Download or read book Adhesion Between Polymers and Concrete Adh sion Entre Polym res Et B ton written by H. R. Sasse and published by Springer. This book was released on 1986 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface Adhesion is a phenomenon architects and civil engineers are not very familiar with. In other disciplines knowledge about surface properties and the background of bonding energies is also far from satisfactory; nevertheless there are many important· applications in concrete engineering, where adhesion is necessary for success and durability. These include: - coating and painting - repair of concrete surfaces - bonding of fresh to old concrete - crack injection - glueing of precast elements - glueing of steel to concrete, etc. In 1981 RILEM established the technical committee 52-RAC 'Resin Adherence to Concrete'. The main aims of the committee's work were - to collect research results and practical experiences - to initiate and coordinate research programs - to develop, on a scientific base, test methods for field and for laboratory purposes. One of the results of the committee's work is a state-of-the-art report, which will be presented orally as a General Report at the International Symposium ISAP '86, and will be printed either in the RILEM journal Materials and Structures or separately. Several test recommendations have been elaborated and will be prepared as drafts for the participants ofISAP '86. These are: - direct tensile test - pull-off test - direct shear test - slant shear test - four-point bending test - dynamic loading test - thermal compatibility test (two versions) - injectibility test.

Download or read book Machining written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2008-07-11 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining is one of the most important manufacturing processes. Parts manufactured by other processes often require further operations before the product is ready for application. “Machining: Fundamentals and Recent Advances” is divided into two parts. Part I explains the fundamentals of machining, with special emphasis on three important aspects: mechanics of machining, tools, and work-piece integrity. Part II is dedicated to recent advances in machining, including: machining of hard materials, machining of metal matrix composites, drilling polymeric matrix composites, ecological machining (minimal quantity of lubrication), high-speed machining (sculptured surfaces), grinding technology and new grinding wheels, micro- and nano-machining, non-traditional machining processes, and intelligent machining (computational methods and optimization). Advanced students, researchers and professionals interested or involved in modern manufacturing engineering will find the book a useful reference.

Download or read book Properties of UO2 written by J. Belle and published by . This book was released on 1957 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallic Magnetism written by I. A. Campbell and published by Springer. This book was released on 1987 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tribocorrosion written by Anna Igual Munoz and published by Springer Nature. This book was released on 2020-06-16 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a toolbox for identifying and addressing tribocorrosion situations from an engineering point of view. It is an accessible and introductory guideline to the emerging and interdisciplinary field of tribocorrosion covering the main concepts of tribology and corrosion. It describes specific tribocorrosion concepts, models and experimental techniques as well as their application to practical situations in which mechanical and chemical phenomena act simultaneously.

Download or read book Proceedings of the RILEM International Symposium on Bituminous Materials written by Hervé Di Benedetto and published by Springer Nature. This book was released on 2021-09-25 with total page 1806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in bituminous materials and structures and asphalt pavement technology, as presented by leading international researchers and engineers at the RILEM International Symposium on Bituminous Materials (ISBM), held in Lyon, France on December 14-16, 2020. The symposium represents a joint effort of three RILEM Technical Committees from Cluster F: 264-RAP “Asphalt Pavement Recycling”, 272-PIM “Phase and Interphase Behaviour of Bituminous Materials”, and 278-CHA “Crack-Healing of Asphalt Pavement Materials”. It covers a diverse range of topics concerning bituminous materials (bitumen, mastics, mixtures) and road, railway and airport pavement structures, including: recycling, phase and interphase behaviour, cracking and healing, modification and innovative materials, durability and environmental aspects, testing and modelling, multi-scale properties, surface characteristics, structure performance, modelling and design, non-destructive testing, back-analysis, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations.

Download or read book Nanolubricants written by Jean Michel Martin and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.

Download or read book Asphalt Pavements written by Y. Richard Kim and published by CRC Press. This book was released on 2014-11-06 with total page 1966 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt Pavements contains the proceedings of the International Conference on Asphalt Pavements (Raleigh, North Carolina, USA, 1-5 June 2014), and discusses recent advances in theory and practice in asphalt materials and pavements. The contributions cover a wide range of topics:- Environmental protection and socio-economic impacts- Additives and mo

Download or read book Modern Surface Organometallic Chemistry written by Jean-Marie Basset and published by John Wiley & Sons. This book was released on 2009-07-10 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering everything from the basics to recent applications, this monograph represents an advanced overview of the field. Edited by internationally acclaimed experts respected throughout the community, the book is clearly divided into sections on fundamental and applied surface organometallic chemistry. Backed by numerous examples from the recent literature, this is a key reference for all chemists.

Download or read book Friction at the Atomic Level written by Motohisa Hirano and published by John Wiley & Sons. This book was released on 2018-02-27 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by one of the most distinguished scientists and a pioneer in this field, this monograph represents a stand-alone, concise guide to friction at the atomic level. It brings together hitherto widely-scattered information in one single source, and is the first to explain the nature of friction in terms of atomistic mechanisms. In addition to his detailed description on modeling and simulation, the author stresses experimental approaches like AFM (Atomic Force Microscope) techniques for verification of theory. In this respect the book will benefit the whole nanotribology community, from graduate students who want to get the basics right up to researchers specializing in mechanical engineering, materials science, physics and chemistry.

Download or read book Advanced Materials Interfaces written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2016-06-22 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Material Interfaces is a state-of-the-art look at innovative methodologies and strategies adopted for interfaces and their applications. The 13 chapters are written by eminent researchers not only elaborate complex interfaces fashioned of solids, liquids, and gases, but also ensures cross-disciplinary mixture and blends of physics, chemistry, materials science, engineering and life sciences. Advanced interfaces operate fundamental roles in essentially all integrated devices. It is therefore of the utmost urgency to focus on how newly-discovered fundamental constituents and interfacial progressions can be materialized and used for precise purposes. Interfaces are associated in wide multiplicity of application spectrum from chemical catalysis to drug functions and the advancement is funnelled by fine-tuning of our fundamental understanding of the interface effects.

Download or read book Tribochemistry written by Gerqard Heinicke and published by Oxford University Press, USA. This book was released on 1988-05-12 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a comprehensive introduction to the scientific and technical aspects of tribochemistry, a field concerned with the chemical reactions initiated by mechanical energy. The relevant theoretical background, recent innovations and results, and the possibilities of expanding industrial applications are covered.

Download or read book Metal Cutting Mechanics written by Viktor P. Astakhov and published by CRC Press. This book was released on 1998-12-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Cutting Mechanics outlines the fundamentals of metal cutting analysis, reducing the extent of empirical approaches to the problems as well as bridging the gap between design and manufacture. The author distinguishes his work from other works through these aspects: considering the system engineering of the cutting process id

Download or read book Engine Tribology written by C.M. Taylor and published by Elsevier. This book was released on 1993-07-23 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Customer expectations and international competition are obliging car and commercial vehicle manufacturers to produce more efficient and cleaner products in shorter product cycle times. The consideration of Engine Tribology has a leading role to play in helping to achieve these goals. Specific areas of interdisciplinary interest include: design influences on fuel economy and emissions; new materials (ceramics, steels, coatings, lubricants, additives); low viscosity lubricants; and low heat rejection (adiabatic) engines.This volume gives a detailed and current review on some basic features of tribology particularly associated with internal combustion engines such as: lubrication analysis relevant to plain bearings, Hertzian contact theory and elastohydrodynamic lubrication associated with cams and followers and friction and wear in a general context. Several chapters examine engine bearings, valve trains, (cams and followers) and piston assemblies. For each machine element a background introduction is followed by design interpretations and a consideration of future developments. The important topic of materials, solids and lubricants is focused upon in the concluding chapters.The work will be of interest to engineers and researchers in the automobile, automotive products, petroleum and associated industries.

Download or read book Machining of Hard Materials written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard machining is a relatively recent technology that can be defined as a machining operation, using tools with geometrically defined cutting edges, of a work piece that has hardness values typically in the 45-70HRc range. This operation always presents the challenge of selecting a cutting tool insert that facilitates high-precision machining of the component, but it presents several advantages when compared with the traditional methodology based in finish grinding operations after heat treatment of work pieces. Machining of Hard Materials aims to provide the reader with the fundamentals and recent advances in the field of hard machining of materials. All the chapters are written by international experts in this important field of research. They cover topics such as: • advanced cutting tools for the machining of hard materials; • the mechanics of cutting and chip formation; • surface integrity; • modelling and simulation; and • computational methods and optimization. Machining of Hard Materials can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals in machining and related industries. It can also be used as a text for advanced undergraduate or postgraduate students studying mechanical engineering, manufacturing, or materials.

Download or read book Effects of Bearing bypass Load Interaction on Laminate Strength written by S. P. Garbo and published by . This book was released on 1981 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this program was structural evaluation of mechanically fastened composite joints. An add-on contract effort was performed to further evaluate the effects of bearing/bypass interaction on laminate strength. The results of the add-on contract are the subject of this report. The work performed under the original contract indicated additional studies were needed to further verify bolted composite joint strength methodology. The objective of this add on effort was evaluation of bearing versus bypass load interactions on laminate strength. Three laminates from the family of 0 deg, + or - 45 deg, and 90 deg ply orientations were tested to failure under a range of tension bypass to bearing load ratios. Predictions of laminate strength were obtained using the Bolted Joint Stress Field Model (BJSFM) described in Volumes 1 and 3 of AFWAL-TR-81-3041. Failure behavior of laminates was documented using ultrasonic C-scan techniques, and failure zones about the fastener hole were correlated with predictions. This report documents test procedures, test data, and theory/test correlations.

Download or read book Bioceramics 15 written by Besim Ben-Nissan and published by Trans Tech Publications Ltd. This book was released on 2003-05-15 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Since their inception Bioceramics meetings have provided a treasure house of information for both scientists and clinicians in the medical field. The clinical applications are numerous, in particular in the areas of orthopaedics, maxillofacial, plastic and ocular surgery, percutaneous devices, tissue engineering and sensors. This volume in addition to research papers contributed also presents selected overviews and discussions on recent bioceramics research and trends.