Download or read book Lean Mixture Operation of Hydrogen fueled Spark Ignition Engines written by James S. Wallace and published by . This book was released on 1985 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lean Combustion written by Derek Dunn-Rankin and published by Academic Press. This book was released on 2011-07-28 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion under sufficiently fuel-lean conditions can have the desirable attributes of high efficiency and low emissions, this being particularly important in light of recent and rapid increases in the cost of fossil fuels and concerns over the links between combustion and global climate change. Lean Combustion is an eminently authoritative, reference work on the latest advances in lean combustion technology and systems. It will offer engineers working on combustion equipment and systems both the fundamentals and the latest developments in more efficient fuel usage and in much-sought-after reductions of undesirable emissions, while still achieving desired power output and performance. This volume brings together research and design of lean combustion systems across the technology spectrum in order to explore the state-of-the-art in lean combustion and its role in meeting current and future demands on combustion systems. Readers will learn about advances in the understanding of ultra lean fuel mixtures and how new types of burners and approaches to managing heat flow can reduce problems often found with lean combustion such as slow, difficult ignition and frequent flame extinction. The book will also offer abundant references and examples of recent real-world applications. - Covers all major recent developments in lean combustion science and technology, with new applications in both traditional combustion schemes as well as such novel uses as highly preheated and hydrogen-fueled systems - Offers techniques for overcoming difficult ignition problems and flame extinction with lean fuel mixtures - Covers new developments in lean combustion using high levels of pre-heat and heat re-circulating burners, as well as the active control of lean combustion instabilities
Download or read book Mixture Formation in Spark Ignition Engines written by Hans Peter Lenz and published by Springer. This book was released on 2013-11-11 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twentyfour years have gone by since the publication of K. Lohner and H. Muller's comprehen sive work "Gemischbildung und Verbrennung im Ottomotor" in 1967 [1.1]' Naturally, the field of mixture formation and combustion in the spark-ignition engine has wit nessed great technological advances and many new findings in the intervening years, so that the time seemed ripe for presenting a summary of recent research and developments. There fore, I gladly took up the suggestion of the editors of this series of books, Professor Dr. H. List and Professor Dr. A. Pischinger, to write a book summarizing the present state of the art. A center of activity of the Institute of Internal-Combustion Engines and Automotive Engineering at the Vienna Technical University, which I am heading, is the field of mixture formation -there fore, many new results that have been achieved in this area in collaboration with the respective industry have been included in this volume. The basic principles of combustion are discussed only to that extent which seemect necessary for an understanding of the effects of mixture formation. The focal point of this volume is the mixture formation in spark-ignition engines, covering both the theory and actual design of the mixture formation units and appropriate intake manifolds. Also, the related measurement technology is explained in this work.
Download or read book Hydrogen IC Engines written by Society of Automotive Engineers and published by SAE International. This book was released on 2006 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogen Engine Performance Analysis Project written by Robert R. Adt and published by . This book was released on 1980 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lean burn Characteristics of a Gasoline Engine Enriched with Hydrogen from a Plasmatron Fuel Reformer written by Edward Joseph Tully and published by . This book was released on 2002 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Spark Ignited Direct Injection Gasoline Engines written by F. Zhao and published by Elsevier. This book was released on 2000-02-08 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.
Download or read book Hydrogen Enrichment for the Extension of the Lean Limit and Enhanced Combustion in an Alcohol fueled Spark ignition Engine written by Jason Brian Greenwood and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An investigation was made to determine the effects of hydrogen enrichment in the lean combustion regime for ethanol and to determine if it could extend the lean operating limit for both ethanol and methanol. In this study, a 0.745 liter 2-cylinder Kawasaki engine was modified to operate with both alcohol and hydrogen fuels. Hydrogen concentrations of 0%, 15%, and 30% by volume hydrogen in the primary fuel were fumigated into the intake before the throttle; the engine was operated at 2000 RPM and part throttle. Data were collected to calculate NO and HC emissions, power, exhaust gas temperature, thermal efficiency, volumetric efficiency, brake-specific fuel consumption, and flame development and rapid burning angles. It was shown that hydrogen enrichment demonstrated an ability to not only decrease NO emissions, but also stabilize and accelerate the combustion process in the lean combustion regime. At a given equivalence ratio, hydrogen addition decreased NO emissions; this decrease was attributed to a change in dominate NO production mechanism(s) under lean operating conditions. Hydrogen enabled a marginal extension of the lean operating limit (LOL) for both fuels, with the potential of further extending the LOL if the stability criteria are changed. Hydrogen enrichment at both 15% and 30% by volume reduced engine-out NO emissions near the lean operating limit by more than 95% relative to stoichiometric ethanol operation while both the COV and HC emissions were kept low, making it a potentially competitive alternative to NO reduction through traditional three-way catalytic after-treatment. Power, thermal efficiency, and volumetric efficiency were not significantly affected by hydrogen addition at a given equivalence ratio; however, if hydrogen addition is used to decrease the lean operating limit, decreases in power and thermal efficiency were observed. Power in the lean combustion regime decreased by between 31 and 37% when compared to stoichiometric operation without hydrogen.
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Lean Combustion written by Derek Dunn-Rankin and published by Academic Press. This book was released on 2016-07-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lean Combustion: Technology and Control, Second Edition outlines and explains the latest advances in lean combustion technology and systems. Combustion under sufficiently fuel-lean conditions can have the desirable attributes of high efficiency and low emissions. The book offers readers both the fundamentals and latest developments in how lean burn (broadly defined) can increase fuel economy and decrease emissions, while still achieving desired power output and performance. This volume brings together research and design of lean combustion systems across the technology spectrum in order to explore the state-of-the-art in lean combustion. Readers will learn about advances in the understanding of ultra-lean fuel mixtures and how new types of burners and approaches to managing heat flow can reduce problems often found with lean combustion (such as slow, difficult ignition and frequent flame extinction). This book offers abundant references and examples of real-world applications. New to this edition are significantly revised chapters on IC engines and stability/oscillations, and new case studies and examples. Written by a team of experts, this contributed reference book aims to teach its reader to maximize efficiency and minimize both economic and environmental costs. - Presents a comprehensive collection of lean burn technology across potential applications, allowing readers to compare and contrast similarities and differences - Provides an extensive update on IC engines including compression ignition (diesel), spark ignition, and homogeneous charge compression ignition (HCCI) - Includes an extensive revision to the Stability/Oscillations chapter - Includes use of alternative fuels such as biogas and hydrogen for relevant technologies - Covers new developments in lean combustion using high levels of pre-heat and heat recirculating burners, as well as the active control of lean combustion instabilities
Download or read book Handbook of Hydrogen Energy written by S.A. Sherif and published by CRC Press. This book was released on 2014-07-29 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: Can hydrogen and electricity supply all of the world’s energy needs? Handbook of Hydrogen Energy thoroughly explores the notion of a hydrogen economy and addresses this question. The handbook considers hydrogen and electricity as a permanent energy system and provides factual information based on science. The text focuses on a large cross section of applications such as fuel cells and catalytic combustion of hydrogen. The book also includes information on inversion curves, physical and thermodynamic tables, and properties of storage materials, data on specific heats, and compressibility and temperature–entropy charts and more. Analyzes the principles of hydrogen energy production, storage, and utilization Examines electrolysis, thermolysis, photolysis, thermochemical cycles, and production from biomass and other hydrogen production methods Covers all modes of hydrogen storage: gaseous, liquid, slush, and metal hydride storage Handbook of Hydrogen Energy serves as a resource for graduate students, as well as a reference for energy and environmental engineers and scientists.
Download or read book Injection Technologies and Mixture Formation Strategies For Spark Ignition and Dual Fuel Engines written by Alessandro Ferrari and published by SAE International. This book was released on 2022-06-24 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel injection systems and performance is fundamental to combustion engine performance in terms of power, noise, efficiency, and exhaust emissions. There is a move toward electric vehicles (EVs) to reduce carbon emissions, but this is unlikely to be a rapid transition, in part due to EV batteries: their size, cost, longevity, and charging capabilities as well as the scarcity of materials to produce them. Until these isssues are resolved, refining the spark-ignited engine is necessary address both sustainability and demand for affordable and reliable mobility. Even under policies oriented to smart sustainable mobility, spark-ignited engines remain strategic, because they can be applied to hybridized EVs or can be fueled with gasoline blended with bioethanol or bio-butanol to drastically reduce particulate matter emissions of direct injection engines in addition to lower CO2 emissions. In this book, Alessandro Ferrari and Pietro Pizzo provide a full review of spark-ignited engine fuel injection systems. The most popular typologies of fuel injection systems are considered, with special focus on state-of-the-art solutions. Dedicated sections on the methods for air mass evaluation, fuel delivery low-pressure modules, and the specific subsystems for idle, cold start, and warm-up control are also included. The authors pay special attention to mixture formation strategies, as they are a fundamental theme for SI engines. An exhaustive overview of fuel injection technologies is provided, and mixture formation strategies for spark ignited combustion engines are considered. Fuel Injection Systems illustrates the performance of these systems and will also serve as a reference for engineers who are active in the aftermarket, offering detailed information on fuel injection system solutions that are mounted in older vehicles.
Download or read book Performance of a Spark Ignition Dual fueled Engine Using Split injection Timing written by Narun Suwanchotchoung and published by . This book was released on 2003 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Thermodynamics for Engineers written by D. Winterbone and published by Butterworth-Heinemann. This book was released on 2015-02-07 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Thermodynamics for Engineers, Second Edition introduces the basic concepts of thermodynamics and applies them to a wide range of technologies. Authors Desmond Winterbone and Ali Turan also include a detailed study of combustion to show how the chemical energy in a fuel is converted into thermal energy and emissions; analyze fuel cells to give an understanding of the direct conversion of chemical energy to electrical power; and provide a study of property relationships to enable more sophisticated analyses to be made of irreversible thermodynamics, allowing for new ways of efficiently covering energy to power (e.g. solar energy, fuel cells). Worked examples are included in most of the chapters, followed by exercises with solutions. By developing thermodynamics from an explicitly equilibrium perspective and showing how all systems attempt to reach equilibrium (and the effects of these systems when they cannot), Advanced Thermodynamics for Engineers, Second Edition provides unparalleled insight into converting any form of energy into power. The theories and applications of this text are invaluable to students and professional engineers of all disciplines. - Includes new chapter that introduces basic terms and concepts for a firm foundation of study - Features clear explanations of complex topics and avoids complicated mathematical analysis - Updated chapters with recent advances in combustion, fuel cells, and more - Solutions manual will be provided for end-of-chapter problems
Download or read book Design of Racing and High Performance Engines written by Joseph Harralson and published by SAE International. This book was released on 1995-02-01 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents, in a clear and easy-to-understand manner, the basic principles involved in the design of high performance engines. Editor Joseph Harralson first compiled this collection of papers for an internal combustion engine design course he teaches at the California State University of Sacramento. Topics covered include: engine friction and output; design of high performance cylinder heads; multi-cylinder motorcycle racing engines; valve timing and how it effects performance; computer modeling of valve spring and valve train dynamics; correlation between valve size and engine operating speed; how flow bench testing is used to improve engine performance; and lean combustion. In addition, two papers of historical interest are included, detailing the design and development of the Ford D.O.H.C. competition engine and the coventry climax racing engine.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993-11 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the third International Conference on Automotive and Fuel Technology written by and published by Allied Publishers. This book was released on 2004 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
