Download or read book Lathe Breakdown Tests of Some High Speed Tool Steels Classic Reprint written by H. J. French and published by Forgotten Books. This book was released on 2017-10-27 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Lathe Breakdown Tests of Some High-Speed Tool Steels Comparison Of the breakdown and Taylor tests is not within the scope Of this report. The former is accepted because it has found commercial application, and a portion of the work described in subsequent paragraphs may be characterized as a critical survey Of this method Of test. The cutting speeds, feed, depth of cut, and general test conditions approximated those used in a number of cases for the purchase Of large quantities of steel. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Download or read book Lathe Breakdown Tests of Some Modern High speed Tool Steels written by Herbert James French and published by . This book was released on 1923 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lathe Breakdown Tests of Some Modern High speed Tool Steels written by Herbert James French and published by . This book was released on 1923 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lathe Breakdown Tests of Some Modern High speed Tool Steels by H J French and Jerome Strauss written by Jerome Strauss and published by . This book was released on 1923 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.

Download or read book Gear Materials Properties and Manufacture written by Joseph R. Davis and published by ASM International. This book was released on 2005 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: All of the critical technical aspects of gear materials technology are addressed in this new reference work. Gear Materials, Properties, and Manufacture is intended for gear metallurgists and materials specialists, manufacturing engineers, lubrication technologists, and analysts concerned with gear failures who seek a better understanding of gear performance and gear life. This volume complements other gear texts that emphasize the design, geometry, and theory of gears. The coverage begins with an overview of the various types of gears used, important gear terminology, applied stresses and strength requirements associated with gears, and lubrication and wear. This is followed by in-depth treatment of metallic (ferrous and nonferrous alloys) and plastic gear materials. Emphasis is on the properties of carburized steels, the material of choice for high-performance power transmission gearing.

Download or read book Handbook of High Speed Machining Technology written by Robert King and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States now spends approximately $115 billion annually to perform its metal removal tasks using conventional machining technology. Of this total amount, about $14 billion is invested in the aerospace and associated industries. It becomes clear that metal removal technology is a very important candidate for rigorous investigation looking toward improvement of productivity within the manufacturing system. To aid in this endeavor, work has begun to establish a new scientific and technical base that will provide principles upon which manufacturing decisions may be based. One of the metal removal areas that has the potential for great economic advantages is high-speed machining and related technology. This text is concerned with discussions of ways in which high-speed machining systems can solve immediate problems of profiling, pocketing, slotting, sculpturing, facing, turning, drilling, and thin-walled sectioning. Benefits to many existing programs are provided by aiding in solving a current management production problem, that of efficiently removing large volumes of metal by chip removal. The injection of new high-rate metal removal techniques into conventional production procedures, which have remained basically unchanged for a century, presents a formidable systems problem, both technically and man agerially.The proper solution requires a sophisticated, difficult process whereby management-worker relationships are reassessed, age-old machine deSigns reevaluated, and a new vista of product/process planning and design admitted.

Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by . This book was released on 1995 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are involved with machining or metalworking or you specify materials for industrial components, this book is an absolute must. It gives you detailed and comprehensive information about the selection, processing, and properties of materials for machining and metalworking applications. They include wrought and powder metallurgy tool steels, cobalt base alloys, cemented carbides, cermets, ceramics, and ultra-hard materials. You'll find specific guidelines for optimizing machining productivity through the proper selection of cutting tool materials plus expanded coverage on the use of coatings to extend cutting tool and die life. There is also valuable information on alternative heat treatments for improving the toughness of tool and die steels. All new material on the correlation of heat treatment microstructures and properties of tool steels is supplemented with dozens of photomicrographs. Information on special tooling considerations for demanding applications such as isothermal forging, die casting of metal matrix composites, and molding of corrosive plastics is also included. And you'll learn about alternatives to ferrous materials for metalworking applications such as carbides, cermets, ceramics, and nonferrous metals like aluminum, nickel, and copper base alloys.

Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1995-01-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are involved with machining or metalworking or you specify materials for industrial components, this book is an absolute must. It gives you detailed and comprehensive information about the selection, processing, and properties of materials for machining and metalworking applications. They include wrought and powder metallurgy tool steels, cobalt base alloys, cemented carbides, cermets, ceramics, and ultra-hard materials. You'll find specific guidelines for optimizing machining productivity through the proper selection of cutting tool materials plus expanded coverage on the use of coatings to extend cutting tool and die life. There is also valuable information on alternative heat treatments for improving the toughness of tool and die steels. All new material on the correlation of heat treatment microstructures and properties of tool steels is supplemented with dozens of photomicrographs. Information on special tooling considerations for demanding applications such as isothermal forging, die casting of metal matrix composites, and molding of corrosive plastics is also included. And you'll learn about alternatives to ferrous materials for metalworking applications such as carbides, cermets, ceramics, and nonferrous metals like aluminum, nickel, and copper base alloys.

Download or read book Machinery s Handbook Pocket Companion written by Richard Pohanish and published by . This book was released on 2024-04-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since publication of the first edition more than 100 years ago, Machinery's Handbook has been acclaimed as the most popular, bestselling engineering resource of all time. Universally considered the principal reference in the manufacturing, mechanical, and metalworking industries, the Handbook is the ultimate collection of essential information. A concise yet authoritative, highly useful reference that draws its content from the Machinery's Handbook, the latest Machinery's Handbook Pocket Companion is an ideal quick resource for students and professionals in manufacturing, metalworking, and related fields for whom convenient access to the most basic data is essential. This expertly curated collection includes tables, charts, and text selected from the Handbook. Much of the information has been reorganized, distilled, or simplified to increase the usefulness of this data-rich resource, while keeping it compact. Designed as a time saver, the Pocket Companion is not intended to replace the new Machinery's Handbook, 32nd Edition. Instead, it serves as a handy and more portable complement to the Handbook's vast collection of text, data, and Standards information. Features A handy, portable, and time-saving, quick-access complement to the larger compilation of explanatory text, extensive data, and vital Standards information in the Machinery's Handbook. Revised to reflect numerous changes made in the 32nd Edition, the new Pocket Companion includes updated Standards, key revisions, and even more tables. Students and professionals will find the Pocket Companion a compact ready-reference to keep nearby while mastering fundamentals and solving problems, working on engineering designs, or seeking essential specifications daily on the shop or factory floor. In addition to the printed book, the Pocket Companion also is sold as an eBook. For information on this handy format, as well as the Machinery's Handbook 32 Digital Edition, the eBook version of the Machinery's Handbook Guide, and other digital products, visit the Industrial Press eBookStore site at ebooks.industrialpress.com.

Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.

Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2018-09-03 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.

Download or read book Metal Machining written by P.R.N. Childs and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal machining is the most widespread metal-shaping process in the mechanical manufacturing industry. World-wide investment in metal machining tools increases year on year - and the wealth of nations can be judged by it. This text - the most up-to-date in the field - provides in-depth discussion of the theory and application of metal machining at an advanced level. It begins with an overview of the development of metal machining and its role in the current industrial environment and continues with a discussion of the theory and practice of machining. The underlying mechanics are analysed in detail and there are extensive chapters examining applications through a discussion of simulation and process control. "Metal Machining: Theory and Applications" is essential reading for senior undergraduates and postgraduates specialising in cutting technology. It is also an invaluable reference tool for professional engineers. Professors Childs, Maekawa, Obikawa and Yamane are four of the leading authorities on metal machining and have worked together for many years. Of interest to all mechanical, manufacturing and materials engineers Theoretical and practical problems addressed

Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.

Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.

Download or read book An Evolutionary Theory of Economic Change written by Richard R. Nelson and published by Harvard University Press. This book was released on 1985-10-15 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the most sustained and serious attack on mainstream, neoclassical economics in more than forty years. Nelson and Winter focus their critique on the basic question of how firms and industries change overtime. They marshal significant objections to the fundamental neoclassical assumptions of profit maximization and market equilibrium, which they find ineffective in the analysis of technological innovation and the dynamics of competition among firms. To replace these assumptions, they borrow from biology the concept of natural selection to construct a precise and detailed evolutionary theory of business behavior. They grant that films are motivated by profit and engage in search for ways of improving profits, but they do not consider them to be profit maximizing. Likewise, they emphasize the tendency for the more profitable firms to drive the less profitable ones out of business, but they do not focus their analysis on hypothetical states of industry equilibrium. The results of their new paradigm and analytical framework are impressive. Not only have they been able to develop more coherent and powerful models of competitive firm dynamics under conditions of growth and technological change, but their approach is compatible with findings in psychology and other social sciences. Finally, their work has important implications for welfare economics and for government policy toward industry.

Download or read book The Structuring of Organizations written by Henry Mintzberg and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesizes the empirical literature on organizationalstructuring to answer the question of how organizations structure themselves --how they resolve needed coordination and division of labor. Organizationalstructuring is defined as the sum total of the ways in which an organizationdivides and coordinates its labor into distinct tasks. Further analysis of theresearch literature is neededin order to builda conceptualframework that will fill in the significant gap left by not connecting adescription of structure to its context: how an organization actuallyfunctions. The results of the synthesis are five basic configurations (the SimpleStructure, the Machine Bureaucracy, the Professional Bureaucracy, theDivisionalized Form, and the Adhocracy) that serve as the fundamental elementsof structure in an organization. Five basic parts of the contemporaryorganization (the operating core, the strategic apex, the middle line, thetechnostructure, and the support staff), and five theories of how it functions(i.e., as a system characterized by formal authority, regulated flows, informalcommunication, work constellations, and ad hoc decision processes) aretheorized. Organizations function in complex and varying ways, due to differing flows -including flows of authority, work material, information, and decisionprocesses. These flows depend on the age, size, and environment of theorganization; additionally, technology plays a key role because of itsimportance in structuring the operating core. Finally, design parameters aredescribed - based on the above five basic parts and five theories - that areused as a means of coordination and division of labor in designingorganizational structures, in order to establish stable patterns of behavior.(CJC).