ways in which an understanding of the unique properties of nano-scale biological systems such as proteins, enzyme reactions, RNA, and DNA can help us design novel materials composed of inorganic nano-scale systems, and how techniques developed in the physical sciences can lead to a fundamental understanding of biological systems. Bringing together the expert contributions from the conference, this book deals with the fundamental science and technology of atomic clusters, nano-structures and their assemblies in physical and biological systems. It explores in fascinating detail the manner in which finite size, low dimensionality, and reduced symmetry affect the properties of nano-assemblies.
Download or read book Advanced Mathematical Computational Tools in Metrology VII written by P. Ciarlini and published by World Scientific. This book was released on 2006 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the refereed contributions based on the presentations made at the Seventh Workshop on Advanced Mathematical and Computational Tools in Metrology, a forum for metrologists, mathematicians and software engineers that will encourage a more effective synthesis of skills, capabilities and resources. The volume contains articles by world renowned metrologists and mathematicians involved in measurement science and, together with the six previous volumes in this series, constitutes an authoritative source of the mathematical, statistical and software tools necessary in modern metrology. Sample Chapter(s). Chapter 1: Modelling Measurement Processes in Complex Systems with Partial Differential Equations: From Heat Conduction to the Heart (537 KB). Contents: Modeling Measurement Processes in Complex Systems with Partial Differential Equations: From Heat Conduction to the Heart (M Bnr et al.); Mereotopological Approach for Measurement Software (E Benoit & R Dapoigny); Data Evaluation of Key Comparisons Involving Several Artefacts (M G Cox et al.); Box-Cox Transformations and Robust Control Charts in SPC (M I Gomes & F O Figueiredo); Multisensor Data Fusion and Its Application to Decision Making (P S Giruo et al.); Generic System Design for Measurement Databases OCo Applied to Calibrations in Vacuum Metrology, Bio-Signals and a Template System (H Gross et al.); Evaluation of Repeated Measurements from the Viewpoint of Conventional and Bayesian Statistics (I Lira & W WAger); Detection of Outliers in Interlaboratory Testing (C Perruchet); On Appropriate Methods for the Validation of Metrological Software (D Richter et al.); Data Analysis OCo A Dialogue with the Data (D S Sivia); Validation of Soft Sensors in Monitoring Ambient Parameters (P Ciarlini et al.); Evaluation of Standard Uncertainties in Nested Structures (E Filipe); Measurement System Analysis and Statistical Process Control (A B Forbes); Monte Carlo Study on Logical and Statistical Correlation (B Siebert et al.); Some Problems Concerning the Estimate of the Degree of Equivalence in MRA Key Comparisons and of Its Uncertainty (F Pavese); Preparing for a European Research Area Network in Metrology: Where are We Now? (M Khne et al.); and other papers. Readership: Researchers, graduate students, academics and professionals in metrology."
Download or read book Applied And Industrial Mathematics In Italy Proceedings Of The 7th Conference written by Mario Primicerio and published by World Scientific. This book was released on 2005-06-14 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial mathematics is evolving into an important branch of mathematics. Mathematicians, in Italy in particular, are becoming increasingly aware of this new trend and are engaged in bridging the gap between highly specialized mathematical research and the emerging demand for innovation from industry. In this respect, the contributions in this volume provide both R&D workers in industry with a general view of existing skills, and academics with state-of-the-art applications of mathematics to real-world problems, which may also be incorporated in advanced courses.The proceedings have been selected for coverage in:• Index to Scientific & Technical Proceedings® (ISTP® / ISI Proceedings)• Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)• CC Proceedings — Engineering & Physical Sciences
Download or read book Mechanical And Thermodynamical Modeling Of Fluid Interfaces written by Renee Gatignol and published by World Scientific. This book was released on 2001-06-08 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes a comprehensive survey of the balance equations for mass, momentum and energy for the interfaces in pure fluids and mixtures. Constitutive laws are presented for many situations in engineering science, and examples are provided, including surface viscosity effects, variable surface tension and vapor recoil. In addition, some extensions of existing theory are given: stretch effect in premixed flames, relaxation zones downstream two-phase shock waves, and effective surface tension for steep gradient zones.
Download or read book Differential Models and Neutral Systems for Controlling the Wealth of Nations written by Ethelbert N. Chukwu and published by World Scientific. This book was released on 2001 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph derives from familiar economic principles the dynamics of national income, the interest rate, employment, the value of capital stock, prices, and the cumulative balance of payments. This is a Volterra neutral integrodifferential game of pursuit. The quarry control is government intervention in the form of taxation, control of money supply, tariffs, foreign credit, interest equalization tax, preferential trade agreements (which reduce trade barriers and enhance trade flows between nations), transportation and distance between trading partners. The pursuer controls include wages and productivity. The book provides conditions for controllability and then deduces how big government intervention (compared with private firms' contributions) should be to ensure the possibility of growth.The reader is assumed to be familiar with advanced calculus and to have a working knowledge of ordinary differential equations. The required theory of hereditary systems can be obtained from the book itself.