Download or read book Latest Advances in Electrothermal Models written by Krzysztof Górecki and published by MDPI. This book was released on 2021-03-17 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the latest advances in the area of electrothermal modelling of electronic components and networks. It contains eight sections by different teams of authors. These sections contain the results of: (a) electro-thermal simulations of SiC power MOSFETs using a SPICE-like simulation program; (b) modelling thermal properties of inductors taking into account the influence of the core volume on the efficiency of heat removal; (c) investigations into the problem of inserting a temperature sensor in the neighbourhood of a chip to monitor its junction temperature; (d) computations of the internal temperature of power LEDs situated in modules containing multiple-power LEDs, taking into account both self-heating in each power LED and mutual thermal couplings between each diode; (e) analyses of DC-DC converters using the electrothermal averaged model of the diode–transistor switch, including an IGBT and a rapid-switching diode; (f) electrothermal modelling of SiC power BJTs; (g) analysis of the efficiency of selected algorithms used for solving heat transfer problems at nanoscale; (h) analysis related to thermal simulation of the test structure dedicated to heat-diffusion investigation at the nanoscale.
Download or read book Latest Advances in Electrothermal Models written by Krzysztof Górecki and published by . This book was released on 2021 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the latest advances in the area of electrothermal modelling of electronic components and networks. It contains eight sections by different teams of authors. These sections contain the results of: (a) electro-thermal simulations of SiC power MOSFETs using a SPICE-like simulation program; (b) modelling thermal properties of inductors taking into account the influence of the core volume on the efficiency of heat removal; (c) investigations into the problem of inserting a temperature sensor in the neighbourhood of a chip to monitor its junction temperature; (d) computations of the internal temperature of power LEDs situated in modules containing multiple-power LEDs, taking into account both self-heating in each power LED and mutual thermal couplings between each diode; (e) analyses of DC-DC converters using the electrothermal averaged model of the diode-transistor switch, including an IGBT and a rapid-switching diode; (f) electrothermal modelling of SiC power BJTs; (g) analysis of the efficiency of selected algorithms used for solving heat transfer problems at nanoscale; (h) analysis related to thermal simulation of the test structure dedicated to heat-diffusion investigation at the nanoscale.
Download or read book Recent Advances in Hybrid and Electric Automotive Technologies written by V. Krishna and published by Springer Nature. This book was released on 2022-08-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of International Conference on Hybrid and Electric Automotive Technologies 2021 (HEAT 2021). It cover recent innovations in electric and hybrid-electric vehicles and autonomous vehicles. Various topics covered in this volume are batteries, battery cooling methodologies, use of nano-coolants, electrified powertrain systems and components, hybridisation infrastructure, energy storage, and many other topics of importance to the industry. The book will be useful for researchers and professionals working in the areas of automobile and vehicle engineering.
Download or read book Recent Advances in Mechanism Design for Robotics written by Shaoping Bai and published by Springer. This book was released on 2015-05-05 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the Proceedings of the 3rd IFToMM Symposium on Mechanism Design for Robotics, held in Aalborg, Denmark, 2-4 June, 2015. The book contains papers on recent advances in the design of mechanisms and their robotic applications. It treats the following topics: mechanism design, mechanics of robots, parallel manipulators, actuators and their control, linkage and industrial manipulators, innovative mechanisms/robots and their applications, among others. The book can be used by researchers and engineers in the relevant areas of mechanisms, machines and robotics.
Download or read book Recent Advances In Circuits And Systems written by Nikos E Mastorakis and published by World Scientific. This book was released on 1998-10-12 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Advances in Circuits and Systems brings you a balanced, state-of-the-art presentation of the latest concepts, methods, algorithms, techniques, procedures and applications of the fascinating field of Circuits and Systems. Written by eminent, leading, international experts, the contributors provide up-to-date aspects of topics discussed and present fresh, original insights into their own experience with Circuits and Systems.The main aim of this book is to present most of the new trends and recent advances of the impressive evolution in the discipline of circuits and systems. Special emphasis is given in the interaction between the classic areas of systems theory (feedback control, circuits design, electronics, etc) and the modern techniques of computational intelligence (neural networks, genetic algorithms, fuzzy logic and expert systems) since this fertile interaction promises to open up new horizons in circuits and systems theory.This book is composed of four parts. Part I is devoted to Circuits and Electronics and also includes Power Systems. Part II refers to Systems Theory and Control (H infinity problems, feedback control, non-linear systems, robust stability and robust control, multivariable systems, hybrid systems and hydraulic systems). Part III presents the latest developments in the Robotics (theory and applications) while Part IV is devoted to Computational Intelligence in Systems Theory.
Download or read book Recent Advances in Power Systems written by Jitendra Kumar and published by Springer Nature. This book was released on with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Energy Technologies written by N. Lakshmi Narasimhan and published by Springer Nature. This book was released on 2022-09-29 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the first International Conference on Energy and Materials Technologies (ICEMT) 2021, organized by the Department of Mechanical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam, India. It covers the recent technologies in two broad thematic areas: energy and materials. Various topics covered in this book include hybrid energy, advanced energy systems, energy management, energy policy, geothermal, nuclear energy, bio-energy, waste to energy, power plants, and automotives. The book will be useful for students, researchers, and professionals in the area of mechanical engineering, especially various domains of energy.
Download or read book Proceedings of 2019 International Conference on Optoelectronics and Measurement written by Yingquan Peng and published by Springer. This book was released on 2021-03-16 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-quality papers from the 2019 International Conference on Optoelectronics and Measurement (ICOM2019) which was held on November 28–30, 2019, in Hangzhou, China. It focuses on the latest developments in the fields of optics, photonics, optoelectronics, sensors, and related measurement technology. Being closely related to either the key device technology or the important commercial applications, topics of fiber optics, photodetectors, sensors, and measurement technology are of particular interest for the readers. The book contains the illustrations of advanced device technologies, measurement principles, as well as scientific and technological conclusions of the great reference value. The readers will gain deep insight into the latest development in the related fields, obtain important technical data and scientific conclusions, and inspire new ideas for their research.
Download or read book NISTIR written by and published by . This book was released on 2001 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Modeling and Optimization of Manufacturing Processes written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Modeling and Optimization of Manufacturing Processes presents a comprehensive review of the latest international research and development trends in the modeling and optimization of manufacturing processes, with a focus on machining. It uses examples of various manufacturing processes to demonstrate advanced modeling and optimization techniques. Both basic and advanced concepts are presented for various manufacturing processes, mathematical models, traditional and non-traditional optimization techniques, and real case studies. The results of the application of the proposed methods are also covered and the book highlights the most useful modeling and optimization strategies for achieving best process performance. In addition to covering the advanced modeling, optimization and environmental aspects of machining processes, Advanced Modeling and Optimization of Manufacturing Processes also covers the latest technological advances, including rapid prototyping and tooling, micromachining, and nano-finishing. Advanced Modeling and Optimization of Manufacturing Processes is written for designers and manufacturing engineers who are responsible for the technical aspects of product realization, as it presents new models and optimization techniques to make their work easier, more efficient, and more effective. It is also a useful text for practitioners, researchers, and advanced students in mechanical, industrial, and manufacturing engineering.
Download or read book Advances in Microelectronics Reviews Vol 2 written by Sergey Yurish and published by Lulu.com. This book was released on 2019-08-06 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd volume of 'Advances in Microelectronics: Reviews' Book Series is written by 57 contributors from academy and industry from 11 countries (Bulgaria, Hungary, Iran, Japan, Malaysia, Romania, Russia, Slovak Republic, Spain, Ukraine and USA). The book contains 13 chapters from different areas of microelectronics: MEMS, materials characterization, and various microelectronic devices. With unique combination of information in each volume, the Book Series will be of value for scientists and engineers in industry and at universities. Each of chapter is ending by well selected list of references with books, journals, conference proceedings and web sites. This book ensures that readers will stay at the cutting edge of the field and get the right and effective start point and road map for the further researches and developments.
Download or read book Advances in Mechanism and Machine Science written by Tadeusz Uhl and published by Springer. This book was released on 2019-06-13 with total page 4248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 15th IFToMM World Congress, which was held in Krakow, Poland, from June 30 to July 4, 2019. Having been organized every four years since 1965, the Congress represents the world’s largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Innovative Development in Micromanufacturing Processes written by Pawan Kumar Rakesh and published by CRC Press. This book was released on 2023-11-23 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Development in Micromanufacturing Processes details cutting edge technologies in micromanufacturing processes, an industry which has undergone a technological transformation in the past decade. Enabling engineers to create high performance, low cost, and long-lasting products, this book is an essential companion to all those working in micro and nano engineering. As products continue to get smaller and smaller, the field of micromanufacturing has gained an international audience. This book looks at both approaches of micromanufacturing: top-down and bottom-up. The top-down approach includes subtractive micromanufacturing processes such as microturning, micromilling, microdrilling, laser beam micromachining, and magnetic abrasive finishing. The bottom-up approach involves additive manufacturing processes such as micro-forming, micro deep drawing, microforging, microextrusion, and microwelding. Additionally, microjoining and microhybrid manufacturing processes are discussed in detail. The book also aids engineers and students in solving common manufacturing issues such as choice of materials and testing. The book will be of interest to those working in micro and nano engineering and machining, as well as students in manufacturing engineering, materials science, and more.
Download or read book Plug in Hybrid Electric Vehicle PHEV written by Joeri Van Mierlo and published by MDPI. This book was released on 2019-08-27 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate change, urban air quality, and dependency on crude oil are important societal challenges. In the transportation sector especially, clean and energy efficient technologies must be developed. Electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) have gained a growing interest in the vehicle industry. Nowadays, the commercialization of EVs and PHEVs has been possible in different applications (i.e., light duty, medium duty, and heavy duty vehicles) thanks to the advances in energy storage systems, power electronics converters (including DC/DC converters, DC/AC inverters, and battery charging systems), electric machines, and energy efficient power flow control strategies. This book is based on the Special Issue of the journal Applied Sciences on “Plug-In Hybrid Electric Vehicles (PHEVs)”. This collection of research articles includes topics such as novel propulsion systems, emerging power electronics and their control algorithms, emerging electric machines and control techniques, energy storage systems, including BMS, and efficient energy management strategies for hybrid propulsion, vehicle-to-grid (V2G), vehicle-to-home (V2H), grid-to-vehicle (G2V) technologies, and wireless power transfer (WPT) systems.
Download or read book Innovative Food Processing Technologies written by and published by Elsevier. This book was released on 2020-08-18 with total page 2482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food process engineering, a branch of both food science and chemical engineering, has evolved over the years since its inception and still is a rapidly changing discipline. While traditionally the main objective of food process engineering was preservation and stabilization, the focus today has shifted to enhance health aspects, flavour and taste, nutrition, sustainable production, food security and also to ensure more diversity for the increasing demand of consumers. The food industry is becoming increasingly competitive and dynamic, and strives to develop high quality, freshly prepared food products. To achieve this objective, food manufacturers are today presented with a growing array of new technologies that have the potential to improve, or replace, conventional processing technologies, to deliver higher quality and better consumer targeted food products, which meet many, if not all, of the demands of the modern consumer. These new, or innovative, technologies are in various stages of development, including some still at the R&D stage, and others that have been commercialised as alternatives to conventional processing technologies. Food process engineering comprises a series of unit operations traditionally applied in the food industry. One major component of these operations relates to the application of heat, directly or indirectly, to provide foods free from pathogenic microorganisms, but also to enhance or intensify other processes, such as extraction, separation or modification of components. The last three decades have also witnessed the advent and adaptation of several operations, processes, and techniques aimed at producing high quality foods, with minimum alteration of sensory and nutritive properties. Some of these innovative technologies have significantly reduced the thermal component in food processing, offering alternative nonthermal methods. Food Processing Technologies: A Comprehensive Review, Three Volume Set covers the latest advances in innovative and nonthermal processing, such as high pressure, pulsed electric fields, radiofrequency, high intensity pulsed light, ultrasound, irradiation and new hurdle technology. Each section will have an introductory article covering the basic principles and applications of each technology, and in-depth articles covering the currently available equipment (and/or the current state of development), food quality and safety, application to various sectors, food laws and regulations, consumer acceptance, advancements and future scope. It will also contain case studies and examples to illustrate state-of-the-art applications. Each section will serve as an excellent reference to food industry professionals involved in the processing of a wide range of food categories, e.g., meat, seafood, beverage, dairy, eggs, fruits and vegetable products, spices, herbs among others.
Download or read book Advanced Machining Science written by Vijay Kumar Jain and published by CRC Press. This book was released on 2022-09-30 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: As machining processes become more advanced, so does the science behind them. This book emphasizes these scientific developments in addition to the more widely covered technological aspects, providing a full understanding of how machining has adapted to material constraints and moved beyond conventional methods in recent years. Numerous processes have been developed to allow the use of increasingly tough, corrosion-resistant, and temperature-resistant materials in machining. The advanced machining processes covered in this book range from mechanical, thermoelectric, and electrochemical, including abrasive water jet machining, electric discharge machining and micromachining, ion beam machining, and hybrid processes. It also addresses the sustainability issues raised by these processes. The underlying science of machining is centered throughout, as none of these processes can reach their full potential without both technical expertise and scientific understanding. Advanced Machining Science and its scientific approach will be of particular interest to students, researchers, and shop floor engineers.
Download or read book Advanced Problem in Mechanics II written by D. A. Indeitsev and published by Springer Nature. This book was released on 2022-03-19 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on original theories and approaches in the field of mechanics. It reports on both theoretical and applied researches, with a special emphasis on problems and solutions at the interfaces of mechanics and other research areas. The respective chapters highlight cutting-edge works fostering development in fields such as micro- and nanomechanics, material science, physics of solid states, molecular physics, astrophysics, and many others. Special attention has been given to outstanding research conducted by young scientists from all over the world. This book is based on the 48th edition of the international conference “Advanced Problems in Mechanics”, which was held in 2020, in St. Petersburg, Russia, and co-organized by The Peter the Great St. Petersburg Polytechnic University and the Institute for Problems in Mechanical Engineering of the Russian Academy of Sciences, under the patronage of the Russian Academy of Sciences. It provides researchers and graduate students with an extensive overview of the latest research and a source of inspiration for future developments and collaborations in mechanics and related fields.
