Download or read book Learn By Examples A Quick Guide To Internet of Things With Arduino and Data written by Eric M. H. Goh and published by SVBook. This book was released on with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aim to equip the reader with Arduino Programming and Internet of Things (IoT) basics. There will be many examples and explanations that are lucid and straight to the point. You will be walked through various projects. The author would recommend you have electronics basics knowledge. This book do show that you can use data science prediction model to predict or convert sensors values to respective units such as degree Celsius. Content Covered: IntroductionGetting Started (Installing IDE, ...)Language Essentials (variables, loops, ...)Digital and Analog I/OVarious Projects (Servo, DC, LEDs, Buzzer, IoT) You will need some electronics skills, and purchase some Arduino kits to start with. We do use online simulator that is free.
Download or read book TinyML written by Pete Warden and published by O'Reilly Media. This book was released on 2019-12-16 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deep learning networks are getting smaller. Much smaller. The Google Assistant team can detect words with a model just 14 kilobytes in size—small enough to run on a microcontroller. With this practical book you’ll enter the field of TinyML, where deep learning and embedded systems combine to make astounding things possible with tiny devices. Pete Warden and Daniel Situnayake explain how you can train models small enough to fit into any environment. Ideal for software and hardware developers who want to build embedded systems using machine learning, this guide walks you through creating a series of TinyML projects, step-by-step. No machine learning or microcontroller experience is necessary. Build a speech recognizer, a camera that detects people, and a magic wand that responds to gestures Work with Arduino and ultra-low-power microcontrollers Learn the essentials of ML and how to train your own models Train models to understand audio, image, and accelerometer data Explore TensorFlow Lite for Microcontrollers, Google’s toolkit for TinyML Debug applications and provide safeguards for privacy and security Optimize latency, energy usage, and model and binary size
Download or read book Getting Started with Arduino written by Massimo Banzi and published by "O'Reilly Media, Inc.". This book was released on 2011-09-13 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an introduction to the open-source electronics prototyping platform.
Download or read book Building Arduino Projects for the Internet of Things written by Adeel Javed and published by Apress. This book was released on 2016-06-11 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain a strong foundation of Arduino-based device development, from which you can go in any direction according to your specific development needs and desires. You'll build Arduino-powered devices for everyday use, and then connect those devices to the Internet. You'll be introduced to the building blocks of IoT, and then deploy those principles to by building a variety of useful projects. Projects in the books gradually introduce the reader to key topics such as internet connectivity with Arduino, common IoT protocols, custom web visualization, and Android apps that receive sensor data on-demand and in realtime. IoT device enthusiasts of all ages will want this book by their side when developing Android-based devices. If you're one of the many who have decided to build your own Arduino-powered devices for IoT applications, then Building Arduino Projects for the Internet of Things is exactly what you need. This book is your single resource--a guidebook for the eager-to-learn Arduino enthusiast--that teaches logically, methodically, and practically how the Arduino works and what you can build with it. Written by a software developer and solution architect who got tired of hunting and gathering various lessons for Arduino development as he taught himself all about the topic. For Arduino enthusiasts, this book not only opens up the world of IoT applications, you will also learn many techniques that likely would not be obvious if not for experience with such a diverse group of applications What You'll Learn Create an Arduino circuit that senses temperature Publish data collected from an Arduino to a server and to an MQTT broker Set up channels in Xively Using Node-RED to define complex flows Publish data visualization in a web app Report motion-sensor data through a mobile app Create a remote control for house lights Set up an app in IBM Bluematrix Who This Book Is For IoT device enthusiasts of all ages will want this book by their side when developing Android-based devices.
Download or read book Building Internet of Things with the Arduino written by Charalampos Doukas and published by Createspace Independent Publishing Platform. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide you with all the information you need to design and create your own Internet of Things (IoT) applications using the Arduino platform.
Download or read book Arduino Essentials written by Francis Perea and published by Packt Publishing Ltd. This book was released on 2015-02-24 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are a hobbyist who wants to develop projects based on Arduino as the main microcontroller platform or an engineer interested in finding out what the Arduino platform offers, then this book is ideal for you. Some prior knowledge of the C programming language is required.
Download or read book Windows 10 for the Internet of Things written by Charles Bell and published by Apress. This book was released on 2016-10-27 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manage and control Internet-connected devices from Windows and Raspberry Pi. Master the Windows IoT Core application programming interface and feature set to develop Internet of Things applications on the Raspberry Pi using your Windows and .NET programming skills. Windows 10 for the Internet of Things presents a set of example projects covering a wide range of techniques designed specifically to jump start your own Internet of Things creativity. You'll learn everything you need to know about Windows IoT Core in order to develop Windows and IoT applications that run on the Pi. Microsoft’s release of Windows IoT Core is groundbreaking in how it makes the Raspberry Pi and Internet of Things programming accessible to Windows developers. Now it’s possible to develop for the Raspberry Pi using native Windows and all the related programming skills that Windows programmers have learned from developing desktop and mobile applications. Windows 10 becomes a gateway by which many can experience hardware and Internet of Things development who may never have had the opportunity otherwise. However, even savvy Windows programmers require help to get started with hardware development. This book, Windows 10 for the Internet of Things, provides just the help you need to get started in putting your Windows skills to use in a burgeoning new world of development for small devices that are ubiquitously connected to the Internet. What You Will Learn Learn Windows 10 on the Raspberry Pi Read sensor data and control actuators Connect to and transmit data into the cloud Remotely control your devices from any web browser Develop IOT applications under Windows using C# and Python Store your IOT data in a database for later analysis Who This Book Is For Developers and enthusiasts wanting to take their skills in Windows development and jump on board one of the largest and fastest growing trends to hit the technology world in years – that of connecting everyday devices to the Internet. This book shows how to develop for Microsoft’s operating-system for devices, Windows 10 IoT Core. Readers learn to develop in C# and Python using Visual Studio, for deployment on devices such as the Raspberry Pi and the Ardunio.
Download or read book AN INTRODUCTION TO MACHINE LEARNING AND IOT written by Dr.V.Maniraj and published by SK Research Group of Companies. This book was released on 2022-07-22 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr.V.Maniraj, Associate Professor & Coordinator, PG & Research Department of Computer Science, AVVM SRI PUSHPAM COLLEGE (AUTONOMOUS), Poondi, Thanjavur, Tamil Nadu, India. T.RAMYAVENI, Research Scholar & Assistant Professor, PG & Research Department of Computer Science, AVVM SRI PUSHPAM COLLEGE (AUTONOMOUS), Poondi, Thanjavur, Tamil Nadu, India.
Download or read book 2024 25 O M4 R5 Level Introduction to Internet of Things Study Material written by YCT Expert Team and published by YOUTH COMPETITION TIMES. This book was released on with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2024-25 ‘O’ [M4-R5]Level Introduction to Internet of Things Study Material
Download or read book Tools and Technologies for the Development of Cyber Physical Systems written by Balandin, Sergey and published by IGI Global. This book was released on 2019-12-27 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the continual development of professional industries in today’s modernized world, certain technologies have become increasingly applicable. Cyber-physical systems, specifically, are a mechanism that has seen rapid implementation across numerous fields. This is a technology that is constantly evolving, so specialists need a handbook of research that keeps pace with the advancements and methodologies of these devices. Tools and Technologies for the Development of Cyber-Physical Systems is an essential reference source that discusses recent advancements of cyber-physical systems and its application within the health, information, and computer science industries. Featuring research on topics such as autonomous agents, power supply methods, and software assessment, this book is ideally designed for data scientists, technology developers, medical practitioners, computer engineers, researchers, academicians, and students seeking coverage on the development and various applications of cyber-physical systems.
Download or read book MySQL for the Internet of Things written by Charles Bell and published by Apress. This book was released on 2016-02-13 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the problems facing Internet of Things developers and explores current technologies and techniques to help you manage, mine, and make sense of the data being collected through the use of the world’s most popular database on the Internet - MySQL. The IoT is poised to change how we interact with and perceive the world around us, and the possibilities are nearly boundless. As more and more connected devices generate data, we will need to solve the problem of how to collect, store, and make sense of IoT data by leveraging the power of database systems. The book begins with an introduction of the MySQL database system and storage of sensor data. Detailed instructions and examples are provided to show how to add database nodes to IoT solutions including how to leverage MySQL high availability, including examples of how to protect data from node outages using advanced features of MySQL. The book closes with a comparison of raw and transformed data showing how transformed data can improve understandability and help you cut through a clutter of superfluous data toward the goal of mining nuggets of useful knowledge. In this book, you'll learn to: Understand the crisis of vast volumes of data from connected devices Transform data to improve reporting and reduce storage volume Store and aggregate your IoT data across multiple database servers Build localized, low-cost MySQL database servers using small and inexpensive computers Connect Arduino boards and other devices directly to MySQL database servers Build high availability MySQL solutions among low-power computing devices
Download or read book Learn Arduino Prototyping in 10 days written by Kallol Bosu Roy Choudhuri and published by Packt Publishing Ltd. This book was released on 2017-06-29 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate power-packed crash course in building Arduino-based projects in just 10 days! About This Book A carefully designed 10-day crash course, covering major project/device types, with 20+ unique hands-on examples Get easy-to-understand explanations of basic electronics fundamentals and commonly used C sketch functions This step-by-step guide with 90+ diagrams and 50+ important tips will help you become completely self-reliant and confident Who This Book Is For This book is a beginner's crash course for professionals, hobbyists, and students who are tech savvy, have a basic level of C programming knowledge, and basic familiarity with electronics, be it for embedded systems or the Internet of Things. What You Will Learn Write Arduino sketches and understand the fundamentals of building prototype circuits using basic electronic components, such as resistors, transistors, and diodes Build simple, compound, and standalone devices with auxiliary storage (SD card), a DC battery, and AC power supplies Deal with basic sensors and interface sensor modules by using sensor datasheets Discover the fundamental techniques of prototyping with actuators Build remote-controlled devices with infrared (IR), radio frequency (RF), and telephony with GSM Learn IoT edge device prototyping (using ESP8266) and IoT cloud configuration In Detail This book is a quick, 10-day crash course that will help you become well acquainted with the Arduino platform. The primary focus is to empower you to use the Arduino platform by applying basic fundamental principles. You will be able to apply these principles to build almost any type of physical device. The projects you will work through in this book are self-contained micro-controller projects, interfacing with single peripheral devices (such as sensors), building compound devices (multiple devices in a single setup), prototyping standalone devices (powered from independent power sources), working with actuators (such as DC motors), interfacing with an AC-powered device, wireless devices (with Infrared, Radio Frequency and GSM techniques), and finally implementing the Internet of Things (using the ESP8266 series Wi-Fi chip with an IoT cloud platform). The first half of the book focuses on fundamental techniques and building basic types of device, and the final few chapters will show you how to prototype wireless devices. By the end of this book, you will have become acquainted with the fundamental principles in a pragmatic and scientific manner. You will also be confident enough to take up new device prototyping challenges. Style and approach This step-by- step guide will serve as a quick, 10-day crash course to help you become well acquainted with the Arduino platform.
Download or read book JavaFX 8 Introduction by Example written by Mark Heckler and published by Apress. This book was released on 2014-06-14 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: JavaFX 8: Introduction by Example shows you how to use your existing Java skills to create graphically exciting client applications with the JavaFX 8 platform. The book is a new and much improved edition of JavaFX 2.0: Introduction by Example, taking you through a series of engaging, fun-to-work examples that bring you up to speed on the major facets of the platform. It will help you to create applications that look good, are fun to use, and that take advantage of the medium to present data of all types in ways that engage the user and lead to increased productivity. Entirely example-based, JavaFX 8: Introduction by Example begins with the fundamentals of installing the software and creating a simple interface. From there, you'll move in progressive steps through the process of developing applications using JavaFX’s standard drawing primitives. You'll then explore images, animations, media, and web. This new edition incorporates the changes resulting from the switch to Java 8 SDK. It covers advanced topics such as custom controls, JavaFX 3D, gesture devices, and embedded systems. Best of all, the book is full of working code that you can adapt and extend to all your future projects. Entirely example-based Filled with fun and practical code examples Covers all that's new in Java 8 relating to JavaFX such as Lambda expressions and Streams Covers gesture devices, 3D display, embedded systems, and other advanced topics
Download or read book Python Programming for Arduino written by Pratik Desai and published by Packt Publishing Ltd. This book was released on 2015-02-27 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the book for you if you are a student, hobbyist, developer, or designer with little or no programming and hardware prototyping experience, and you want to develop IoT applications. If you are a software developer or a hardware designer and want to create connected devices applications, then this book will help you get started.
Download or read book Internet of Things with Arduino Cookbook written by Marco Schwartz and published by Packt Publishing Ltd. This book was released on 2016-09-30 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 60 recipes will help you build smart IoT solutions and surprise yourself with captivating IoT projects you thought only existed in Bond movies About This Book This book offers key solutions and advice to address the hiccups faced when working on Arduino-based IoT projects in the real world Take your existing skills and capabilities to the next level by building challenging IoT applications with ease. Be the tech disruptor you always wanted to be with key recipes that help you solve Arduino IoT related problems smarter and faster. Put IoT to work through recipes on building Arduino-based devices that take control of your home, health, and life! Who This Book Is For This book is primarily for tech enthusiasts and early IoT adopters who would like to make the most of IoT and address the challenges encountered while developing IoT-based applications with Arduino. This book is also good for developers with basic electronics knowledge who need help to successfully build Arduino projects. What You Will Learn Monitor several Arduino boards simultaneously Tweet sensor data directly from your Arduino board Post updates on your Facebook wall directly from your Arduino board Create an automated access control with a fingerprint sensor Control your entire home from a single dashboard Make a GPS tracker that you can track in Google Maps Build a live camera that streams directly from your robot In Detail Arduino is a powerful and very versatile platform used by millions of people around the world to create DIY electronics projects. It can be connected to a wide variety of sensors and other components, making it the ideal platform to build amazing Internet of Things (IoT) projects on—the next wave in the era of computing. This book takes a recipe-based approach, giving you precise examples on how to build IoT projects of all types using the Arduino platform. You will come across projects from several fields, including the popular robotics and home automation domains. Along with being introduced to several forms of interactions within IoT, including projects that directly interact with well-known web services such as Twitter, Facebook, and Dropbox we will also focus on Machine-to-Machine (M2M) interactions, where Arduino projects interact without any human intervention. You will learn to build a few quick and easy-to-make fun projects that will really expand your horizons in the world of IoT and Arduino. Each chapter ends with a troubleshooting recipe that will help you overcome any problems faced while building these projects. By the end of this book, you will not only know how to build these projects, but also have the skills necessary to build your own IoT projects in the future. Style and approach This book takes a recipe-based approach, giving you precise examples on how to build IoT projects using the Arduino platform. You will learn to build fun and easy projects through a task-oriented approach.
Download or read book Hands on ESP32 with Arduino IDE written by Asim Zulfiqar and published by Packt Publishing Ltd. This book was released on 2024-01-19 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build a strong foundation in IoT development and take your skills to the next level by mastering ESP32 and Arduino IDE 2.0, learning IoT protocols, and automating your projects Key Features Learn how to Interface ESP32 with various components for IoT projects Understand IoT protocols and automation theories with practical examples Implement automation and IoT knowledge in ESP32 projects for real-world applications Purchase of the print or Kindle book includes a free PDF eBook Book DescriptionESP32 is a versatile microcontroller and a great starting point for anyone venturing into the IoT realm, but its configuration and interfacing of sensors can be challenging for new users. Arduino Integrated Development Environment (IDE) simplifies programming, uploading code, and utilization of ESP32 capabilities, enabling users to incorporate it into their IoT projects with ease. This book will help you learn the essentials of sensing, networking, data processing, and applications with ESP32, laying a strong foundation for further IoT development. Starting with ESP32 and Arduino Ide 2.0 basics, you'll first explore practical implementation examples of interfacing sensors with ESP32. These examples will also teach you how to interface the ESP32 camera and display modules with ESP32. As you progress, you’ll get to grips with IoT network and data protocols, as well as the many options they unlock within IoT applications. The book will also help you leverage your newly acquired knowledge with exciting projects ranging from smart connected devices to data loggers and automation. By the end of this book, you'll confidently navigate ESP32 projects with newfound knowledge and skills, know what IoT protocol to select for your applications, and successfully build and deploy your own IoT projects.What you will learn Understand the architecture of ESP32 including all its ins and outs Get to grips with writing code for ESP32 using Arduino IDE 2.0 Interface sensors with ESP32, focusing on the science behind it Familiarize yourself with the architecture of various IoT network protocols in-depth Gain an understanding of the network protocols involved in IoT device communication Evaluate and select the ideal data-based IoT protocol for your project or application Apply IoT principles to real-world projects using Arduino IDE 2.0 Who this book is for This book is for electronics enthusiasts, hobbyists, and other professionals looking to design IoT applications utilizing ESP32. While it’s designed to be accessible for beginners, a basic understanding of electronics and some experience with programming concepts is a prerequisite.
Download or read book Fundamentals of IoT written by Rajan Gupta and published by BPB Publications. This book was released on 2023-07-31 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to IoT's core concepts and principles KEY FEATURES ● Discover the fascinating world of Arduino and unlock its potential for IoT applications. ● Learn about wireless communication protocols, data aggregation, and the overall architecture of IoT networks. ● Explore the wide range of applications that IoT offers across various industries and domains. DESCRIPTION The Internet of Things (IoT) is a network of physical objects embedded with sensors, software, and connectivity, enabling them to collect and exchange data. It revolutionizes the way we interact with our surroundings by connecting devices and allowing them to communicate over the Internet. If you want to dive deeper into the fascinating world of IoT, then this book is for you. This book is a comprehensive book that introduces you to the world of IoT. It covers the definition and vision of IoT, provides an overview of the conceptual framework and technologies behind it, and presents various examples of IoT applications. The book also delves into the hardware components used in IoT, such as sensors and actuators, and explores embedded platforms like Arduino and Raspberry Pi. Furthermore, it discusses programming with Arduino and highlights design principles and network communication aspects of IoT. The book concludes by addressing the challenges and real-life applications of IoT, including smart cities, healthcare, and home automation. By the end of the book, you will possess the knowledge necessary to navigate the complex and ever-evolving IoT landscape. WHAT YOU WILL LEARN ● Gain insights into embedded platforms and their role in IoT. ● Select the right hardware devices to create efficient and effective IoT systems. ● Explore the intricacies of the Arduino board architecture. ● Learn the essentials of programming Arduino. ● Understand the challenges faced in designing and implementing IoT solutions. WHO THIS BOOK IS FOR This book caters to the learning needs of graduate and postgraduate students in Computer Application/Engineering. It is also suitable for anyone interested in gaining a comprehensive understanding of the fundamentals of the Internet of Things. TABLE OF CONTENTS 1. Introduction to Internet of Things 2. Hardware for IoT 3. Embedded Platforms for IoT 4. Programming the Arduino 5. IoT and M2M Design Standards 6. Network and Communication Aspects of IoT 7. IoT Design Challenges 8. Applications of IoT 9. Appendix: Hands-On Practical Problems
